forum.heinrichsweikamp.com

Hello TnT,

today after work I went back to my original McBook pro and investigated connectivity.
Although I was scanning and saving the connection details in the import from divecomputer dialog, subsurface was actually attempting download from the wrong TTY.
After manually trying all the TTYs in ...

Here it is ...

Thanks

Fabio

Hello TnT,
finally managed to dump the OSTC, for some reasons my other macbook is not initiating communications hence the unsupported operation and the failed creation of the dump file.

This new forum software does not allow me to attach a hex file or many other extensions included .txt
I renamed ...

[quote=TnT post_id=22054 time=1578466731 user_id=634]
@Goose_66: You shouldn't get an "unsupported operation" error. Can you try to download your dives again with the "enable libdivecomputer logfile" checkbox enabled? Afterwards, send the log file, so I can see what is going wrong.

@divemasterjaap ...

[quote=TnT post_id=22047 time=1578395133 user_id=634]
Both subsurface and macdive use libdivecomputer for downloading dives. So it's not unexpected you see the same problem in both applications. This particular issue has already been fixed in libdivecomputer, but the latest subsurface release (v4.9 ...

Thanks for your support, I will get one of those ...

Fabio

Also, since I am a registered user of Macdive (I was using it before subsurface), I did try with the latest version and It cannot download dives also.
My intention was to download in macdive and reinport in subsurface ... which failed.

Please address the issue.

Kind regards

Fabio

Hello, I also have a problem downloading dives. I am using subsurface on MAC and it is the latest version. Also on OSTC 2 I was on 3.05, now on 3.07 and this did not fix the issue.

two more things.
The link above to the referenced thread does not work ...
This new forum software does not clearly ...

https://www.scubadivermag.com/12-injured-explosion-dusseldorf-boat-show/
https://www.divers-guide.com/en/news/1951-twelve-wounded-boot-dusseldorf
https://www.scubaboard.com/community/threads/dive-computer-explodes-12-injured.573759/#post-8538368

The event has received quite a bit of coverage.
If I ...

Hello,
tonight I was getting the computer ready for a week trip and upon switch on I find that the menu displays contrast inverted.
Same as this post:
http://forum.heinrichsweikamp.com/read.php?6,17575

I was running 2.07 on an OSTC2. I have now upgraded to 2.13 and the issue resolved.
What is it ...

Thanks Mathias, I will give it a try tonight once I am back home.

Cheers

Fabio

Dear All (and especially Mathias!),

I have been diving my 2n for quite a while with great satisfaction and updated many times.

This time, updating from 3.03 to 3.13, after the red bootloader message came up, the screen switched off and the 2n does not turn on anymore.

Since I cannot turn it on I ...

Hi Nodekh,

I concur with Vortax, in the last 50 dives my OSTC accompanied me, only 5 were no deco (those I accompanied my son in his Open Water course training and a couple with him after he got his c-card).

Beside this, I believe you might be better off getting a decompression planning software ...

Hello everybody,

After almost 2 years diving a OSTC2 in OC, I am considering going CCR (pre owned inspiration no HUD) and one possible option to the petrel is installing cell splitter (narked@90) with fisher cable, go into HW standalone HUD and then with optical cable into OSTC3 for display and ...

Theoretically you should ascend at least 10 meters per minutes up to the offgas depth and no more than 10 meters per minute above that depth.
This is because up to that point all compartments are undersaturated and after at least on compartment is over saturation and starts offgassing.
Therefore you ...

Voting for the split .....
+1

Thanks for the hint,
I would never ever figured that one out by myself.
I just use the stopwatch as such and not as a average depth interval counter ....

Fabio

Hello Mathias,

When in dive mode saturday I could not find a way to reset stopwatch, I searched in simulator mode and I realized that when stopwatch is displayed a "ResetAvr" menu item appears, selecting it would reset the stop watch.

Suggest relabel it "ResetTmr" in next beta/release.
ResetAvr ...

After updating macdive, no problem with Fw 2.70 and macdive either

Merci Jean-François,

for everybody, the beta actually fixed my problem.
Just make sure you are running 2.2.3 (latest stable) which will update the database during install and then download the beta from:
http://www.mac-dive.com/downloads/MacDive_Beta.zip

Then I had to delete the dive and ...

I recently updated to 2.70 and I believe I ran into a bug (possibly serious and unsafe if also affects deco calculation but I do not think so).

I usually dive with a HW OSTC2 with me which is my primary and then a Suunto Vyper in gauge mode as backup and dive tables Computers are backup not primary ...

I recently updated to 2.70 and I believe I ran into a bug (possibly serious and unsafe if also affects deco calculation but I do not think so).

I usually dive with a HW OSTC2 with me which is my primary and then a Suunto Vyper in gauge mode as backup and dive tables Computers are backup not primary ...

I recently updated to 2.70 and I believe I ran into a bug (possibly serious and unsafe if also affects deco calculation but I do not think so).

I usually dive with a HW OSTC2 with me which is my primary and then a Suunto Vyper in gauge mode as backup and dive tables Computers are backup not primary ...

Hi there,

I have been doing some decotable diving and I brought the OSTC2n with me (bottom gas AIR: one dive 20'@40mt with EAN50 as deco and one dive 20'@47 and EAN50+OXY as DECO gas).
The dives had been planned with Vplanner and HLPlanner (both VPM) and I brought along the OSTC 2n with 2.61 Beta ...

Matthias,
thank you for addressing it so rapidly.

cheers

Fabio