Search found 4337 matches

by heinrichsweikamp
Monday 10. June 2024, 20:12
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC Plus Saftey Stop wird nicht angezeigt
Replies: 4
Views: 1057

Re: OSTC Plus Saftey Stop wird nicht angezeigt

Dann mache mal einen Reset der Einstellungen aus dem Reset Menü. Es lassen sich die div. Schwellwerte der Sicherheitsstopp-Mimik per PC-Software oder App verstellen. Irgendwas wird nicht so eingestellt sein, wie es sein soll. Das der Sicherheitsstopp in der Software funktioniert, können wir garantie...
by heinrichsweikamp
Friday 7. June 2024, 16:35
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC Plus Saftey Stop wird nicht angezeigt
Replies: 4
Views: 1057

Re: OSTC Plus Saftey Stop wird nicht angezeigt

Der Sicherheitsstopp in hwOS (Der Firmware für alle "kleinen" OSTC) funktioniert folgendermaßen: - Der Tauchgang muss tiefer als 10m gewesen sein und länger als 1min gedauert haben - Beim Auftauchen darf in 10m Tiefe keine Deko-Verpflichtung vorhanden sein - Ein Countdown von 3min wird dan...
by heinrichsweikamp
Sunday 2. June 2024, 15:34
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OTSC Sport did not start with 3.7 volt rechargeable battery
Replies: 3
Views: 273

Re: OTSC Sport did not start with 3.7 volt rechargeable battery

I also think that the battery does not make contact. If a 1,5V battery works, a 3,6V battery will work, too. Anything between 0,9 and 4,2V is fine for the OSTC sport.

regards,
Matthias
by heinrichsweikamp
Friday 17. May 2024, 17:00
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Firmware update
Replies: 2
Views: 1435

Re: Firmware update

Wähle die hwos_sport_fw_10-78_DE.hex aus und drücke den "Pfeil hoch" -> Dann wird diese Version installiert.

Gruß,
Matthias
by heinrichsweikamp
Wednesday 8. May 2024, 16:08
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC Plus Bluetooth Pairing problem - Android
Replies: 18
Views: 11466

Re: OSTC Plus Bluetooth Pairing problem - Android

Hi, With older OSTC2, the Bluetooth reset from the FAQ is still valid. OSTC with the newer Bluetooth Chipset (approx since the year 2020), the Bluetooth Reset from the menu does the same as the Bluetooth-Reset procedure from the FAQ. Try both. But if Windows can connect to your OSTC nominally, it's ...
by heinrichsweikamp
Monday 29. April 2024, 12:45
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: hwOS TECH: New Firmware 3.22
Replies: 6
Views: 1690

hwOS TECH: New Firmware 3.22

Hello, ENGLISH: The new hwOS tech (for OSTC3, OSTC plus, OSTC+, cR, OSTC 2 and OSTC sport (mod. 19)) firmware 3.22 is now available for download: https://heinrichsweikamp.com/service/firmwares [3.22] MD5: 9a86e4c2452b55a4dc9a043fbfa1ca71 FIX: minor fix of 12h time update in dive mode NEW: Add charge...
by heinrichsweikamp
Tuesday 23. April 2024, 08:33
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: hwOS TECH: New Firmware 3.21
Replies: 8
Views: 64518

Re: hwOS TECH: New Firmware 3.21

Hi,

The 3.22 will be published in the next days.

Regards,
Matthias
by heinrichsweikamp
Monday 22. April 2024, 13:22
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Compass - bearing
Replies: 2
Views: 3615

Re: Compass - bearing

Hi,

The bearing is shown with this green marker in the dive mode. Red is the counter course (+180°)

The small numbers you mention is the stopwatch which replaces the temperature when the compass is shown.
tm-bearing.png
tm-bearing.png (8.45 KiB) Viewed 3576 times
The bearing is not shown as figures in the dive mode.

regards,
Matthias
by heinrichsweikamp
Tuesday 16. April 2024, 08:51
Forum: OSTC 4
Topic: Middle button does not work anymore
Replies: 3
Views: 2231

Re: Middle button does not work anymore

Hi,

The magnet reset in the OSTC 4 does the same as removing the battery and re-inserting it. This will not adjust the buttons.

We're in contact with Christoph already and will take care of this.

Matthias
by heinrichsweikamp
Tuesday 2. April 2024, 18:24
Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
Topic: OSTC 2N button doesn't work
Replies: 4
Views: 1967

Re: OSTC 2N button doesn't work

and we replaced the buttons in this OSTC 2N...
by heinrichsweikamp
Tuesday 2. April 2024, 18:21
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Feature request: safety stop depth adjustment
Replies: 1
Views: 4630

Re: Feature request: safety stop depth adjustment

Hi,

You can configure this with HWOS Config
hwos_config_pc.jpg
or Subsurface.

https://www.angermayr.eu/index.php/de/s ... ostc-tools

You posted this in the wrong forum, we'll move this thread now.

Regards,
Matthias
by heinrichsweikamp
Thursday 14. March 2024, 18:16
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: hwOS Sport: New Firmware 10.77
Replies: 0
Views: 9230

hwOS Sport: New Firmware 10.77

Hello, The new hwOS sport firmware 10.77 is now available for download: https://heinrichsweikamp.com/service/firmwares The following changes have been applied: [10.77] NEW: Descent counter for Apnoe mode NEW: Dedicated surface customview #11 for Desat-Time, No-Fly and CNS FIX: NDL was shown in norma...
by heinrichsweikamp
Tuesday 12. March 2024, 13:10
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Uhrzeit
Replies: 4
Views: 2637

Re: Uhrzeit

Hallo,

Noch einfacher geht leider nicht. Ohne Strom läuft die Uhr halt nicht weiter und der OSTC stellt auf die letzte volle Stunde vor dem Stromverlust zurück. So stimmt es immerhin einigermaßen, wenn Du es vergisst einzustellen.

Gruß,
Matthias
by heinrichsweikamp
Monday 11. March 2024, 17:22
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Uhrzeit
Replies: 4
Views: 2637

Re: Uhrzeit

Per Smartphone koppeln, dann ist Datum/Uhrzeit stellen ein Klick (iPhone: zwei Klicks).

Gruß,
Matthias
by heinrichsweikamp
Monday 26. February 2024, 16:31
Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
Topic: Cannot connect 2C and 2N to windows 11 laptop
Replies: 11
Views: 18535

Re: Cannot connect 2C and 2N to windows 11 laptop

The old Mk.2, 2N and 2C OSTC used USB-UART Chips from FTDI (And yes, we used genuine ones from reliable suppliers ;-) - These are still 100% supported from Windows 11 and FTDI provides updates for these regularly https://ftdichip.com/drivers/ Usually, Windows 11 will download these automatically whe...
by heinrichsweikamp
Wednesday 14. February 2024, 10:30
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: New registered user? Please read.
Replies: 0
Views: 10211

New registered user? Please read.

DEUTSCH: Aufgrund anhaltender, automatisierter SPAM Angriffe auf dieses Forum haben wir die Regelung zur Freischaltung neuer Benutzer geändert. Neue User müssen manuell freigeschaltet werden. Ihr habt Euch kürzlich registriert und könnt dennoch hier nicht posten? Bitte schreibt uns kurz an und nennt...
by heinrichsweikamp
Saturday 3. February 2024, 17:59
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Letzter TG
Replies: 2
Views: 2390

Re: Letzter TG

Hallo David, Die Daten für den "letzten TG" werden beim OSTC nicht aus dem Logbuch gelesen, sondern nach dem Tauchgang separat im RAM abgelegt. Ein "reboot", Firmware-Update oder Batteriewechsel setzen diese Werte ebenfalls zurück (Die Zeit "Letzter TG" startet neu, all...
by heinrichsweikamp
Saturday 3. February 2024, 14:39
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: V10.76 does not update
Replies: 1
Views: 2406

Re: V10.76 does not update

Hi,

maybe you can contact us directly with some more information? info@heinrichsweikamp.com - from here, this error description makes it hard to solve this quickly.

Regards,
Matthias
by heinrichsweikamp
Monday 15. January 2024, 18:52
Forum: OSTC 4
Topic: boot 2024
Replies: 0
Views: 14429

boot 2024

Ab dem 20. Januar läuft wieder die "boot" in Düsseldorf. Ihr findet uns am Stand A04 in der Halle 12 und wir freuen uns, dass sich wieder einige OSTC user (Und solche, die es werden wollen) einfinden werden :D
by heinrichsweikamp
Monday 15. January 2024, 18:05
Forum: OSTC 4
Topic: Backplate screw size
Replies: 3
Views: 17444

Re: Backplate screw size

Then it's M3x4.

And you have a really old OSTC 4 :-)

email us at info@heinrichsweikamp.com - we ship screws and O-Rings for free.

Regards,
Matthias
by heinrichsweikamp
Friday 12. January 2024, 16:15
Forum: OSTC 4
Topic: Backplate screw size
Replies: 3
Views: 17444

Re: Backplate screw size

4 screws M3x4 - for very old units it's 2 M3x4 and 2 M3x6

Regards,
Matthias
by heinrichsweikamp
Tuesday 2. January 2024, 08:47
Forum: OSTC 4
Topic: hwOS4: New Firmware 1.6.5 with RTE 3.20
Replies: 12
Views: 127430

Re: hwOS4: New Firmware 1.6.5 with RTE 3.20

Nice computer but this power supply is poorly solved. Computer charging lasts 40 hours. And now it turns out that you have to do it once a month. Hi, An empty OSTC4 takes about 5-6hours to recharge. This is checked with every OSTC4 we ship. There are some things you can check: - Power supply is cap...
by heinrichsweikamp
Sunday 3. December 2023, 13:08
Forum: OSTC 4
Topic: hwOS4: New Firmware 1.6.5 with RTE 3.20
Replies: 12
Views: 127430

Re: hwOS4: New Firmware 1.6.5 with RTE 3.20

There is no change in the current consumption with this update.

Regards,
Matthias