forum.heinrichsweikamp.com

Hello,

Ci-jointe, la version française de la description des paramètres de configuration pour la version 2.70 de l'OSTC.

Bonne lecture,

Jean-Philippe

Hello,

Ci-jointe, la version française de la description des paramètres de configuration pour la version 2.59beta de l'OSTC.

Bonne lecture,

Jean-Philippe

Goose_66 Wrote: ------------------------------------------------------- > thanks, I did not notice: I am too much of a newbie of OSTC and I am not up to date with the betas. This patch is just 3 days old and your original post is certainly its origin B) And anyway, the 2.59 is not yet available for ...

Matthias has just pushed before the end of 2012 a patch in this sens :

Set CF17 (ppo2_warning_low) low level to 0.16bar

Before :
CF17 has to stay in [0.19b...0.21b] with 0.19b as default value

Now (2.59 beta) :
CF17 has to stay in [0.16b...0.21b] with 0.19b still the default value

Just my 2 cents ... The limit of 0.16b is also the minimum allowed by the French law if you want to dive in a French structure. Article A322-91 : La valeur de la pression partielle minimale d'oxygène inspiré par le plongeur est limitée à 160 hPa (0,16 bar). La valeur de la pression partielle maximal...

Or just merge CF65 and CF70 : CF70=0s is the same as CF65=False...

The decoding depends on the FW version but it could look like the here attached pdf.

But not sure that it really helps in the end ...

scubatinoo Wrote: ------------------------------------------------------- > Honestly - what do you know about the topics on > page 2 of this forum? Forums are good for asking, > but not for storing and finding informations... I agree that I never jump on page 2 but before asking a new question a do ...

I agree with your analyse on the backend but my vision is that the frontend does not only "connect" to the owner of the OSTC that has moved to the new FW. What about the connexion with : - other OSTC owners with old FW - 3rd party softwares - all documentations, forum and blogs that alread...

Before renaming all CF, a first step could be to just regroup them in dedicated menus. 1. Remove CF_I, CF_II and CF_III menus 2. Create new menus as proposed by Bardass for example 3. Spread the CFxx (without renaming) into the menus Honnestly, I don't care to jump from CF12 to CF32 when I browse pa...

Bardass Wrote: ------------------------------------------------------- > Hi Iglooz > 2 points : > > * i can't use Divinlog on the boat during > debriefing with my students ;) One point for you !! :)-D > * calculation in the Divinglog software is not > very accurate. I don't know wich formula is used...

Hello Bardas, I agree with you that the OSTC is a wonderful teaching tool especially when you are wedged by a never seen judo hold it is good to have a readable screen in your eye corner !! I'm also interrested by the ascentional speed for educationnal purposes but I find more interresting to get it...

As far as I can see, this stub is just used to simulate the accesses to CF54 ... CF58.
You can easily stub the code but you will loose the benefit of reusing a maintained p2_deco.c file which is also embedded like that in the OSTC.

Here is my today dive profile on the France in Annecy.
Difficulties with my new dry suit and not really proud of the profile, but if it can help ...

For info :
- beta 2.52 (changeset 632:41df16e18b2b)
- CF25 set to 6

As far as I have understood, this file is only requested in native context for eeprom simulation.

For my need, I'm using this stub ...

No rest for the brave !!
Indeed, it works better this way.

Thanks for the fast update

Rob, I would have like to test it tomorrow too but here is what I'm getting at start-up after uploading a 2.52 (changeset 631:19c2773a1657). Tissue already loaded even without dive (reseting the decodata/OSTC does not help either ...) Not really sure to dive with this version even with a spare compu...

Understood !!

Thanx for your help

Hello, I've been asked for clarifications on CF18 and CF46. Apparently the CF docs (at least English and French version) are not clear on the subject and need more explanations... My understanding : CF18 [0..1.6] has 3 effects : * during gas configuration CF18, is used to compute the MOD according g...

marcusdk Wrote: > As of now the GF factor only shown if it reaches a value above what you have set the OSTC in, is that correct. My understanding is that previously (and currently by default), the GF is only displayed if >CF08 AND not in NDL. With CF66, you can force the display of GF even in NDL bu...

Désolé pour le retard, pb de coordination pendant ces périodes estivales mais voilà, ca arrive ...

Ci-jointe, la version française de la description des paramètres de configuration pour la version 2.50 de l'OSTC.

Jean-Philippe

Bardass Wrote:
-------------------------------------------------------
> À few hours, ok, but how many hours ? 3 or 5
> hours ?
> And at what depth ? 5 or 6 meters ?

What about a new CF for the time before blackout and an other one for the warning color X( !!

Suggestion : unsigned 8 bits data = Max 255 ??
What you observe is just the rest of à div by 256....

No, only in the current development branch (aka future 2.51 beta).

fishwithlungs Wrote: ------------------------------------------------------- > In the surface mode are 4 pages,so that would make 5 presses necessary."diving" into menu takes Left(Menu) and 2x Right buttons.What would be the purpose of adding a page in standby that requires more pushes of ...