Search found 4347 matches

by heinrichsweikamp
Thursday 11. July 2024, 18:01
Forum: OSTC 4
Topic: No fly waiting time
Replies: 5
Views: 9791

Re: No fly waiting time

It is unfortunate that the NoFly feature (which is too short!! or too long!!), is a recurring topic at our support inbox. A simple 24-hour countdown is a safe and understandable option that aligns with the recommendations of most training organizations. We will continue to offer this option with OST...
by heinrichsweikamp
Thursday 11. July 2024, 09:40
Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
Topic: Buttons do not work when disconnected from USB
Replies: 1
Views: 1088

Re: Buttons do not work when disconnected from USB

Buttons need replacement at our place. It is a complicated and time-consuming repair and therefore costs 139,70€ (as of 07/2024). If the unit is still in good condition this might be worth the repair but considering the age of the unit (The last 2N were sold in 2013) an upgrade to a newer unit is th...
by heinrichsweikamp
Thursday 11. July 2024, 09:13
Forum: OSTC 4
Topic: No fly waiting time
Replies: 5
Views: 9791

Re: No fly waiting time

This is the time in which the tissues are mathematically (and within reasonable limits) fully adapted to the ambient pressure again.
by heinrichsweikamp
Friday 5. July 2024, 16:45
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC 2 startet endlos / Startlogo blinkt alle 15s
Replies: 4
Views: 1157

Re: OSTC 2 startet endlos / Startlogo blinkt alle 15s

Hallo,

An der Tech-Freischaltung ändert das nichts. Du kannst also die aktuelle 3.22 TECH normal installieren (Per App oder per OSTC Companion).

Gruß,
Matthias
by heinrichsweikamp
Thursday 4. July 2024, 15:26
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC 2 startet endlos / Startlogo blinkt alle 15s
Replies: 4
Views: 1157

Re: OSTC 2 startet endlos / Startlogo blinkt alle 15s

Lade den Sport Helper: https://www.heinrichsweikamp.net/downloads/sport_helper.zip 1. Wenn das "play"-Symbol zu sehen ist, drücke wiederholt und kräftig mal auf die rechte Taste -> Das Bluetooth Icon erscheint 2. "Paare" den OSTC Sport mit einem Windows PC (Das ist vermutlich ber...
by heinrichsweikamp
Thursday 4. July 2024, 10:53
Forum: OSTC 4
Topic: OSTC 4 Luftdruck Anzeige / Messung zu hoch
Replies: 2
Views: 521

Re: OSTC 4 Luftdruck Anzeige / Messung zu hoch

Die Drucksensoren sind für Messungen bis 30bar ausgelegt und nicht als Luftdruckmesser für meteorologische Anwendungen oder als Höhenmesser. 33hPa Abweichungen sind nicht viel. Für die Tiefenmessung wird das ohnehin als Nullpunkt genommen, so dass hier eine nahezu cm-genaue Tiefenmessung erfolgt. De...
by heinrichsweikamp
Monday 24. June 2024, 10:55
Forum: OSTC 4
Topic: OSTC4 not calculating Deco correctly. Possible Bug?
Replies: 5
Views: 705

Re: OSTC4 not calculating Deco correctly. Possible Bug?

Thanks for the detailed report, we'll have a look into this. There will be some improvements in the next releases with the VPM (The time for 9m is entered in the time for 6m and then overwritten for the list display) the total ascent time is correct, also the shown "next stop". A bug, yes:...
by heinrichsweikamp
Thursday 20. June 2024, 08:45
Forum: OSTC 4
Topic: OSTC4 Vs Shearwater Perdix 2 Real world diferences
Replies: 10
Views: 1030

Re: OSTC4 Vs Shearwater Perdix 2 Real world diferences

There was no obligation at 3m as I had both configured to do a last deco stop at 6m, at 46:20 I had 7min deco and 9 min deco respectively I was breathing Nx22 (I know, there was no O2 in my filling station and refilled with air) I'd make the last stop at 3m if you are not using oxygen, you get bett...
by heinrichsweikamp
Tuesday 18. June 2024, 14:53
Forum: OSTC 4
Topic: OSTC4 Vs Shearwater Perdix 2 Real world diferences
Replies: 10
Views: 1030

Re: OSTC4 Vs Shearwater Perdix 2 Real world diferences

Hi,

We also use ZH-L16C. What was the deco requirement on 3m and the total deco time for this dive? What gases did you use?

You can find the used a and b constants for N2 and He here: https://code.heinrichsweikamp.com/publi ... rc/decom.c

Regards,
Matthias
by heinrichsweikamp
Monday 10. June 2024, 20:12
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC Plus Saftey Stop wird nicht angezeigt
Replies: 4
Views: 1724

Re: OSTC Plus Saftey Stop wird nicht angezeigt

Dann mache mal einen Reset der Einstellungen aus dem Reset Menü. Es lassen sich die div. Schwellwerte der Sicherheitsstopp-Mimik per PC-Software oder App verstellen. Irgendwas wird nicht so eingestellt sein, wie es sein soll. Das der Sicherheitsstopp in der Software funktioniert, können wir garantie...
by heinrichsweikamp
Friday 7. June 2024, 16:35
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC Plus Saftey Stop wird nicht angezeigt
Replies: 4
Views: 1724

Re: OSTC Plus Saftey Stop wird nicht angezeigt

Der Sicherheitsstopp in hwOS (Der Firmware für alle "kleinen" OSTC) funktioniert folgendermaßen: - Der Tauchgang muss tiefer als 10m gewesen sein und länger als 1min gedauert haben - Beim Auftauchen darf in 10m Tiefe keine Deko-Verpflichtung vorhanden sein - Ein Countdown von 3min wird dan...
by heinrichsweikamp
Sunday 2. June 2024, 15:34
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OTSC Sport did not start with 3.7 volt rechargeable battery
Replies: 3
Views: 1400

Re: OTSC Sport did not start with 3.7 volt rechargeable battery

I also think that the battery does not make contact. If a 1,5V battery works, a 3,6V battery will work, too. Anything between 0,9 and 4,2V is fine for the OSTC sport.

regards,
Matthias
by heinrichsweikamp
Friday 17. May 2024, 17:00
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Firmware update
Replies: 2
Views: 3789

Re: Firmware update

Wähle die hwos_sport_fw_10-78_DE.hex aus und drücke den "Pfeil hoch" -> Dann wird diese Version installiert.

Gruß,
Matthias
by heinrichsweikamp
Wednesday 8. May 2024, 16:08
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC Plus Bluetooth Pairing problem - Android
Replies: 18
Views: 15216

Re: OSTC Plus Bluetooth Pairing problem - Android

Hi, With older OSTC2, the Bluetooth reset from the FAQ is still valid. OSTC with the newer Bluetooth Chipset (approx since the year 2020), the Bluetooth Reset from the menu does the same as the Bluetooth-Reset procedure from the FAQ. Try both. But if Windows can connect to your OSTC nominally, it's ...
by heinrichsweikamp
Monday 29. April 2024, 12:45
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: hwOS TECH: New Firmware 3.22
Replies: 6
Views: 3487

hwOS TECH: New Firmware 3.22

Hello, ENGLISH: The new hwOS tech (for OSTC3, OSTC plus, OSTC+, cR, OSTC 2 and OSTC sport (mod. 19)) firmware 3.22 is now available for download: https://heinrichsweikamp.com/service/firmwares [3.22] MD5: 9a86e4c2452b55a4dc9a043fbfa1ca71 FIX: minor fix of 12h time update in dive mode NEW: Add charge...
by heinrichsweikamp
Tuesday 23. April 2024, 08:33
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: hwOS TECH: New Firmware 3.21
Replies: 8
Views: 66614

Re: hwOS TECH: New Firmware 3.21

Hi,

The 3.22 will be published in the next days.

Regards,
Matthias
by heinrichsweikamp
Monday 22. April 2024, 13:22
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Compass - bearing
Replies: 2
Views: 6394

Re: Compass - bearing

Hi,

The bearing is shown with this green marker in the dive mode. Red is the counter course (+180°)

The small numbers you mention is the stopwatch which replaces the temperature when the compass is shown.
tm-bearing.png
tm-bearing.png (8.45 KiB) Viewed 6355 times
The bearing is not shown as figures in the dive mode.

regards,
Matthias
by heinrichsweikamp
Tuesday 16. April 2024, 08:51
Forum: OSTC 4
Topic: Middle button does not work anymore
Replies: 3
Views: 3448

Re: Middle button does not work anymore

Hi,

The magnet reset in the OSTC 4 does the same as removing the battery and re-inserting it. This will not adjust the buttons.

We're in contact with Christoph already and will take care of this.

Matthias
by heinrichsweikamp
Tuesday 2. April 2024, 18:24
Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
Topic: OSTC 2N button doesn't work
Replies: 4
Views: 3045

Re: OSTC 2N button doesn't work

and we replaced the buttons in this OSTC 2N...
by heinrichsweikamp
Tuesday 2. April 2024, 18:21
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Feature request: safety stop depth adjustment
Replies: 1
Views: 6006

Re: Feature request: safety stop depth adjustment

Hi,

You can configure this with HWOS Config
hwos_config_pc.jpg
or Subsurface.

https://www.angermayr.eu/index.php/de/s ... ostc-tools

You posted this in the wrong forum, we'll move this thread now.

Regards,
Matthias
by heinrichsweikamp
Thursday 14. March 2024, 18:16
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: hwOS Sport: New Firmware 10.77
Replies: 0
Views: 12553

hwOS Sport: New Firmware 10.77

Hello, The new hwOS sport firmware 10.77 is now available for download: https://heinrichsweikamp.com/service/firmwares The following changes have been applied: [10.77] NEW: Descent counter for Apnoe mode NEW: Dedicated surface customview #11 for Desat-Time, No-Fly and CNS FIX: NDL was shown in norma...
by heinrichsweikamp
Tuesday 12. March 2024, 13:10
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Uhrzeit
Replies: 4
Views: 3754

Re: Uhrzeit

Hallo,

Noch einfacher geht leider nicht. Ohne Strom läuft die Uhr halt nicht weiter und der OSTC stellt auf die letzte volle Stunde vor dem Stromverlust zurück. So stimmt es immerhin einigermaßen, wenn Du es vergisst einzustellen.

Gruß,
Matthias