OSTC3, cR, sport and 2 :  heinrichs weikamp forum The fastest message board... ever.
OSTC's running hwOS 
New 1.44 beta firmware
Posted by: heinrichsweikamp ()
Date: July 18, 2014 10:24AM

Hi,

[www.heinrichsweikamp.com] has the new 1.44beta for the OSTC3.

NEW: Update warnings every second
NEW: Show "Stop" in front of Safety Stop
BUGFIX: Start dive mode simulator in correct depth
BUGFIX: Surface interval was not displayed correctly in some cases
NEW: Store tissue load, date and time, surface interval, desat. time and nofly time every hour and reload them after battery change
NEW: Show clock in Apnea mode, minor layout changes in Apnea mode
NEW: Simplify gas change

And some smaller bugfixes and changes.

Please give it a try and post some feedback here into this thread.

Regards,
Matthias

Edit: Continue here: [forum.heinrichsweikamp.com]



Edited 1 time(s). Last edit at 08/04/2014 11:33AM by heinrichsweikamp.

Options: ReplyQuote
Re: New 1.44 beta firmware
Posted by: Rougaille ()
Date: July 18, 2014 03:34PM

Hello Matthias,

I've found a small bug with this version.

Either in english or in french :

the "Set Name" function of OSTC Companion is replacing the 11th character by a "b" or "ß"

Example :
1234567890b 2345678
Tel 0033
0102030405

Thanks,

Rougaille.

Options: ReplyQuote
Re: New 1.44 beta firmware
Posted by: Rougaille ()
Date: July 18, 2014 03:44PM

Matthias,

Another question :

Since Beta 1.41 we have a new display "NEW: Ceiling display (GF_hi based) in divemode"
> I can see in Simulator "Ceiling" increasing from 0.0 > x.x

Can you please explain the meaning of this "Ceiling" value ?

Thanks,

Rougaille.

Options: ReplyQuote
Re: New 1.44 beta firmware
Posted by: heinrichsweikamp ()
Date: July 18, 2014 03:46PM

Rougaille Wrote:
> Can you please explain the meaning of this
> "Ceiling" value ?

It's the hard ceiling based on your GF_hi.

Cheers,
Matthias

Options: ReplyQuote
Re: New 1.44 beta firmware
Posted by: heinrichsweikamp ()
Date: July 18, 2014 05:54PM

Rougaille Wrote:
> the "Set Name" function of OSTC Companion is
> replacing the 11th character by a "b" or "ß"

I can confirm this, will be fixed in the stable, of course.

Regards,
Matthias

Options: ReplyQuote
Re: New 1.44 beta firmware
Posted by: hploch ()
Date: July 19, 2014 08:12PM

can't change minutes and day, month, year in 1.44 beta

Options: ReplyQuote
Re: New 1.44 beta firmware
Posted by: ClaudeDive ()
Date: July 20, 2014 01:05AM

Hi Matthias,
Already report this problem with with v1.41 on my OSTC3, it's impossible to update the date,
And also when I hold the button "Enter" pressed, to try for changed the date, It blocks the display of seconds, which blocks the watch,
Of course, when I release the "Enter" button, the clock continues to run, but the date has not changed!

If we consider "hard ceiling" as backup's info > (backup ceiling) or (GF_hi ceiling)
It would be nice to also have the info for decompression in progress "real ceiling" > (real ceiling) or (current ceiling) on same screen with display and colors clearly distinct,
Info "real ceiling" linked directly to "runtime", the ascent rate and actual decompression of the dive during all ascent,
Info "real ceiling" may allow to secure a control additional of these two parameters (ascent rate, deco stop)

Excellent the improvement for change of gas,

Regards,

ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><



Edited 1 time(s). Last edit at 07/20/2014 12:36PM by ClaudeDive.

Options: ReplyQuote


Sorry, you can't reply to this topic. It has been closed.
This forum powered by Phorum.