OSTC3, cR, sport and 2 :  heinrichs weikamp forum The fastest message board... ever.
OSTC's running hwOS 
OSTC3 - Info MOD & pO2 Max
Posted by: ClaudeDive ()
Date: April 11, 2014 10:54PM

Hi Matthias,
Would it be possible to add the info "MOD" of the gas used on display dive mode and simulation mode as in the example attached photo,
The information "MOD" could appear on all pages of these two modes "dive" and "Simulation"



Thanks for your answer,
Regards,

ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><



Edited 6 time(s). Last edit at 09/07/2014 09:47PM by ClaudeDive.

Attachments: OSTC3 - MOD.jpg (18.3 KB)  
Options: ReplyQuote
Re: OSTC3 - Info MOD
Posted by: heinrichsweikamp ()
Date: April 14, 2014 11:10AM

ClaudeDive Wrote:
-------------------------------------------------------
> Would it be possible to add the info "MOD" of the
> gas used on display dive mode and simulation mode
> as in the example attached photo,

As with most of your proposals, yes: Yes, this would be possible. But we don't start coding all your requests at once, sorry.

Regards,
Matthias

Options: ReplyQuote
Re: OSTC3 - Info MOD
Posted by: ClaudeDive ()
Date: April 14, 2014 12:17PM

Hi Matthias,
As for my other applications, I think simple to achieve including "Info Type of gas" - "MOD" - "Blue color for inactif aGF" and "Low Battery signal", I hoped an answer to the technical proposals for ameliorations for your customers and users of your OSTC3, possibly with a period of application and your priorities but that it could have been also a refusal with your justifications, but not an answer that is not one.
I thought the technical proposals for ameliorations was a main element and a vocation of your Forum, sorry.
Regards,

ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><



Edited 3 time(s). Last edit at 04/15/2014 12:58AM by ClaudeDive.

Options: ReplyQuote
Re: OSTC3 - Info MOD
Posted by: scubatinoo ()
Date: April 15, 2014 08:01AM

ClaudeDive Wrote:
-------------------------------------------------------
> Would it be possible to add the info "MOD" of the
> gas used on display dive mode and simulation mode
> as in the example attached photo,

Serious divers know the MOD's of the common gases, write
it on the tanks and stick to their diveplan. Sorry but i
see no need for this kind of information on the display.
It's usefull to doublecheck when you configure the gases.

regards,
scubatinoo

><((((º> OSTC 2N 3705 <º)))><

Options: ReplyQuote
Re: OSTC3 - Info MOD
Posted by: ClaudeDive ()
Date: April 15, 2014 11:45AM

Hi Scubatinoo,
Sorry but I see no more need to have informations " EAD / END " on the screen during diving
The Sérious divers know the gases MOD's in their tanks but would like also the safety recall of the MOD of these gases on the screen Elevated much more easy to read and useful than " EAD / END " during diving.
" MOD " also can help to doublecheck the gas used with the same display on the computer and on the tank,
This does not prevent you to doublecheck all your parameters when you configure your gases and also stick to your diveplan.
Regards,

ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><

Options: ReplyQuote
Re: OSTC3 - Info MOD
Posted by: Rob ()
Date: April 15, 2014 12:01PM

Hi Matthias,

heinrichsweikamp Wrote:
-------------------------------------------------------
> As with most of your proposals, yes: Yes, this
> would be possible.

So you ar going to save the max ppO2 for each gas in the gaslist?
If not, the mod is useless becausse the mod of a decogas belongs to another ppO2 than the mod of a bottom-gas.

Regards
Rob

Home: [www.angermayr.eu]
email: ostctools@angermayr.eu
Home of OSTC Tools: [ostctools.angermayr.eu]
HWOSConfig for Android: [play.google.com]

Options: ReplyQuote
Re: OSTC3 - Info MOD & pO2 Max
Posted by: ClaudeDive ()
Date: April 15, 2014 01:39PM

hi Matthias,
On screen display "Deco Mode", we could have two settings pO2 max:
A setting for "Bottom Gas" with pO2 = 1.4 for example,
A setting for "Deco gas" and "Travel Gas" with pO2 = 1.6 for example,
This would avoid having to adjust the pO2 for each gas,
The MOD will be calculate automatically with the selection "Gas Type": "Travel" - "Bottom" and "Deco".
Regards,

ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><



Edited 1 time(s). Last edit at 04/18/2014 03:45PM by ClaudeDive.

Options: ReplyQuote
Re: OSTC3 - Info MOD
Posted by: heinrichsweikamp ()
Date: April 17, 2014 10:00AM

I use 1.6bar for the bottom gas sometimes.

Regards,
Matthias

Options: ReplyQuote
Re: OSTC3 - Info MOD & pO2 Max
Posted by: ClaudeDive ()
Date: April 18, 2014 04:06PM

Hi Matthias,
No problem! as you know pO2 Max are adjustable from 1.2 to 1.6 bar.
You set so the value that suits you,
"MOD" above gas used is calculated on 1.6 bar like the value written on the bottle of gas.
Regards,



ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><



Edited 4 time(s). Last edit at 09/01/2014 10:42PM by ClaudeDive.

Attachments: OSTC3 - MOD & pO2 Max.jpg (25.9 KB)  
Options: ReplyQuote
Re: OSTC3 - Info MOD & pO2 Max
Posted by: ClaudeDive ()
Date: August 24, 2014 01:13AM

Hi Matthias,
Following a further request of this feature, ("PpO2 gaz bas max vs gaz de déco" > Ludo - August 21, 2014 18:00)
Matthias, it would be great to do,
Regards,

ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.