forum.heinrichsweikamp.com

JeanDo, but this could be solved somehow.

However, I'm not familiar with this new flight mode (yet), but as this issues pops up from time to time it could also be solved by defining something like a maximun dive time (lets say 24hrs defined by CF78) to avoid these behavior (and data loss).

Matthias, is there a need to overwrite the log data if there is no change in the profile? Wouldn't it be possible to just save changes so you would save memory (and in this particular case a lot of dive logs)?

This thread is for describing my own feature requests for future development of the MK2/2N firmware. This is not an official list! Feel free to comment and discuss, propose new features or tell me that it is bullshit what I'm writing - I will try to keep it updated. Critical: Remove unit shutdown >1...

Yeah, the best would be to take another flight back to Thailand :-) I guess there is no chance to edit the altitude setting in dive mode and most likely the magnet trick is also not working (not sure about this). As this is a question popping up regularly you should be able to find a solution in one...

Thx for all the replies, but the question is still not answered. Matthias states "[...] and the OSTC shuts down". Will there be a warning before? What happens when ascending above -130m? Will it switch on again? Is there any decoplan left? Or will the unit break completely? I do not feel s...

May I push up my questions from the last post?

Stephen, do you have any practical experience concerning this topic now?

Ein ähnliches Thema haben wir auch beim Logbook Marker, das schaffe ich auch nicht mehr den zu setzen(was früher einfach einfach war)...

Die Idee mit links auch mehrere Punkte durchzuschalten finde ich gut, ist beim Shearwater übrigens genauso (der hat auch nur zwei Tasten).

On a "real dive" (tm) yesterday evening there has been correct deco calculations. Is this just an issue with the simulator?

Steve Wrote: > I also have a shearwater on my rEvo but mostly I > use MKII during dive because i'm used to it and > because of the clarity under water. There is just > a little difference between deco calculations. Steve, you know that there is quite an easy way to use the DR5 with the rEvo? I assum...

Steve Wrote: > Keep in mind that Gas 1 is your > diluent. Which makes the MKII awsome of course :p There is no need to use Gas 1 for diluent, for me it is Gas 4 right now. > If u use SP 0,7 or 1,3 during dive you will notice > the the deco doesn't make a big difference, just a > couple of minutes. Y...

Thx, the new scale on the logbook looks nice. For everybody else who wpnders how to find the additional information in den logsbook: press the left Button (SET/MENU) to toggle them. There is still no indicator if it is a CC or OC dive, so adding the used deco model would be _really_ nice. It would e...

dmainou Wrote: > Quick q. What about setting the set points is > there an order I should follow? Hm, seems that the 1st SP is the active one and you can change to the other ones in the water only. For me I set them to SP1 1,3, SP2 1,0, SP2 1,2 (the last one is the one 've been teached to use and I m...

dmainou Wrote: > Anyway, back on topic, over the past 12 months or > so I've read the manual of several units and to me > the one that looks the simplest to use and less > prone to f@ck ups is the unit you are flying (JJ > CCR). So be prepared to spend some money afterwards. You would be the first g...

Have Fun Mate! Which unit are you going to try? Keep in mind, that trying a CCR might become very expensive! I would recommend to have your eyes more on the unit itself or on the integrated controller and not on your MK2. Just set the MK2 to deco model CC GF (something like that, do not have my unit...

Steve Wrote: ------------------------------------------------------- > when diluent bottle is empty and you want to > switch to another botlle fe wich contains another > gas OK, but this is kind of an emergency and should not be a common case. I agree that it would be nice to have an easier way to h...

Lars, welchen praktischen Use Case für einen Diluent Gaswechsel hast Du denn? Warum brauchst Du das?

Ferdy Wrote: ------------------------------------------------------- > Grrrrr, ich hasse Flash... +1 Du bist auch nicht der erste der damit Probleme hat. Die HW Seite funktioniert auch mit nur HTML wenn Du kein Plugin installiert hast oder Du das Browserfenster kleiner 640 (?) Pixel Breite schiebst....

dmainou Wrote: > Hope it helps Not really, the OP described a problem the other way round - he could not fit the plug properly. Greasing has been suggested as a solution. For me there has never been a problem in fitting it in (but in removing which results in a bunch of deformed USB plugs laying aro...

Interesting Point Xavier, didn't recognize this before. I just checked the GF setting, which seems also to be limited to 255%. This might be a similar discussion as with the CNS and although I think there is no real need for a GF above 255% this might be tracked in the same context.

Export nach HTML, fertig!

HTH,
der Jan

Looks not soo bad JeanDo . Why not change the color of the depth line for gas change? Then you can also recognize it when there is no deco (at all/anymore) and which is common in jdivelog?

Concerning the +1: I also think this is quite an easy way for voting!

Thx,
Jan

The Bug is still present with jdivelog 2.15 and OSTC 1.83.

Rüdiger just stated again that there is something wrong. I think this topic is well known now and covered in the 1.83 Thread also, so we can stop discussing this in here...

Also showing the deco would be nice...

Thx,
Jan

I also have to confirm a bug still hanging around in the calculation of the no fly value. After 2-3 hrs out of the water now I still have 69:10. The profile looks good by the way (no decreasing surface like in 1.82), see it attached. I dived a TX 10/50 CC GF 30/90.

HTH,
Jan