OSTC3, cR, sport and 2 :  heinrichs weikamp forum The fastest message board... ever.
OSTC's running hwOS 
Pages: Previous12
Current Page: 2 of 2
Re: hwOS Tech: 3.01 released
Posted by: Gizmo94 ()
Date: April 27, 2019 01:46PM

Yes, i'm using Bluetooth. My battery is 74% up.
Do you think is too low ?

I will try your suggestion after charging battery.

Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: Gizmo94 ()
Date: April 27, 2019 05:55PM

Hi,

After recharging the battery (Level 99% ; Voltage 4.1v).
The firmware upgrade to 3.01 is OK.

Thank you for your help !
Best regards

Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: Jluriv ()
Date: April 29, 2019 02:00AM

Hi Ralph
Sorry to ask but although I have been owning and using 2 OSTCs for approx 2 years I am quite new to the forum and to this whole open source process of software development/upgrade: do you work for HW or are you a independent user/developer?
You seem to know a lot...
Jean luc

Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: Ralph ()
Date: April 29, 2019 07:07PM

Hi Jean luc,

thank you for your questions. My state is "independent user/developer". I bought an OSTC cR about 2 years ago to hook it to my Inspi CCR. When i found out that the whole firmware is laid open, i started to get myself into the code, first for understanding what the OSTC is doing and then made up ideas on what could be done even better or more. With a little help from Matthias i was able to set up the compile chain on my computer and since then i do firmware development, first hand to have the coolest tech dive computer for my own use, but i also hand over all my updates to Matthias. Over the course of the time i turned over almost every line of the code, that's why i'm quite familiar with how the OSTC operates. By reading, understanding and improving the code i learned a lot on how to calculate deco schedules, but also - in mutual benefit - fed in my tech diving experiance, especially in the field of CCR functions. Doing so, over the course of the time it happens to get to know some internal details bejond the software layer, but there's actually not much needed to know about to do OSTC programming. I dive with my own code and do a lot of testing on it, but i don't give my code directly to others. Instead it goes to Matthias at HW, where it is independently tested, then put out as beta here in the Forum and finally finds its way to official release. In the moment, my personal OSTC is about 1/2 year of development ahead of the 3.01 :-)

cheers,
Ralph

Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: Jluriv ()
Date: April 30, 2019 02:11AM

Tks Ralph. Impressive and quite cool when one gets to dive with his own code winking smiley

One more question : how deep can you use the OSTCs? I used my ostc plus and ostc 2 to 110m. they are rated to 120m by HW I think? Other model can go deeper?
Cheers
Jean-Luc

Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: heinrichsweikamp ()
Date: April 30, 2019 09:00AM

Hi,

The "small" units (all current models) work up to 120m, the OSTC4 200m.

Regards,
Matthias

Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: Erik69 ()
Date: May 09, 2019 09:31AM

Hi Ralph & Matthias,

Reading the explainations of Ralph, I try to find the source code of the OSTC, and I could not find them.
Are they available somewhere?

What is the compile chain?

Thanks



Eric

OSTC 2 #10039 v3.01
Waiting for the Cave diver mode !

Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: heinrichsweikamp ()
Date: May 09, 2019 10:00AM

It's on [bitbucket.org]

Regards,
Matthias

Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: Spacefish ()
Date: May 14, 2019 10:22PM

Regarding the Dots at Deco Time, it looks like this:

Attachments: Screenshot from 2019-05-14 22-14-39.jpg (225.7 KB)  
Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: Holger ()
Date: May 20, 2019 06:56PM

Hello,
After update to hwOS Tech 3.01 my OSTC2 shows battery Level 131% ; Voltage 4.0v.
I have a version with inductive recharge of the battery.
Direct after the update everything looked good. Battery level was around 80% if I remember right.
Now, two weeks later (without charging) it shows 131%.

Any advice?

Best regards

Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: heinrichsweikamp ()
Date: May 20, 2019 06:59PM

Holger Wrote:
-------------------------------------------------------
> After update to hwOS Tech 3.01 my OSTC2 shows
> battery Level 131% ; Voltage 4.0v.
> I have a version with inductive recharge of the
> battery.
> Direct after the update everything looked good.
> Battery level was around 80% if I remember right.
> Now, two weeks later (without charging) it shows
> 131%.

Battery is not set to it's correct value "T2" (Most likely T0). Reset this from the Reset Menu -> Reset Battery.

Regards,
Matthias

Options: ReplyQuote
Re: hwOS Tech: 3.01 released
Posted by: Holger ()
Date: May 20, 2019 07:11PM

Wow.. That was fast.
Set it to T2 and it seems to be o.k. now.
Thank you!



Edited 1 time(s). Last edit at 05/20/2019 07:17PM by Holger.

Options: ReplyQuote
Pages: Previous12
Current Page: 2 of 2


Sorry, only registered users may post in this forum.
This forum powered by Phorum.