forum.heinrichsweikamp.com

@Daktar!!!
As already said below on my post of Sep 09, 2022 11:24
Use disposable commercial batteries (therefore not rechargeable) 3.6v AA SAFT LS14500 - 2600mAh > around 3.23€ on the net in June 2022, these batteries are THE REFERENCE in terms of 3.6 volt Lithium batteries
With these batteries I do ...

Hi @Dakar & @Plongeur Bleu,
Put 3.6v non-rechargeable batteries with T1 setting,
with these batteries I do 50 dives of 1 hour with a setting of the brightness of the screen on Eco !!!

Sorry @swissdiving, Yes but too quickly...
Cheer

Hi Matthias,
With firmware v3.16 I could turn on my OSTC3 USB #2430 by pressing a single button, right or left, which never gave me the slightest problem,
With the v3.19 update I have to press the 2 buttons simultaneously to turn on my OSTC3 USB,
Is this a new procedure?
With v3.19 to turn on my ...

Hello,
It's true that in recreational diving you will certainly not use all the functions and parameters of the OSTC 4, but this will perhaps motivate you to move towards the world of technical dives,
Beyond pure need, indulging yourself with a beautiful product is an important factor of ...

Hello,
Also Trimix Instructor and diver in the Var where the sun shines as everyone knows,
The blue color of the deactivated throttle is for me perfect and easily identifiable even in direct sunlight even with my eyes not so young as that ...
Obviously you should not look at the OSTC with sunglasses ...

With pleasure Ralph,
Also seen the perfect translations,
there is just to translate in the simulator:
"G.Density" in French with "G.Densité"
Nice WE !

Hi Ralph,

With the last v3.10 of 2020.05.07, for the consumption calculations, I did the Air and Trimix tests,
it's perfect everything is ok, thanks for update,

Hi gr3yw0lf!

You just need a little patience, let Ralph work and wait for the v3.11 or other update ...! Have a good day ...

hi guys
I think I discovered a little miscalculation in the simulator and I hope only in the simulator (not tested in real dives by now) just by playing around and compairing the runtime of the OSTC with the new subsurface planing.


hi,

Check out
[url] https://forum.heinrichsweikamp.com ...

Hi Ralph,

The good news is that you fixed this bug quickly, THANK YOU,

For the "Ackn" ("acknowledge") function In French "Ok Vu" ("Ok bien Vu" or "Ok bien Noté") to acknowledge reicept the most recent warning in dive mode.

Ok in French for > "Redémarrage/Backup"

Ok in French For > "G.Densité ...

Hi Ralph,

In the v3.10 presentation you talk about a new function:
> New option to acknowledge the most recent warning in dive mode (Left press -> Ackn?)
I havn't seen it ! Can we see it on the simulator ?
To translate "Ackn" in French, what is the English term ?

In the simulator we have "G ...

Matthias, is it good in French with "hwos_tech_fw_3-09_FR.hex"?

Hi Matthias & Ralph,

As mentioned in a previous post:
I updated my OSTC3 v_3.09 Beta 4 without worry on the 1st try, thanks the Usb connection!
I also calibrated my compass which gives me the right cap without abnormal deviation,
I tested an AIR type dive (Depth 48 m - Time 18 min) and a TRIMIX ...

Hi Ralph
Thank you for your details,
Here are my suggestions and other French translation improvements: (> that means to replace with ...)
# "Menu Déco" = Perfect!
- "Dive Setup" > "Config. Plongée" ("Configuration plongée")
or "Config." can be replaced by "Régl." ("Réglages")
Ditto for the ...

Hi Matthias & Ralph,
First of all, congratulations on your work and the reorganization of the settings,
For the French translations some points to improve:
# "Deco menu"> "SAC Setup">
- "Swap on Empty:" in French may be: "Gaz Perdu:" or "Change B/O:" or your explanations to give a better translation ...

Well I still love the OSTC and its BT connectivity since it makes sure there is no interface that can cause a leakage. And I have had my share of flooded dive computers...
Cheers
Alex


Try 10 times to update, it's good if you're patient, with my Usb connection once is enough!
As for the flooding ...

I had that problem too. I had to reconnect (several times) and start the install again. Eventually it ran through. I am still convinced HW should never have switched to BT. USB is much more reliable.


Completely agree with this, or it would be perfect if HW gave the choice of connecting the TC ...

X(

Hi Ralph

"Paliers + Longs :" corresponds to the function> TCODE tExtendedStops

Kind regards

Yes, absolutely Didier!

I am color-blind and l'm not certainly the only OSTC user in this case

And for me with the old light blue color of diseabled gases it was impossible for me to tell the difference between light blue and white

With the current blue it's perfect !

Moreover I think that the ...

Thank you Didier,

I'm also in a very sunny region (Hyeres Islands)

For me the color of disabled gases is perfect and well differentiated from other colors

This color has been around for at least 2 years and I don't hope it to change

To increase the contrast of your screen it's very easy to turn ...

Tip Top !!! Thanks Matthias & Ralph For this big job ...

In French replace "v_3.05 release" by "V_3.05 stable"

Many Thanks

Hi Matthias & Ralph,

About the new option "Extended stop" it would be interesting, when the answer is "No" in the setting menu,

To be able to set this option to "yes" during the dive in the case of an abnormal activity during this dive which would be judged not compatible according to the diver ...

Hi Matthias,

As you want ...

But v_3.05 it's Ok !

Kind Regards