forum.heinrichsweikamp.com

Hallo, Die Funktion ist neu (Bedenke, dass wir Benutzer haben, die seit 2009 mit den ersten Versionen dieser Software tauchen) und wenn das Update auf einem Gerät installiert wurde, was diese Funktion noch nicht hatte, steht der Wert auf 0xFFFF (Was 65535 entspricht). Mit dem nächsten (Vollständigen) ...

Hi,

Contact us directly, please and we have a look. You can't tell anything definitive from the pictures and the forum is not the right place for repair enquiries. info@heinrichsweikamp.com and we will be happy to help you.

Greetings,
Matthias

Hi, Wir haben schon länger keine Beta Version veröffentlicht. In letzter Zeit haben wir aber einige Arbeit in ein leicht überarbeitetes Farbschema gesteckt und das kann jetzt mal getestet werden. 325_beta.png Das Dunkelblau im Oberflächenmenü wird jetzt nur noch für inaktive Gase benutzt, der Dekot ...

Hi,

The iOS App "OSTConf" from the Appstore will update your OSTC3 with Bluetooth and your current 1.93 just fine. Give it a try, please.

Regards,
Matthias

Hello, because you have already contacted us in parallel with the same questions by email, here is just a brief summary: - FTDI drivers are only needed for the really old USB-OSTC - Update via app. This is described in detail here https://forum.heinrichsweikamp.com/viewtopic.php?t=14509 (further ...

Hallo,

mache bei dem OSTC mal ein Reboot. Was zeigt er dann als Druck/Temperatur an?

OSTC haben keinen Wasserkontakt, der Drucksensor erkennt (Wenn er normal funktioniert) den Tauchmodus über den Druckanstieg.

Gruß,
Matthias

Hallo,
Das würden wir schon machen. Wir haben allerdings vor einiger Zeit mehrfach erfolglos versucht, dafür ein Datenblatt zu bekommen. Auch einen Preis habe ich bis jetzt noch nicht gesehen und vermute, dass diese noch nicht verkauft werden.

Gruß,
Matthias

We'll have the OSTC4 back on stock soon (A few weeks). As Thorsten wrote the OSTC4 controls everything here, so this is not an independent solution. Demand for simple LED HUD is not very big, we might build one that is compatible with the OSTC4 using this multiplexer board but don't wait for it if ...

Hi,

It would be very interesting for us to know which GF parameters you have set. Even if the last stop is technically always at 0m, the OSTC should then simply display the NDL time again...

Greetings,
Matthias

The cave mode can be enabled/disabled in the menu if you have the firmware with the cave mode compiled (#define _cave_mode enabled in the configuration.inc)

The operation of the cave mode is relatively complex and complicated. Due to the small user base, it is simply better for our support if this is not (currently) in the regular firmware. Here is the current manual, which also clearly shows the functions: Supplemental Manual for the Cave Mode Function ...

We have discontinued the OSTC sport 2 for the time being, unfortunately the components have become so expensive that it is currently not worthwhile for us to offer an OSTC for € 515. You won't be able to find one at dealers either, that's for sure. We still have a lot of housings, maybe we'll o ...

Contact info@heinrichsweikamp.com and we have this replaced quickly. Looks like a dead pressure sensor to me.

Hi,

Obviously a fault in the charger or (unlikely) in the OSTC 2. Did you contact our support already?

regards,
Matthias

Continue here: viewtopic.php?t=22542

Hello, ENGLISH: The new hwOS tech (for OSTC3, OSTC plus, OSTC+, cR, OSTC 2 and OSTC sport (mod. 19)) firmware 3.24 is now available for download: https://heinrichsweikamp.com/service/firmwares Using OSTC+ or OSTC cR with external O2-Monitoring? Make sure to install the firmware with "_cr_" in the ...

Continue here: viewtopic.php?t=22541

Hello, The new hwOS sport firmware 10.80 is now available for download: https://heinrichsweikamp.com/service/firmwares The following changes have been applied: [10.80] CHANGE: Add voltage-based battery meter for OSTC+/PLUS when inserting batteries with unknown SOC CHANGE: Compatibility for new ...

Hallo,

Was für ein OSTC2 ist das (genau)? Es gibt einige Verschiedene Generationen mittlerweile. Idealerweise poste mal den Hardware-String aus dem Informations-Menü?

Gruß,
Matthias

Hello, The software in the OSTC is deterministic, so it always shows the same output for the same input conditions. So something is not the same with both OSTCs. Same firmware? Are all settings really the same? If in doubt, reset both OSTCs via the reset menu (Reset CF, Gas & Deco) and try again ...

We'll update the website for the 10.78

It is unfortunate that the NoFly feature (which is too short!! or too long!!), is a recurring topic at our support inbox. A simple 24-hour countdown is a safe and understandable option that aligns with the recommendations of most training organizations. We will continue to offer this option with ...

Buttons need replacement at our place. It is a complicated and time-consuming repair and therefore costs 139,70€ (as of 07/2024). If the unit is still in good condition this might be worth the repair but considering the age of the unit (The last 2N were sold in 2013) an upgrade to a newer unit is t ...

This is the time in which the tissues are mathematically (and within reasonable limits) fully adapted to the ambient pressure again.

Hallo,

An der Tech-Freischaltung ändert das nichts. Du kannst also die aktuelle 3.22 TECH normal installieren (Per App oder per OSTC Companion).

Gruß,
Matthias