OSTC Mk.2, 2N and 2C :  heinrichs weikamp forum The fastest message board... ever.
Legacy OSTC's 
OSTC Bungee Support from Innodive
Posted by: heinrichsweikamp ()
Date: July 01, 2009 02:39PM

Hello,

We're getting more and more inquiries about this OSTC bungee support from Innodive


Purchase this directly from Innodive please.

Innodive speaks, reads and writes fluent French and English.

Regards,
Matthias

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: Innodive ()
Date: November 09, 2009 10:49AM

Hello,

Cover for the new OSTC Mk.II is ready and perfectly fits the new design.

www.innodive.com


Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: Raimund ()
Date: February 14, 2010 01:03PM

Hello,

does anyone know where to get bungee support for OSTC Version 1? Innodive doesn't longer sell that.

Many regards,
Raimund

Hallo,

Weiss jemand, wo ich "Bungee Unerstützung" für den OSTC Version 1 herbekommen kann? Innodive verkauft dies nach eigenen Aussagen leider nicht mehr.

Danke & Gruß
Raimund

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: heinrichsweikamp ()
Date: February 14, 2010 05:41PM

Hallo Raimund,

Wir haben noch einen über, melde Dich mal bei uns direkt: info@heinrichsweikamp.com

Viele Grüsse,
Matthias

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: Robert ()
Date: February 23, 2010 06:07PM

Hallo Matthias,

habt ihr möglicherweise noch einen "Bungee Support" "über"? smiling smiley

Oder hat evtl. sonst jemand eine Idee des Displayschutzes für den OSTC Version1?
Habe es mit Folie probiert, aber die hält nicht wirklich.

Viele Grüsse
Robert

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: plauzer ()
Date: February 23, 2010 09:24PM

nimm d-c-fix folie von konrad hornschuch ag aus dem baumarkt, 5 laufende meter zum preis von 4-5 € sollten ein ganzes taucherleben reichen. liegt bei selbsklebenden dekor-folien im regal. beste grüße falk m.

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: Steve ()
Date: February 23, 2010 10:21PM

ich habe ein folie für PDA gebraucht und das geht seht gut

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: ewatsch ()
Date: February 24, 2010 10:59AM

Has anyone tested the bungee-cover for the Mk.II?

Is it worth buying?

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: Robert ()
Date: February 24, 2010 04:33PM

Danke für die Tipps,
d-c-fix werde ich wohl noch probieren, wusste gar nicht, das es die auch als "Klarsicht" gibt.
PDA/Handy-Folie(n) haben sich, wie gesagt, alle nach kurzer Zeit "verabschiedet"sad smiley

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: Larscousteau ()
Date: February 26, 2010 11:20PM

I have the bungee-cover for MK2 and i find it very very good

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: Gizmo ()
Date: February 27, 2010 01:28PM

ewatsch Wrote:
-------------------------------------------------------
> Has anyone tested the bungee-cover for the Mk.II?
>
> Is it worth buying?

Depends on how you define 'worth' 25€ (+ postage) is a lot for what it is, i bought it for a bit of protection rather than a way of mounting it, as IMO there is nothing wrong with the OE strap, it will offer some protection (mainly on the front corners so i am happy i bought it.
Would i buy another?... Im not sure, I also think that i have had one from a bad QC batch as the mounting holes (it mounts through the OE pins) were not 'drilled' all the way through, nothing a 2mm drill bit didn't sort, but not something i expect to have to do.
The fit however is perfect.








HTH

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: ewatsch ()
Date: March 01, 2010 09:30AM

Hi Gizmo,

thank you very much for the pictures!

I'm not sure whether to trust only one velcro tape with my precious Mk.II. So I thought about using the additional cover in order to have a 'better feeling' while hovering in the deep blue . . .

ewatsch

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: Innodive ()
Date: March 07, 2010 11:45AM

Larscousteau Wrote:
-------------------------------------------------------
I also think that i have had one from a bad QC batch as the mounting holes (it mounts through the OE pins) were not 'drilled' all the way through, nothing a 2mm drill bit didn't sort, but not something i expect to have to do.



Hello,

It's not a bad batch. The production technique may leave some powder in the very small holes. Just pass through with a thin screwdriver will remove this powder. Nervertheless, we will check all covers for this issue.

OSTC 1 covers will be available next week again.

Regards

Innodive

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: jb2cool ()
Date: May 22, 2018 11:34AM

I know it's pretty old now but does anyone know where i can get a new one of these mounts? I have cracked my current one.

Options: ReplyQuote
Re: OSTC Bungee Support from Innodive
Posted by: jb2cool ()
Date: September 26, 2018 02:42PM

Still looking for one of these cases to replace a broken one I have. Anyone know where I can get one?

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.