OSTC 4 :  heinrichs weikamp forum The fastest message board... ever.
 
hwOS4: New Firmware 1.5.1
Posted by: heinrichsweikamp ()
Date: October 14, 2019 12:08PM

ENGLISH below.

Hallo,

Die neue Firmware 1.5.1 ist nun veröffentlicht.

heinrichsweikamp.com

Anleitung zur Installation: [forum.heinrichsweikamp.com] (Je nach aktueller Version kann es nötig sein, das Update zweimal zu starten. Der OSTC4 gibt dazu nach dem Update nötigenfalls eine Meldung aus. Grund ist, dass möglicherweise auch sehr alte Teile der Firmware wie der Schriftsatz und der Bootloader aktualisiert werden.)

Wegen aktuell noch nicht ganz geklärten Problemen mit der iOS App OSTConf empfehlen wir, das Update mit dem OSTC Companion auf einem MAC oder Windows PC einzuspielen.

Wir empfehlen nach dem Update die Einstellungen durch zu gehen, da evtl. nicht alle Einstellungen von der alten Firmware übernommen werden können.

Folgende Änderungen und Neuerungen gibt es seit der V 1.4.7:

[1.5.1] with RTE 2.00
FIX: 1.5.0 could enter dive mode when ambient pressure reduced during flight

[1.5.0] with RTE 1.90
FIX: Optical port timeout fixed
FIX: firmware version in logbook data
FIX: battery information in logbook data
FIX: correct main version number logbook data
FIX: fix drawing of CCR bailout profile in internal logbook

[1.4.8] with RTE 1.80
FIX: Important stability updates
FIX: Language updates
FIX: Spurious spikes in recorded logbook
FIX: NDL was logged incorrectly

ENGLISH:

Hello,

The new firmware 1.5.1 is now public.

heinrichsweikamp.com

Manual on how to install: [forum.heinrichsweikamp.com]

(Depending on your current version it may be required to start the update twice. The OSTC4 will show you a message after the update if this is required. Reason is, that this update also may update some older parts of the firmware like the font table and the bootloader).

We recommend to check your settings after the update since not all settings may be copied into the new version.

Because of currently existing issues with the iOS App OSTConf we recommend to install the upgrade with the OSTC Companion on a MAC or Windows PC.

The following changes have been made since V 1.4.7:

[1.5.1] with RTE 2.00
FIX: 1.5.0 could enter dive mode when ambient pressure reduced during flight

[1.5.0] with RTE 1.90
FIX: Optical port timeout fixed
FIX: firmware version in logbook data
FIX: battery information in logbook data
FIX: correct main version number logbook data
FIX: fix drawing of CCR bailout profile in internal logbook

[1.4.8] with RTE 1.80
FIX: Important stability updates
FIX: Language updates
FIX: Spurious spikes in recorded logbook
FIX: NDL was logged incorrectly

Options: ReplyQuote
Re: hwOS4: New Firmware 1.5.1
Posted by: Claude ()
Date: October 18, 2019 06:23PM

Hi,

I tried to update but impossible.

my computer keeps going from "download mode enabled" mode to a stand-by mode.

Any suggestions ?

Regards

Claude

OSCT4 #398
OSCT4 #550
OSTC2C #8058

Options: ReplyQuote
Re: hwOS4: New Firmware 1.5.1
Posted by: Claude ()
Date: October 18, 2019 06:27PM

The companion indicates "block timeout" after "uploading part 1 : FW v1.05.01..."

Regards

Claude

OSCT4 #398
OSCT4 #550
OSTC2C #8058

Options: ReplyQuote
Re: hwOS4: New Firmware 1.5.1
Posted by: OceanDiver ()
Date: October 20, 2019 04:11PM

Exactly the same problem occured with my OSTCs 4 as Claude described.
Unable to update firmware from 1.5.0 to 1.5.1

Regards
Guido

OSTC4 #125
OSTC4 #478

Options: ReplyQuote
Re: hwOS4: New Firmware 1.5.1
Posted by: swissdiving ()
Date: October 20, 2019 04:21PM

Updated yesterday without a problem.

Cheers,

Hansjoerg

--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424

RTFM

Options: ReplyQuote
Re: hwOS4: New Firmware 1.5.1
Posted by: heinrichsweikamp ()
Date: October 21, 2019 12:55PM

Hi,

Updating how-to is here: [forum.heinrichsweikamp.com]

This manual is correct and the update from 1.5.0 to 1.5.1 will update Firmware and RTE (But no fonts/graphics).

regards,
Matthias

Options: ReplyQuote
Re: hwOS4: New Firmware 1.5.1
Posted by: Claude ()
Date: October 21, 2019 07:28PM

Done !

But with a Mac...

Thanks Matthias.

Regards

Claude

OSCT4 #398
OSCT4 #550
OSTC2C #8058

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.