Search found 69 matches
- Friday 13. October 2023, 03:34
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Firmware 3.20
- Replies: 5
- Views: 25849
Re: Firmware 3.20
Sorry for the late reply. By "off the rails" I mean it was showing me at 999m and a water temp of 999°C :o I returned it to HW and they replaced the sensor. It was working fine until the last dive. Battery fully charged Thursday evening for a 35 min dive, 40 min dive on Friday morning, the...
- Friday 14. October 2022, 21:25
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Firmware 3.20
- Replies: 5
- Views: 25849
Re: Firmware 3.20
Screen shot might not have worked on the original post. Trying again here.
- Friday 14. October 2022, 21:23
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Firmware 3.20
- Replies: 5
- Views: 25849
Firmware 3.20
Hello.
I upgraded to firmware 3.20 this afternoon on my OSTC plus as it was available through the config app. Went for 18m 45min dive this afternoon and the OSTC went a bit off the rails.
Screen shots attached
I upgraded to firmware 3.20 this afternoon on my OSTC plus as it was available through the config app. Went for 18m 45min dive this afternoon and the OSTC went a bit off the rails.
Screen shots attached
- Friday 31. August 2012, 11:19
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: New firmware 2.51beta
- Replies: 11
- Views: 9667
- Friday 15. June 2012, 15:06
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Seeking advise about display glass
- Replies: 18
- Views: 7552
Re: Seeking advise about display glass
Mine has got worse. The most noticable in my pic is along the top of the screen. The delamination is starting to meet in the middle.
I'm not overly worried about it but I've effectively logged the issue with HW so if it does get worse I'm not reporting it out of the blue.
I'm not overly worried about it but I've effectively logged the issue with HW so if it does get worse I'm not reporting it out of the blue.
- Thursday 14. June 2012, 18:35
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Seeking advise about display glass
- Replies: 18
- Views: 7552
Re: Seeking advise about display glass
I have the same issue with mine
[IMG]http://i197.photobucket.com/albums/aa14 ... /share.jpg[/IMG]
I contacted HW and they said if it got worse to let them know. I haven't done anything about it since.
[IMG]http://i197.photobucket.com/albums/aa14 ... /share.jpg[/IMG]
I contacted HW and they said if it got worse to let them know. I haven't done anything about it since.
- Tuesday 8. May 2012, 22:55
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: New 2.22beta available for the Mk.2/2N
- Replies: 9
- Views: 6871
Re: New 2.22beta available for the Mk.2/2N
New in 2.22:
BETA Version - Do NOT use for diving!
NEW: Custom Functions III menu (CF64-CF95)
BUGFIX: Missed deco stops issue
BUGFIX: Timeout for 2nd page of Gas Setup
BUGFIX: GasVolume checks for a gas-switch before the first stop
NEW: Battery statistics reset when battery is fully charged
BETA Version - Do NOT use for diving!
NEW: Custom Functions III menu (CF64-CF95)
BUGFIX: Missed deco stops issue
BUGFIX: Timeout for 2nd page of Gas Setup
BUGFIX: GasVolume checks for a gas-switch before the first stop
NEW: Battery statistics reset when battery is fully charged
- Tuesday 17. April 2012, 11:02
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: OSTC 2N Cover
- Replies: 9
- Views: 7006
Re: OSTC 2N Cover
I second helicopter (or bike) tape.
I also agree that the glass isn't "self-healing" and have the scratch (prior to helicopter tape) to prove it!
I also agree that the glass isn't "self-healing" and have the scratch (prior to helicopter tape) to prove it!
- Friday 13. April 2012, 17:58
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Error message in v2.20
- Replies: 2
- Views: 2703
Re: Error message in v2.20
Thanks Christian. Nothing serious then
- Thursday 12. April 2012, 12:23
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Error message in v2.20
- Replies: 2
- Views: 2703
Error message in v2.20
Hello. I was checking my OSTC before diving this afternoon, it wouldn't turn on so I connected it to my PC to charge it and got the following message [IMG]http://i197.photobucket.com/albums/aa140/regthing/share.jpg[/IMG] Once passed the message everything seems to be OK. Going to upgrade to v2.21 now.
- Sunday 25. March 2012, 17:24
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Feature request...
- Replies: 12
- Views: 7488
Re: Feature request...
Nice idea but not accessible when you need it most.
- Saturday 10. March 2012, 16:07
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Forgotten USB cap
- Replies: 31
- Views: 18612
Re: Forgotten USB cap
Steel wristband watch clasp. Usually at hand....
- Tuesday 14. February 2012, 15:04
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Three bugs(?) in Firmware 2.20 / Drei Käfer(?) in Firmware 220
- Replies: 42
- Views: 21249
Re: Three bugs(?) in Firmware 2.20 / Drei Käfer(?) in Firmware 220
There has already been a lot of discussion regarding prompts to switch gas and it was stated that HW policy is to ensure at least 3 button presses before a gas switch and that the OSTC isn't designed to make or prompt decisions. Flogging a dead horse I'm I'm afraid.
- Sunday 20. November 2011, 20:41
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Last Deco @6m, GF 30/80 and Air only
- Replies: 13
- Views: 14693
Re: Last Deco @6m, GF 30/80 and Air only
Hallgeir Wrote: ------------------------------------------------------- > What I think would be very useful, is to have an > automatical change of last stop depth from 6m to > 3m when no deco gas is chosen, or made > available... Plan the dive! It has been said many a time on here that the OSTC will...
- Thursday 3. November 2011, 20:21
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Ascent rate indicator
- Replies: 50
- Views: 24902
Re: Ascent rate indicator
heinrichsweikamp Wrote:
-------------------------------------------------------
> Hi,
>
> I don't want to move CFs but we don't reset CFs
> (if not required) anymore. You'll get a warning
> for changed default values instead.
>
> Cheers,
> Matthias
Ideal
-------------------------------------------------------
> Hi,
>
> I don't want to move CFs but we don't reset CFs
> (if not required) anymore. You'll get a warning
> for changed default values instead.
>
> Cheers,
> Matthias
Ideal
- Wednesday 2. November 2011, 09:51
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: start screen before diving
- Replies: 9
- Views: 4245
Re: start screen before diving
That's all available from the surface screen anyway (maybe not MOD)
- Wednesday 2. November 2011, 00:12
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Ascent rate indicator
- Replies: 50
- Views: 24902
Re: Ascent rate indicator
I too prefer the numerical display and would like to be able to turn off a graphic.
I can't see the advantage in reducing the refresh rate from 2 to 1.5 secs, what's going to happen in half a second that you need to know about half a second earlier? Seems to be change for the sake of change.
I can't see the advantage in reducing the refresh rate from 2 to 1.5 secs, what's going to happen in half a second that you need to know about half a second earlier? Seems to be change for the sake of change.
- Sunday 18. September 2011, 01:12
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: CF56 &CF57 Message
- Replies: 6
- Views: 4091
Re: CF56 &CF57 Message
Hi Steve. Broke it already?
- Saturday 10. September 2011, 00:00
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: A few ideas
- Replies: 13
- Views: 6974
Re: A few ideas
Good old fashioned space invadors! Left and right with autofire
- Wednesday 29. June 2011, 17:58
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Sofware iprovements
- Replies: 23
- Views: 10735
Re: Sofware iprovements
Paolo.
There is a sticky thread for updating the firmware here:
http://www.heinrichsweikamp.com/read.php?2,4071
There is a sticky thread for updating the firmware here:
http://www.heinrichsweikamp.com/read.php?2,4071
- Sunday 22. May 2011, 17:49
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: OSTC MK2 now it's the 2N
- Replies: 43
- Views: 25554
Re: OSTC MK2 now it's the 2N
OK. That's a fair point and I'm not looking for a bun fight. But as has been seen in this thread it is still seen as a negative. I love what you are doing with this product and I think we all feel part of it thanks to this forum and our ability to help shape the software development (or maybe it's j...
- Sunday 22. May 2011, 14:41
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: OSTC MK2 now it's the 2N
- Replies: 43
- Views: 25554
Re: OSTC MK2 now it's the 2N
Now you're talking my language! I'm actually a Design Engineer and design for manufacture is my bread and butter.. However I've not seen an N2 in the flesh and the only hint I have to the design is your quote above regarding removing an Aluminium plate to access the gel sealed battery. The plate app...
- Saturday 21. May 2011, 15:11
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: OSTC MK2 now it's the 2N
- Replies: 43
- Views: 25554
Re: OSTC MK2 now it's the 2N
heinrichsweikamp Wrote: ------------------------------------------------------- > We do not sell Mk.2 anymore, sorry. > > Regards, > Matthias Not really any of my business. But what were the drivers to move away from a user replaceable battery? Internet forums are full of recommendations for dive co...
- Saturday 21. May 2011, 11:19
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: 1.90 Stable released for the Mk.2/2N
- Replies: 48
- Views: 20942
Re: 1.90 Stable released for the Mk.2/2N
Kent Persson Wrote:
-------------------------------------------------------
> How do I change the Custom text (up to 23
> characters) in the main screen?
You need one of the after market log book software options. Divinglog 5.0 or JDivelog. I couldn't get JDivelog to work.
-------------------------------------------------------
> How do I change the Custom text (up to 23
> characters) in the main screen?
You need one of the after market log book software options. Divinglog 5.0 or JDivelog. I couldn't get JDivelog to work.
- Friday 20. May 2011, 23:55
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: 1.90 Stable released for the Mk.2/2N
- Replies: 48
- Views: 20942
Re: 1.90 Stable released for the Mk.2/2N
Kent, the first gas defaults to zero as you are breathing this from the surface. You won't be switching to your first gas at depth unless you're free diving first.