forum.heinrichsweikamp.com

Salut Rüdiger,

Wie hoch über Meer ward ihr?

Have you ever managed to switch it on? What happens when you plug it in at the PC with the USB cable? There should be a little red light flashing app. every second in the center at the bottom of the screen while the 2N is charging. [img]http://www.heinrichsweikamp.com/file.php?2,file=237,filename=IM...

@PeterK
That explains it. I must have been on 2.01

@Bardass
You got it.
You have to be one to recognize one

Whatever that is.

I can confirm that the time was reset when updating with Bootloader. Though I never got any warnings in relation to CF56,57,59 and CF60. I reset the CF's anyway.

Profiles are showing normal but haven't had the opportunity to dive since the upgrade.

@PeterK
RTFM is obvious. What about: PEBKAC

Hi all,

Just did the FW update. It really is a breeze if you RTFM.

Hallo alle,

Habe soeben die FW auf den neusten Stand gebracht. Einfacher gehts nicht so lange man der Anleitung folgt.

HW have removed the reference to the blinking LED's in the 2N manual. Here an excerpt from the MK2 manual. " Status Indicators There are LED status indicators to the left and to the right of the display. In Surface and Sleep Mode • Right indicator flashes red once per second: Battery is being c...

Same here!

Thanks heaps, also to Manfred.

Or tinoo is color blind or maybe his ostc never gets wet!
@tinoo
Only kidding!!!

Tinoo,
Nope, never turned on anything...
...all my 2Ns did/do it.

tinoo

At the bottom of the 2N screen, in the center between the S and the W

[img]http://www.heinrichsweikamp.com/file.ph ... all%29.JPG[/img]

pheeewww, took me quite a few shots with the camera to get light showing on the pic!!!!

The orange LED blinks on my 2N when charging ever half second or so. When I have Desat I get to blue LED flashing.

Alain I tend to agree with Solodiver. It might be practical to wait until the next stable release. Adjusting your computer to your age is one thing, thats only one small part. It depends very much also on your dive profile and the conditions for each individual dive (water temperature, phyisical act...

You need to have your 2N plugged in with the USB cable and then place the magnet at the center screw at the back of the 2N. Did you try to reboot the DC that way?

Can you choose OSTC in the driver pull down menu?
[img]http://www.heinrichsweikamp.com/file.ph ... lungen.jpg[/img]

If you can't choose these settings in jdivelog then I would suggest you reinstall jdivelog. I doubt very much its a com port problem.

I guess your best bet would be JeanDo and/or HW...

Hey, what about the frog!? It would be a perfect for an PADI recreational diver using air/EAN to 40 meters.

So tell us more about your housing...

Salut Lutz, Ein Firmware Upgrade führt dazu das die Custom Settings verloren gehen. Du musst sie also neu einrichten. Und ja wenn du den OSTC eingesteckt hast zeigt die battrie gelb an da sie ja geladen wird. Das gelb kann meines wissens nicht geändert werden, oder wenigstens weiss ich nicht welche ...

Hallo Kurt

Schau mal hier
Logbook capacity

Es kommt darauf an wie du die CF's ausgewählt hast und was du misst. Ich bin auf 47 gekommen, andere mit CCR auf 20 und wieder andere auf 74. Um so mehr messpunkte um so weniger tauchgänge werden gespeichert.

Hi JD, Air integration means that a pressure sensor with a transmitter is attached to the first stage. The 2N or frog would have a receiver which then displays the pressure on the display. The DC then becomes the pressure gauge. The DC could then also continuously calculate the remaining air (in min...

Richard, That depends on you. A large number of recreational divers use an air integrated dive computer. That means there is a sensor attached to the tank that measures the pressure and sends it to the diving computer, making your DC also the pressure gauge. There are as many opinions as there are d...

One thing to consider though
- No air integration

I'm with tinoo and reiner

@Matthias
Ich denke da hat kptn.nemo nicht ganz unrecht. Das Link zeigt zum OSTC beschrieb und nicht zur PC-Mac-Linuk SW Seite. Für uns alte Hasen kein Problem.

@kptn.nemo
Hast du den ftdi treiber bei dir auf dem PC / Mac installiert?
Ohne den geht nichts.

Would that not be the DR5 then?

No problem with my diving log. And I rather doubt that it has anything to do with the OSTC.

Have you tried downloading to a new DivingLog LOG?
Have you tried downloading with jDive Log?