OSTC 4 :  heinrichs weikamp forum The fastest message board... ever.
 
hwOS4: New Firmware V1.3.0
Posted by: heinrichsweikamp ()
Date: May 16, 2017 11:15AM

ENGLISH below.

Hallo,

Heute haben wir die neue Firmware V 1.3.0 inklusive RTE 1.1.0 für den OSTC4 zum kostenlosen download freigeschaltet:

heinrichsweikamp.com

Folgende Änderungen und Neuerungen gibt es seit der vorherigen V 1.2.6:
NEU: Tiefenmesser / Gauge Modus
NEU: Apnoe Modus
NEU: Durschnittstiefe, Stoppuhr im BigFont Modus
NEU: Kompass Peilung wird über den Standby hinaus gespeichert
NEU: extra dunkler Höhlenmodus
NEU: erweiterte Tastereinstellungen und Reset auf Grundwerte über Bluetooth
ÄNDERUNG: Bluetooth bei System automatisch an im Oberflächenmodus
BUGFIX: Berechnung des Gasverbrauchs im Decoplanner
NEU: kleine Batteriespannungsanzeige im Oberflächenmodus


The new OSTC 4 firmware V 1.3.0 including RTE 1.1.0 is now available for free download:

heinrichsweikamp.com

Changes since Version 1.2.6 stable:
NEW: Gauge mode / Bottomtimer
NEW: Apnea mode
NEW: Average Depth and Stopwatch in BigFont Mode
NEW: Compass bearing is saved during standby
NEW: extra dark Cave mode
NEW: extended button control and factory reset option via bluetooth
CHANGE: bluetooth active on system start
BUGFIX: gas consumption calculation corrected
CHANGE: small battery voltage display shown in surface mode

Options: ReplyQuote
Re: hwOS4: New Firmware V1.3.0
Posted by: swissdiving ()
Date: May 16, 2017 07:02PM

Update installed, no problem so far. Like the cave extra dark mode. Dive planned next week.

Cheers,

Hansjoerg

--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424

RTFM

Options: ReplyQuote
Re: hwOS4: New Firmware V1.3.0
Posted by: tanomogi ()
Date: May 19, 2017 03:14AM

Bat volt, avg depth/timer on xtra big font really nice features. thanks!
Now BT always on, others penetrates OSTC4 remotely easily if my LCD on...eye rolling smiley

Anyway, still suffering with RTE part3 update.

I think same situation occurs someone in this forum.(I think deco related[RTE] configurations)
I share my configurations.
* English locale
* Customview red / metric&celcius
* Enabled extra big font
* VPM +2 / Open Circuit / ppO2 1.6, Deco 1.68

Checked/Prooved not affecting RTE update fails
-Gaslist(all enable or any mixtures)
-Customtext(default or any text)
-Simulator SAC settings
-Compass(if calibrated, bearing set or not)


If I reset/reboot RTE&Firmware several times(It reverted to GF), but it fails update RTE part.
-Only one way to succeed: Reset settings -> RTE/Firmware reboot several times -> leave it alone until LCD off -> leave it additional minutes -> On -> RTE update passed with DECO reset warning/firmware erasing process.

Options: ReplyQuote
Re: hwOS4: New Firmware V1.3.0
Date: May 19, 2017 09:24AM

Hi,

To update the RTE I have to do exactly the same...

Peter #82

Options: ReplyQuote
Re: hwOS4: New Firmware V1.3.0
Posted by: ebertalex ()
Date: June 25, 2017 10:32AM

Hi all,

How can I make use of the "extended button control via Bluetooth" feature?
Do I need a new version of the companion?

Cheers
Alex

Options: ReplyQuote
Re: hwOS4: New Firmware V1.3.0
Posted by: heinrichsweikamp ()
Date: June 25, 2017 11:28AM

ebertalex Wrote:
-------------------------------------------------------
> How can I make use of the "extended button control
> via Bluetooth" feature?
> Do I need a new version of the companion?

This can be set via the OSTC Tools: [ostctools.angermayr.net] but I'm not 100% sure if this is implemented already. It's more a firmware feature to reset any button settings in case they are not accessible via the menu.

Regards,
Matthias

Options: ReplyQuote
Re: hwOS4: New Firmware V1.3.0
Posted by: Claude ()
Date: December 08, 2017 09:46AM

Hi Christian,

Any News about the next stable Version ?

Regards

Claude

OSCT4 #398
OSTC2C #8058

Options: ReplyQuote
Re: hwOS4: New Firmware V1.3.0
Posted by: heinrichsweikamp ()
Date: December 08, 2017 11:53AM

Claude Wrote:
-------------------------------------------------------
> Hi Christian,
>
> Any News about the next stable Version ?


No. not yet, sorry. Will be posted here when there are news.

Regards,
Matthias

Options: ReplyQuote
Re: hwOS4: New Firmware V1.3.0
Posted by: swissdiving ()
Date: January 21, 2018 06:50PM

Hello HW

Are we going to get a new stable with new features. If I'm not mistaken the last one was May 2017. Not long till May 2018.

Cheers,

Hansjoerg

--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424

RTFM

Options: ReplyQuote
Re: hwOS4: New Firmware V1.3.0
Posted by: Ralph ()
Date: January 21, 2018 07:55PM

Hello Hansjoerg,

during the last month software development concentrated on the OSTC2 / plus / cR family with its new-features rich V2.9x generation to be released as stable soon. Meanwhile programming for the OSTC 2 TR (just released yesterday on the BOOT) was done, too. The OSTC 4 code is currently in refactoring. Once that is finished, pimping it with new features can proceed...

BR
Ralph

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.