Search found 32 matches

by Spacefish
Sunday 29. May 2022, 16:33
Forum: OSTC3, cR, sport and 2
Topic: OSTC 2: Battery 99% after Empty Battery (T4)
Replies: 2
Views: 1425

Re: OSTC 2: Battery 99% after Empty Battery (T4)

Ich weiß schon das es so ist und das man die Batterie trotzdem volladen kann / muss. Fände es nur cool, wenn die Firmware erstmal von einer leeren Batterie ausgehen würde und dann eher auf 99% / 100% springen würde, wenn 4,2V erreicht sind o.Ä. b.z.w. wenn halt kein Strom mehr fließt beim Laden (kei...
by Spacefish
Friday 20. May 2022, 11:24
Forum: OSTC3, cR, sport and 2
Topic: Problem while charging OSTC2
Replies: 5
Views: 2482

Re: Problem while charging OSTC2

can we have a "power puck" with an USB-C "socket" and USB-PD or a USB-PPS "trigger" electronic? most cellphones / laptops nowerdays come with USB-C Chargers (or you have to buy them seperatly).. Edit: https://www.mouser.de/ProductDetail/Wurth-Elektronik/760308101103?qs=...
by Spacefish
Friday 20. May 2022, 11:13
Forum: OSTC3, cR, sport and 2
Topic: OSTC 2: Battery 99% after Empty Battery (T4)
Replies: 2
Views: 1425

OSTC 2: Battery 99% after Empty Battery (T4)

Hello, i stored my OSTC 2 (built in battery) for a long time (> 12 month) and the battery ran flat (did not turn on). After putting it on a charger, it turned on via the bootloader (blue "play" button displayed). Afterwards it asked for the battery type. I selected "OSTC 2 / TR (T4)&q...
by Spacefish
Friday 16. October 2020, 19:08
Forum: OSTC3, cR, sport and 2
Topic: Gradient Factors
Replies: 20
Views: 22268

Re: Gradient Factors

How is the following case handled? Imagine GF Low: 10% GF High 100% (or any other non equal number where gflow < gfhigh) So my first deco stop should allow 10% super saturation of the leading tissue, the one in the middle 55% and on the surface 100%. This works out pretty well if i do a normal deco ...
by Spacefish
Friday 16. October 2020, 18:51
Forum: OSTC3, cR, sport and 2
Topic: TTS bei deaktivierten Dekogasen, Bug?
Replies: 23
Views: 17060

Re: TTS bei deaktivierten Dekogasen, Bug?

[quote=Ralph post_id=22921 time=1601888492 user_id=2006] d.h. der OSTC erkennt das O2-Gas nicht als ab 6m atembares Deko-Gas. Meistens passiert so etwas wenn die Wechseltiefe nicht richtig eingestellt ist. [/quote] Vermutlich in diesem Fall eher, weil er das Deko Gas als "deaktiviert" gese...
by Spacefish
Friday 16. October 2020, 18:42
Forum: OSTC3, cR, sport and 2
Topic: Begriffe in der nächsten Version
Replies: 3
Views: 3539

Re: Begriffe in der nächsten Version

[b]Swap on empty[/b]
A. Leerwechsel (A = Automatischer)
Autoleerwechsel (leider ein Zeichen mehr)
by Spacefish
Friday 16. October 2020, 18:23
Forum: OSTC3, cR, sport and 2
Topic: Bluetooth Device Name
Replies: 6
Views: 6339

Re: Bluetooth Device Name

[quote=D_Kl post_id=22165 time=1581862087 user_id=2074] Hallo Zusammen, auch ich habe schon seit längerem das gleiche Problem mit Subsurface-mobile (Iphone) und meinem OSTC2 mit roten Tasten. Offensichtlich liegt das aber an Subsurface selbst, da dieser Fehler in älteren Versionen nicht auftrat. Ich...
by Spacefish
Sunday 27. September 2020, 18:34
Forum: OSTC3, cR, sport and 2
Topic: New OSTC Companion 3.2.1
Replies: 11
Views: 26266

Re: New OSTC Companion 3.2.1

Warum gibt es eigentlich keinen Sourcecode mehr für den Companion 3.2.1?
Die letzte Version die ich noch habe war die 3.0.9 :(
by Spacefish
Thursday 23. July 2020, 20:47
Forum: OSTC3, cR, sport and 2
Topic: New OSTC Companion 3.2.1
Replies: 11
Views: 26266

Re: New OSTC Companion 3.2.1

Muss eh jedesmal erstmal
[code]sudo rfcomm bind /dev/rfcomm0 00:80:25:CC:9B:F4 2[/code]
eingeben.

benutze aktuell v3.00 9, habe es aber damals aus dem source gebaut...
Ist da in den neuen Versionen irgendwas deutlich besser geworden / sicherer?
by Spacefish
Sunday 16. February 2020, 11:53
Forum: OSTC3, cR, sport and 2
Topic: Bluetooth Device Name
Replies: 6
Views: 6339

Re: Bluetooth Device Name

Funktioniert leider nicht. Egal wie kräftig ich auf die Taste drücke/haue während das "(Play)" Symbol angezeigt wird kommt kein Bluetooth symbol oder ähnliches. Habe 3.07 drauf und es ist ein OSTC 2 mit roten Tasten der von Sport -> Tech geupdated wurde. Evtl. ein alter Bootloader? Serienn...
by Spacefish
Wednesday 22. January 2020, 02:10
Forum: OSTC3, cR, sport and 2
Topic: Bluetooth Device Name
Replies: 6
Views: 6339

Bluetooth Device Name

Hallo, mein OSTC 2 taucht seit einiger Zeit als Bluetooth Gerät mit dem Namen "BM+SR 9BF4" statt mit "OSTC 2" o.Ä. auf.. Ist nicht weiter Schlimm, geht auch so, aber bissel nervig bei Sub Surface auf dem Android Smartphone, da mann dann immer in den Einstellungen "unbekannte...
by Spacefish
Sunday 1. December 2019, 18:39
Forum: OSTC3, cR, sport and 2
Topic: hwOS Tech: Version 3.07 released
Replies: 14
Views: 11832

Re: hwOS Tech: Version 3.07 released

@Dirk,

die 150m kommen zustande, wenn der Druck-Sensor nicht gelesen werden kann / defekt ist..
Werden auch 99°C oder -99°C angezeigt?
by Spacefish
Tuesday 20. August 2019, 02:06
Forum: OSTC3, cR, sport and 2
Topic: Kompass OSTC2
Replies: 2
Views: 2002

Re: Kompass OSTC2

Cool,

danke für die Rückmeldung. Das mit den verschiedenen Chips habe ich im Assembler Code gesehen..

Ist vermutlich auch eine Frage des Stromverbrauchs u.s.w. muss man sicher eine gute Balance finden.
by Spacefish
Thursday 15. August 2019, 23:21
Forum: OSTC3, cR, sport and 2
Topic: OSCT 3 zeigt falsche Tiefe an
Replies: 2
Views: 1871

Re: OSCT 3 zeigt falsche Tiefe an

"Abtauchen im Flugzeug" auf das Problem muss man auch erstmal kommen :D
by Spacefish
Thursday 15. August 2019, 23:19
Forum: OSTC3, cR, sport and 2
Topic: OSTC 2 TR - Bugreport und Erfahrungsbericht
Replies: 17
Views: 9047

Re: OSTC 2 TR - Bugreport und Erfahrungsbericht

@Ralph encodiert ihr den Flaschendruck jetzt mal als "Delta" encode? Er ist ja prädestiniert dafür und noch hättet ihr die Chance.. Sprich z.B. immer nur 8bit signed Delta speichern was zum vorherigen Wert addiert wird, wenn es den Wertebereich sprengt 11111111 speichern was dann bedeutet,...
by Spacefish
Thursday 15. August 2019, 23:06
Forum: OSTC3, cR, sport and 2
Topic: Kompass OSTC2
Replies: 2
Views: 2002

Kompass OSTC2

Hallo, ich finde den Kompass am OSTC 2 fast unbenutzbar, bei mir springt der Kurs gut 30° hin und her und es ist schwer den sinvoll einzusetzen.. Ich habe mir das mal genauer angeschaut. Die "Noise" scheint ja vom Magnetometer und nicht von irgend einer Rechnung an der Auflösungsgrenze ode...
by Spacefish
Sunday 9. June 2019, 22:48
Forum: OSTC3, cR, sport and 2
Topic: hwOS Tech: 3.03 beta 1 released
Replies: 50
Views: 30582

Re: hwOS Tech: 3.03 beta 1 released

What information is expressed by the blue lines below the compartment saturation graph? Current desaturation speed? Or is this a bug?

[img]https://forum.heinrichsweikamp.com/file ... ressed.jpg[/img]
by Spacefish
Saturday 1. June 2019, 21:27
Forum: OSTC3, cR, sport and 2
Topic: OSTC II eingefroren
Replies: 2
Views: 1955

Re: OSTC II eingefroren

Der Akku hält "ewig" bei mir waren es fast 2,5 Tage o.O Vor- und Nachteil :D
by Spacefish
Tuesday 14. May 2019, 22:22
Forum: OSTC3, cR, sport and 2
Topic: hwOS Tech: 3.01 released
Replies: 41
Views: 23195

Re: hwOS Tech: 3.01 released

Regarding the Dots at Deco Time, it looks like this:
by Spacefish
Friday 30. November 2018, 13:32
Forum: OSTC3, cR, sport and 2
Topic: hwOS Tech: 2.99 beta 5 released!
Replies: 50
Views: 31976

Re: hwOS Tech: 2.99 beta 5 released!

I love the performance improvements in the rendering / the overall performance. I thing i don´t like: The different upper / lowercase variations in the menu (back is lowercase for example).. Would prefer matching cases and if "Back" is special, just draw a left arrow in front of it instead...
by Spacefish
Wednesday 30. May 2018, 19:15
Forum: OSTC3, cR, sport and 2
Topic: Tissue saturation graph wrong after upgrading to 2.97
Replies: 9
Views: 4448

Re: Tissue saturation graph wrong after upgrading to 2.97

i love the new way the bars are displayed, much more correct :)
the tracking of the ambient pressure always amazes me, after a long trip by plane (~750mbar during travel) you can see the "undersaturated" tissues for some hours :)
by Spacefish
Friday 27. April 2018, 09:38
Forum: OSTC3, cR, sport and 2
Topic: hwOS Header Doku falsch?
Replies: 4
Views: 2929

Re: hwOS Header Doku falsch?

Im Logbuch steht effektiv der 16 bit Wert der wie folgt berechnet wird: relative_pressure_in_mbar * 102 / (salinity_percent+100) und das ist das was im Logbuch aus ausgegeben wird als Meter Tiefe, es wird lediglich durch 100 geteilt / ein Komma zwei Stellen nach links geschoben. Der gespeicherte Wer...
by Spacefish
Wednesday 25. April 2018, 17:54
Forum: OSTC3, cR, sport and 2
Topic: hwOS Header Doku falsch?
Replies: 4
Views: 2929

hwOS Header Doku falsch?

Hallo, ich hab gestern angefangen eine kleine C# Library zu schreiben welche mit dem OSTC sprechen kann, dabei ist mir beim Parsen der langen Dive Header aufgefallen, Byte 17/18 (Max. Depth in mbar) mit der zugehörigen Note 1 die Note nicht ganz hinkommt. In Note 1 steht: [quote="Note 1"] ...
by Spacefish
Wednesday 1. November 2017, 22:48
Forum: OSTC3, cR, sport and 2
Topic: Dekostop Berechnung hängt hinterher?
Replies: 2
Views: 2578

Dekostop Berechnung hängt hinterher?

Hallo, habe heute zum Spaß mal den Simulator in meinem OSTC 2 sport (10.39 Firmware) laufen lassen. Dabei habe ich extrem konservative GF Werte eingestellt 21/45 um mal zu schauen wie hoch die Dekozeit maximal angezeigt wird. Habe dann im Simulator mit 5m angefangen und bin per -1m Menü auf 70m runt...
by Spacefish
Saturday 14. October 2017, 23:43
Forum: OSTC3, cR, sport and 2
Topic: Store compass heading longer?
Replies: 14
Views: 8322

Re: Store compass heading longer?

That´s what i noticed as well, i set a heading to be able to swim back to shore in advance and walked into the sea at night. The computer went into sleepmode before i got underwater and the heading was lost, so i had to reset it again. I would suggest 60 minutes as a value, this 60 minute timer is r...