Search found 48 matches
- Monday 15. April 2024, 10:43
- Forum: OSTC 4
- Topic: Middle button does not work anymore
- Replies: 3
- Views: 1668
Re: Middle button does not work anymore
Hi, thanks for suggestion! I did do that, ostc 4 on the charging pad and charging, I placed a magnet on the screen, display switches off and right after on again, but middle button does still not work! Did I do all right? If yes, what can I do next so that the computer works again? Thanks very much ...
- Sunday 14. April 2024, 07:36
- Forum: OSTC 4
- Topic: Middle button does not work anymore
- Replies: 3
- Views: 1668
Middle button does not work anymore
Hello, because during the dives, the middle screen (in my case it's the overview), as well as the left defined display (in my case it's the temperature) suddenly start to switch automatically display by its own, I changed only the left button sensitivity to -10, the sensitivity of all buttons is 080...
- Saturday 7. October 2023, 08:15
- Forum: OSTC 4
- Topic: OSTC Tools for Windows - HWOS Config for Android
- Replies: 48
- Views: 634781
Re: OSTC Tools for Windows - HWOS Config for Android
Hi Rob,
i finally could test your solution,, WiFi off, autoconnect off and Mobile data off, but this does not work either, it stops at about 10 % :-(
I did test twice but no success.
Best regards
Christoph
i finally could test your solution,, WiFi off, autoconnect off and Mobile data off, but this does not work either, it stops at about 10 % :-(
I did test twice but no success.
Best regards
Christoph
- Tuesday 26. September 2023, 05:48
- Forum: OSTC 4
- Topic: hwOS4: Update auf 1.6.4 mit RTE 3.20 nicht möglich
- Replies: 4
- Views: 3989
Re: hwOS4: Update auf 1.6.4 mit RTE 3.20 nicht möglich
Hallo Thorsten, Bluetooth hat bei mir 5 Striche, der OSTC 4 liegt auch neben dem Smartphone, also daher sollte das i. O. sein. Die Einstellung OSTC 4 reduce uploadspeed ist an, also von dem kann es auch nicht kommen. Und letztlich habe ich die Akkueinstellung für HWOS Config auf unrestricted gestell...
- Tuesday 26. September 2023, 05:40
- Forum: OSTC 4
- Topic: OSTC Tools for Windows - HWOS Config for Android
- Replies: 48
- Views: 634781
Re: OSTC Tools for Windows - HWOS Config for Android
Hallo Rob,
leider funktioniert das auch nicht bei mir :-(
Ich habe die Akkueinstellung für HWOS Config auf unrestricted gestellt, es bricht bei mir aber nach wenigen % immer wieder ab.
leider funktioniert das auch nicht bei mir :-(
Ich habe die Akkueinstellung für HWOS Config auf unrestricted gestellt, es bricht bei mir aber nach wenigen % immer wieder ab.
- Monday 18. September 2023, 17:39
- Forum: OSTC 4
- Topic: hwOS4: Update auf 1.6.4 mit RTE 3.20 nicht möglich
- Replies: 4
- Views: 3989
hwOS4: Update auf 1.6.4 mit RTE 3.20 nicht möglich
Hallo, es scheint für mich nicht möglich zu sein ein Update von 1.6.2 auf 1.6.4 zu machen. Der Update-Prozess bricht mehr oder weniger nach einigen % ab, oft schon nach 2 %, das Maximum das ich hin bekommen habe waren 71 % mit dem HWOS Config auf dem Smartphone. Versucht habe ich es mit HWOS Config ...
- Sunday 17. September 2023, 16:15
- Forum: OSTC 4
- Topic: OSTC Tools for Windows - HWOS Config for Android
- Replies: 48
- Views: 634781
Re: OSTC Tools for Windows - HWOS Config for Android
Hallo Rob,
ich habe Dir eine E-Mail gesendet.
Grüße
Christoph
ich habe Dir eine E-Mail gesendet.
Grüße
Christoph
- Sunday 17. September 2023, 11:54
- Forum: OSTC 4
- Topic: OSTC Tools for Windows - HWOS Config for Android
- Replies: 48
- Views: 634781
Re: OSTC Tools for Windows - HWOS Config for Android
Hi, ich versuche ein Update von 1.6.2 auf 1.6.4 welches jedesmal abbricht bei ca. 20%. Ungefähr 10 x versucht aber ohne das es klappt. Das ganze mit Android HWOS. Ich versuchte es mit und ohne OSTC4 reduce upload speed. Könnte jemand bitte helfen und erklären was ich da eventuell falsch mache? Beste...
- Wednesday 21. June 2023, 05:46
- Forum: OSTC 4
- Topic: Deco information suddenly disappears during dive in CCR mode
- Replies: 5
- Views: 26005
Re: Deco information suddenly disappears during dive in CCR mode
Ok, have sent it.
Thanks for looking into this.
Regards
Christoph
Thanks for looking into this.
Regards
Christoph
- Tuesday 20. June 2023, 12:27
- Forum: OSTC 4
- Topic: Deco information suddenly disappears during dive in CCR mode
- Replies: 5
- Views: 26005
Re: Deco information suddenly disappears during dive in CCR mode
Ok, I downloaded the dive to subsurface, but as i don't know this application, neither use it, what to i need to do, Export the dive? In which format? Would it be Subsurface XML format?
Other infos you need:
- deco mode = VPM +3
- firmware = 1.6.2 with RTE 3.10
Other infos you need:
- deco mode = VPM +3
- firmware = 1.6.2 with RTE 3.10
- Tuesday 20. June 2023, 06:07
- Forum: OSTC 4
- Topic: Deco information suddenly disappears during dive in CCR mode
- Replies: 5
- Views: 26005
Deco information suddenly disappears during dive in CCR mode
First to let you know, that I do have the latest firmware installed. This problem did happen several times now, so I think there must be something wrong. I experienced the problem, that the deco information suddenly disappears during the the dive, OSTC 4 is in CCR mode. The OSTC 4 is used as the bac...
- Friday 26. February 2021, 06:17
- Forum: OSTC 4
- Topic: Air Integration
- Replies: 20
- Views: 44260
Re: Air Integration
Hello,
I join this, and would also like to see the OSTC4 with AI,would be really a great feature.
Regards
Christoph
I join this, and would also like to see the OSTC4 with AI,would be really a great feature.
Regards
Christoph
- Thursday 19. March 2020, 06:44
- Forum: OSTC 4
- Topic: noFly verschwindet im 30Sek Intervall
- Replies: 8
- Views: 12892
Re: noFly verschwindet im 30Sek Intervall
Ok, verstanden, danke für die Erklärung!
- Tuesday 25. February 2020, 06:24
- Forum: OSTC 4
- Topic: Small error/inconsistency decompression VPM
- Replies: 2
- Views: 5495
Re: Small error/inconsistency decompression VPM
Hi,
Ok, I will do that during this week, need to install subsurface before ;-)
Best regards
Christoph
Ok, I will do that during this week, need to install subsurface before ;-)
Best regards
Christoph
- Tuesday 18. February 2020, 06:48
- Forum: OSTC 4
- Topic: Small error/inconsistency decompression VPM
- Replies: 2
- Views: 5495
Small error/inconsistency decompression VPM
Hi, I have 1.5.2 RTE 2.02 installed and now during a decompression dive, using VPM, suddenly the decompression time and depth switches from say 5 min. at 3 meters down to 15 min. and 10 meters for a very short time and then goes back what seems to me normal. For this dive it happened twice. You can ...
- Monday 13. January 2020, 16:49
- Forum: OSTC 4
- Topic: OSTC4 suddenly doesn't funtion correctly anymore
- Replies: 5
- Views: 7453
Re: OSTC4 suddenly doesn't funtion correctly anymore
Hi,
I did put it on the charger and yes it behaves like you said, everything seems to be fine now, great, thanks very much for help.
So let's hope everything works fine next dive with this new 1.5.1
Best regards
Christoph
I did put it on the charger and yes it behaves like you said, everything seems to be fine now, great, thanks very much for help.
So let's hope everything works fine next dive with this new 1.5.1
Best regards
Christoph
- Monday 13. January 2020, 13:42
- Forum: OSTC 4
- Topic: OSTC4 suddenly doesn't funtion correctly anymore
- Replies: 5
- Views: 7453
Re: OSTC4 suddenly doesn't funtion correctly anymore
Hi, I finally succeded and was able to install after several go's the firmware 1.5.1 as well as the RTE 2.1 Nor the only problem I seem not to be able to solve is that the battery reads 4.06 V but the battery icon is red and the icon shows near empty. Even the maintenance restore battery charge seem...
- Monday 13. January 2020, 11:07
- Forum: OSTC 4
- Topic: OSTC4 suddenly doesn't funtion correctly anymore
- Replies: 5
- Views: 7453
Re: OSTC4 suddenly doesn't funtion correctly anymore
Hi, ah, ok, did not know, yes i have the beta 1.3.5 which was installed on the unit when i received it on the OSTC4. Now I try to install but I can not get the OSTC4 connected. In Windows I created a com port, windows named it COM5, but then when I connect, the companion says device did not respond....
- Monday 13. January 2020, 06:48
- Forum: OSTC 4
- Topic: OSTC4 suddenly doesn't funtion correctly anymore
- Replies: 5
- Views: 7453
OSTC4 suddenly doesn't funtion correctly anymore
Hi, my OSTC4 #516 suddenly doesn't function correctly anymore. When I started it, there was 00:00:00 for time and 00.00.00 for date. Then I tried to enter time and date again, time was ok, but date is only possible for 2017 and 2018, it is not possible to enter any other year. I tried then to transf...
Re: V1.3.5
@ swissdiving
I did have this also twice since heinrichsweikamp did install the 1.3.5beta on my OSTC4. Strange behaviour, but want be easy to track down, because it seems to happen only rarely.
Best regards
Christoph
I did have this also twice since heinrichsweikamp did install the 1.3.5beta on my OSTC4. Strange behaviour, but want be easy to track down, because it seems to happen only rarely.
Best regards
Christoph
- Friday 28. December 2018, 07:20
- Forum: OSTC 4
- Topic: OSTC cycles alone through menus
- Replies: 6
- Views: 6915
Re: OSTC cycles alone through menus
Hi, another feed-back about this self cycling trough menus of the OSTC 4. After another 10 dives since last post, this problem still occurs sometimes BUT at least does not change values in settings anymore, like it did before. It now enters the menu and then cycles through from one to another page b...
- Wednesday 14. November 2018, 06:56
- Forum: OSTC 4
- Topic: OSTC cycles alone through menus
- Replies: 6
- Views: 6915
Re: OSTC cycles alone through menus
Hi, just a feed-back about this issue. I did a full charge of the battery and after that it seemed that the OSTC did not cycle alone through menus anmore. But last week, after a dive, it did it again, but no changing of values, only through menus. Though I wasn't able to take a video of it. This see...
- Monday 22. October 2018, 18:47
- Forum: OSTC 4
- Topic: OSTC cycles alone through menus
- Replies: 6
- Views: 6915
Re: OSTC cycles alone through menus
Hi all,
I never let go lower with battery level then about a quater, so it was arround 25% but not much lower. When this happened, last Saturday right after the dive, the battery was 77% before dive.
I'll try to reproduce this behaviour and try to make a video, it's really strange!
I never let go lower with battery level then about a quater, so it was arround 25% but not much lower. When this happened, last Saturday right after the dive, the battery was 77% before dive.
I'll try to reproduce this behaviour and try to make a video, it's really strange!
- Monday 22. October 2018, 06:04
- Forum: OSTC 4
- Topic: OSTC cycles alone through menus
- Replies: 6
- Views: 6915
Re: OSTC cycles alone through menus
Hi Matthias, button sensivity is 75 except for left value which I had to change to -10, to 65 otherwise during dive values change. The plroblem is that when this automatic cycling through menus happens it changes values!!! Which means that e. g. the algorithm gets changes, the GF gets changed, etc. ...
- Friday 5. October 2018, 07:27
- Forum: OSTC 4
- Topic: OSTC cycles alone through menus
- Replies: 6
- Views: 6915
OSTC cycles alone through menus
Hi, my OSTC (#516) with 1.3.5 installed, cycles from alone through the menus. E. g. after a dive, suddenly, it switched on and started cycling from on menu to the next, even in a menu itself, then back to teh main menu options and so forth. I noticed this now 3 times,that's why I post this message, ...