OSTC Mk.2, 2N and 2C :  heinrichs weikamp forum The fastest message board... ever.
Legacy OSTC's 
Pages: Previous12
Current Page: 2 of 2
Re: New 2.70 firmware
Posted by: Jean-François ()
Date: June 27, 2013 10:20AM

@ Teasy,

I don't know if your problem is related to v2.70. I will check very soon. I had the same problem lately (v2.50) and I've talked to Nick and he corrected it and put out a beta that you can find on the forum under support.

Hope that helps.

OSTC Mk2N 2287

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Jean-François ()
Date: June 27, 2013 10:33AM

I've just downloaded 5 new dives onto Mac Dive and everything is working well. Profile is good, temperature are back to normal.

Here is the beta you can use : [www.mac-dive.com]

OSTC Mk2N 2287

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Teasy ()
Date: June 27, 2013 04:56PM

Jean-François Wrote:
-------------------------------------------------------
> I've just downloaded 5 new dives onto Mac Dive and
> everything is working well. Profile is good,
> temperature are back to normal.
>
> Here is the beta you can use :
> [www.mac-dive.com]
> 1433

Die beta benutze ich hilft, aber nicht. thumbs downthumbs down

Bis dann
Jan

<<<OSTC 2N 6368>>>

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: heinrichsweikamp ()
Date: June 28, 2013 01:22PM

Wird der TG im internen Logbuch richtig angezeigt?

Gruß,
Matthias

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Teasy ()
Date: June 28, 2013 02:54PM

heinrichsweikamp Wrote:
-------------------------------------------------------
> Wird der TG im internen Logbuch richtig
> angezeigt?
>
> Gruß,
> Matthias

Ja da ist alles OK

In OSTCTools wird es richtig angezeigt.thumbs up

In Mac Dive 2.2.3.(letzte Beta) ist es falsch.thumbs down

Alles nach dem 1. und 2. Gaswechsel stimmt nicht.

NACHTRAG: Subsurface 3.1-11 läuft

Bis dann
Jan

<<<OSTC 2N 6368>>>



Edited 2 time(s). Last edit at 06/28/2013 03:39PM by Teasy.

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: divinglog ()
Date: June 28, 2013 03:14PM

Funktioniert es mit Diving Log oder muss ich da auch etwas anpassen?

Schöne Grüße,
Sven

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Teasy ()
Date: June 28, 2013 03:29PM

divinglog Wrote:
-------------------------------------------------------
> Funktioniert es mit Diving Log oder muss ich da
> auch etwas anpassen?
>
> Schöne Grüße,
> Sven

Kann ich nicht sagen, verwende eigentlich nur noch meinen MAC, nur zum Test habe ich auf das alte Datengrab PC mit Win98 OSTCTools installiert.

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Squalou ()
Date: July 01, 2013 03:00PM

hello
I already wrote another post.
After flashing 2.7, the color of active gaz stay as inactive except for the first gaz.
I compare with another OSTC 2N not flashed and this one works properly.

For simulator it is much more long.
Friend of mine has also trouble after flashing : its simulate only with the first active gaz and do not simulate with the 3 gaz setup.
The color also does not become as "active". (color inactive is pink on mine)

Can somebody check if problems of colors for all active gaz (fewer choice than ostc 2n)

thanks

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: heinrichsweikamp ()
Date: July 01, 2013 03:18PM

Hi,

2N and 2C have the exact same firmware (If they are both on 2.7), so
- they compute at the same speed
- they have the same choice of colors
- deactivated gases are shown in the CF64 color

Please, reset your settings to default (Menu -> Reset Menu -> Reset Gas & CF & Deco) and have a look at it again...

Regards,
Matthias

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Squalou ()
Date: July 01, 2013 05:18PM

Thanks for your answer.
I check again.
The depth by default was ok but not "changer" (the one just up)
now the colors are correct
and simulator also

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Ciro1982811 ()
Date: July 08, 2013 05:08PM

Just a little try of the new firmware 2.7 in a 129mt 22' BT, Runtime 221min GF10/100 dive, on a new discovered wreck in Gorgona Island, Livorno, Italy.

Everything worked fine.. except that maybe 10/100 is too aggressive, i was expecting almost 15-20 min more deco.

And as a result, i got some pain in joints and head swinging for some hours after the dive..!!!

Good job with the firmware!

Attachments: 00006_06-07-2013_129m_220min.dive (22.8 KB)  
Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Bardass ()
Date: July 08, 2013 05:23PM

why did you choose GF10/100 instead of 10/75 for example ?
10/100 is very agressive for shallowest stops.
Firmware 2.7 does not require such a setting

Bardass



Edited 1 time(s). Last edit at 07/08/2013 05:58PM by Bardass.

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: heinrichsweikamp ()
Date: July 08, 2013 06:13PM

Ciro1982811 Wrote:
-------------------------------------------------------
> Just a little try of the new firmware 2.7 in a
> 129mt 22' BT, Runtime 221min GF10/100 dive, on a

The OSTC2 is not intend to be used in this depth.

> Everything worked fine.. except that maybe 10/100
> is too aggressive, i was expecting almost 15-20
> min more deco.
>
> And as a result, i got some pain in joints and
> head swinging for some hours after the dive..!!!

You really should think about your dive plans. And: If you really dive that aggressive, I wouldn't tell anyone online.

There aren't any extra margins in the OSTC, the red CF warning you may have noticed is there for a reason.

Anyway: Have fun diving and add some more safety margin in the future.

Cheers,
Matthias

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: PeterK ()
Date: July 08, 2013 07:57PM

After a nice week end with a couple of longer and deeper dives using Trimix, air, and nitrox I've encountered no problems with FW 2.70. Everything worked just fine.

Did not download the profiles though.

Regards

Peter

OSTC 2N #2338

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Ciro1982811 ()
Date: July 08, 2013 09:53PM

heinrichsweikamp Wrote:
-------------------------------------------------------
> Ciro1982811 Wrote:
> --------------------------------------------------
> -----
> > Just a little try of the new firmware 2.7 in a
> > 129mt 22' BT, Runtime 221min GF10/100 dive, on
> a
>
> The OSTC2 is not intend to be used in this depth.
>
> > Everything worked fine.. except that maybe
> 10/100
> > is too aggressive, i was expecting almost
> 15-20
> > min more deco.
> >
> > And as a result, i got some pain in joints and
> > head swinging for some hours after the
> dive..!!!
>
> You really should think about your dive plans.
> And: If you really dive that aggressive, I
> wouldn't tell anyone online.
>
> There aren't any extra margins in the OSTC, the
> red CF warning you may have noticed is there for a
> reason.
>
> Anyway: Have fun diving and add some more safety
> margin in the future.
>
> Cheers,
> Matthias

Hi mathias. that was the first time I tried to set GF in that aggressive way, because when i did extremely deep and long dives with 10/90 and with previous firmware, it seemed me that the last oxygen stops at 6 and 3 mtrs was excessively too long compared to previous used softwares.

BUT that last one was the deeper and longest dive i ever made, and this time I had no reference with previous dives.

With 10/100 i think the 36 to 9 mtrs stops was a bit too much aggressive and the oxy stops instead was right (almost 80 minutes). I was feeling right and strong till the end of the dive, so i decided that i was ok and went out of water. Little pains and head swinging begun 10 minutes later and persisted till the night. _I think that this was really near the limit, so next time i'll go back to 10/90 and plan longer dives!! grinning smileygrinning smiley

Anyway, here is some photo shots of the dive, excellent visibility, more than 40 mtrs at the bottom!

Gorgona island deep wreck exploration -136 mtrs

Cheers, Ciro.

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: reivilos ()
Date: July 08, 2013 11:48PM

Ciro1982811 Wrote:

> Anyway, here is some photo shots of the dive,
> excellent visibility, more than 40 mtrs at the
> bottom!
>
> [url=https://www.facebook.com/ciro.osimo/media_set
> ?set=a.10201649879078251.1073741828.1517378023&typ
> e=1]Gorgona island deep wreck exploration -136
> mtrs[/url]
>
> Cheers, Ciro.

Fantastic Dive !!! Outstanding ...
Maybe you should ask Dr. Gardette at COMEX in Marseille for some "better" dive plan than ZHL-16. I think he would provide them on an individual basis.

Olivier.
OSTC 2N #3059

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: PeterK ()
Date: July 14, 2013 03:35PM

Update: Just found the time to download the last dives, no problem with FW 2.70 and Diving Log 5.0

No issue U/W either, however max depth was only 55m smiling bouncing smiley

Regards

Peter

OSTC 2N #2338

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Adam ()
Date: July 17, 2013 10:04PM

Dear All,
well up two weeks I use V.2.7 all is okey ... but logbook... my OSTC switch only last three dive not more ....I don't see dive no 4/no 5/no 6 ... etc. in early version is okey but version 2.7 don't display this info.
Regards
adam

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: Dahab Boris ()
Date: July 19, 2013 11:58AM

Nice one HW - great work, love the format.. Works for me :-)

Cheers,
DB

OSTC 2n of course :-)

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: heinrichsweikamp ()
Date: July 19, 2013 12:19PM

Adam Wrote:
-------------------------------------------------------
> Dear All,
> well up two weeks I use V.2.7 all is okey ... but
> logbook... my OSTC switch only last three dive not

As send in email this is related to your very detailed logbook recording settings you mailed us. Increase the sampling time from 2 to 10seconds again.

regards,
Matthias

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: gorcio ()
Date: July 21, 2013 06:38PM

Just came back from holidays, flashed to 2.70 and testing tomorrow. But on the new CFs, I noticed that safety stop time is limited in time to 4minutes 10 seconds ? Strange number ... why not allowing only full/half-minutes increments and reasonable limit ?

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: gordon mackie ()
Date: August 01, 2013 09:37AM

I upgraded to 2.70 and was confused because I didn't know the gaslist was for OC and DIL menu was for CC, I changed my gas to 16/46 but it kept showing DIL as air.. I looked through the manual including the version on the website and couldn't see any mention of using DIL menu for CC or any change

I came across it by going through the menus and set everything up OK but it might be an idea to publicise it more or update the manual as I couldn't se anything obvious in the Forum or in the manual (which shows v 3.0 in the photo)

I hadn't spotted it before because I was diving air DIL

Or maybe I am missing something obvious... it wouldn't be the first time :-)

46 years diving! Must be Doing It Right :-)

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: buk@nero ()
Date: August 21, 2013 07:03PM

Ciro1982811 Wrote:
-------------------------------------------------------
> heinrichsweikamp Wrote:
> --------------------------------------------------
> -----
> > Ciro1982811 Wrote:
> >
> --------------------------------------------------
>
> > -----
> > > Just a little try of the new firmware 2.7 in
> a
> > > 129mt 22' BT, Runtime 221min GF10/100 dive,
> on
> > a
> >
> > The OSTC2 is not intend to be used in this
> depth.
> >
> > > Everything worked fine.. except that maybe
> > 10/100
> > > is too aggressive, i was expecting almost
> > 15-20
> > > min more deco.
> > >
> > > And as a result, i got some pain in joints
> and
> > > head swinging for some hours after the
> > dive..!!!
> >
> > You really should think about your dive plans.
> > And: If you really dive that aggressive,
> I
> > wouldn't tell anyone online.
> >
> > There aren't any extra margins in the OSTC, the
> > red CF warning you may have noticed is there for
> a
> > reason.
> >
> > Anyway: Have fun diving and add some more
> safety
> > margin in the future.
> >
> > Cheers,
> > Matthias
>
> Hi mathias. that was the first time I tried to set
> GF in that aggressive way, because when i did
> extremely deep and long dives with 10/90 and with
> previous firmware, it seemed me that the last
> oxygen stops at 6 and 3 mtrs was excessively too
> long compared to previous used softwares.
>
> BUT that last one was the deeper and longest dive
> i ever made, and this time I had no reference with
> previous dives.
>
> With 10/100 i think the 36 to 9 mtrs stops was a
> bit too much aggressive and the oxy stops instead
> was right (almost 80 minutes). I was feeling right
> and strong till the end of the dive, so i decided
> that i was ok and went out of water. Little pains
> and head swinging begun 10 minutes later and
> persisted till the night. _I think that this was
> really near the limit, so next time i'll go back
> to 10/90 and plan longer dives!! grinning smileygrinning smiley
>
> Anyway, here is some photo shots of the dive,
> excellent visibility, more than 40 mtrs at the
> bottom!
>
> [url=https://www.facebook.com/ciro.osimo/media_set
> ?set=a.10201649879078251.1073741828.1517378023&typ
> e=1]Gorgona island deep wreck exploration -136
> mtrs[/url]
>
> Cheers, Ciro.

The longer and deeper I go greater margin I select.... few minutes longer in the water wont harm me at all... I wouln´t plan that dive with less than a 15/80... Thats a personal choice and nothing to do with the OSTC, but still

Options: ReplyQuote
New 2.70 firmware
Posted by: crisostcn2 ()
Date: September 24, 2013 03:20PM

hi to all and sorry for my english
i have two little problem after update firmware 2.70 in italian:

1 - i have 1 2N and in simulation the first deco stop is partially covered by text, i cannot see the deep of the stop

2 - i also have 2 2C and in simulation you cannot set more the 9 minutes of bottom time (the display alway show 9 minutes even if you press the plus button). second problem is like the 2N, the first deco stop is covered by text

is there any solution?

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: heinrichsweikamp ()
Date: September 24, 2013 06:18PM

Too long words in the Italian translation. We'll change that...

regards,
Matthias

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: graham1272 ()
Date: December 04, 2013 09:54AM

Hi,

woher kann man das source code von V2.70 stable download?
Vielen Dank!

Graham

Options: ReplyQuote
Re: New 2.70 firmware
Posted by: heinrichsweikamp ()
Date: December 04, 2013 10:34AM

Pull the code here: [bitbucket.org] and update to Rev. 733.

Regards,
Matthias

Options: ReplyQuote
Pages: Previous12
Current Page: 2 of 2


Sorry, only registered users may post in this forum.
This forum powered by Phorum.