forum.heinrichsweikamp.com

Hello,

My 2N becomes very hard to switch sometimes (surface or dive) and sometimes buttons work well !

Always no solution for oldest ?

Mine is SN 4922.

Regards,
6RiL

Hi,

Have you the production year of S/N > 5500 ?

Thanks

Noone for CF 20 ?

6RiL

Hi,

My CF20 sampling rate is 5 seconds.
In diving mode, my 2N records each 5 seconds : it's Ok.
But in apnea mode, 2N records each 1 seconds : it's not ok !
Memory is too fast saturated !
I lost an important diving

How to made respected CF20 evenif in apnea mode ?

Thanks
6RiL

Thanks a lot Arno,
but this is not my way.

I would have preferred help in assembler !

By,

Hi,

When you have a constraint on the total run time to respect, yes, it becomes an important information : On long and deep dives, there is already enough to do to avoid additions with figures that change once or twice by minute.

So, I will try to code it.

6RiL

C'est ce que je craignais :-(

Mais une addition en assembleur tout de même... en gérant la bascule "no déco time" / DTR
'ASM c'est pas mon point fort.

On m'a dit que l''affichage du RT existe sur les "nouvelles" machines (ostc 2 New edition & co).

Est ce exact ?
Sait tu s'il serait possible de ...

Hi,

I want to display in dive mode the Total Run time (Dive Time + TTS).

Is this function/display already coded for OSTC 2N ?


Thanks.

6RiL

Oui c'est de la sout.
Je planifie avec OSTC Planner.
Par expérience je sais que le Galileo "fini" 1 ou 2 minute seulement après l'OSTC (configuré en GF Hi à 75%) avec des plafonds légèrement plus hauts. Sur des plongées de 120 à 160 min c'est pas mal. ça ne me pose donc aucun problème de conscience ...

Bonjour Laurent,

Le sujet principal est de savoir si c'est techniquement possible d'ajourter des gaz en fixe et si la mémoire est dimensionnée pour le supporter. Sur mon uwatec, je n'ai pas ce problème ( mais y'en a d'autres !) j'ai 10 gaz :)

Après concernat ma plongée et l'utilité des 7 gaz ...

Only 112m ::o
Yes, 7 differents actives gas, (8 with surface air Nx21 )
2 of them are near but theorically differents (12/61 and 13/57)
Even if i use only one gaz for this 2, i can't program my last deco +/- Nx82. So i need G6 for this Nx82, and my TTS is slightly not good until G6 switch near the ...

I have 7 (SEVEN) Gas evenif correct pre dive check

OK.
Or c) Not enough configurable gaz for dives with upon 7 gaz 8-)
Used G6 first time with 12/61 because config. mistake and second time with N82 because all gaz already used and actives.

Other option should be to have a "real" Gas 6 like Gas 1 to 5.
With Gas 7 like actual Gas 6 with ...

Is this complicate to change by code (take account deco gaz with G6) ?

Regards,
6RiL

I don't find how to adjust changing depth on 2N in OC mode for Gaz6.
So, zero or other, i can't know the value.
How to do ? during diving ? With CF ?

Thanks

Hello,

Sunday i used the gaz 6 with Tx12/61 because i missed my setup (my gaz 2 was 12/35 instead 12/61). At this time, my TTS increased abnormally, like all other gaz 1 to 5 was not active. I was surprised but not worry, my TTS on my SCUBAPRO-UWATEC was correct :-) After, when i switch on my gaz 3 ...

Of course, maybe I was not enough precise.

I want to reduce the number of items in the cyclic menu, like CF50 with bookmark.

6RiL

Hi,

Is It possible in future version to have CF75 in order to show/hide the new Ceiling parameter ?

6RiL

Hello,

Problem resolved with your p2_deco.o update (:D


thanks,
6RiL

>>Linker file missing?
>>p2_deco.o loaded?

Attached to the projet, I have 3 files :
18f4685_ostc_mkII.lkr
p2_deco.o
MAIN.ASM

Is there a checksum or a CRC that I can compare with original version .HEX ?

My build succeeded :

------------------------
Release build of project `C:\Users\6RiL ...

Hi,

I loaded the source code 3.03 version on Bitbucket.
Before to test my personal code, I build it with MPLAB IDE without changing anything in the code.
I load it on my OSTC.

I checked it with a little simulation and few thinks are wrong in my simulation.
The "no stop" time is always 0 and after ...

Like END is (MOD + 10)x(100-%He)/100 - 10,
is it correct for EAD : (MOD + 10)x(100-%He-%O2)/(100x0.79) - 10 ?

May it easier to code in ASM ?
It needs to substract %O2 in the ASM code above ?

6RiL

I saw it, but it's not an ASM version
If someone has the ASM equivalent for EAD ?

6RiL

Hi,

I want to print EAD instead of END in gas setup (OSTC 2N).
I found the code below for calculation of END ( menugassetup.asm L322). But i do not find the equivalent for EAD. Has some one got it ?

Thanks,
6RiL


------------------------------------------------------
; Show END in m
lfsr FSR2 ...

Hi,

I experiment a strange simulation with my 2N

this is my parameters :
G1 : Tx 23/25 @ 52m First Gaz
G2 : Tx 17/43 @ 84m
G3 : Nx35 @ 36m
G4 : Nx 62 @ 16m
G5 : Nx 82 @ 9m

L16-GF OC 50/80

Simulation start.
Switch to G3
Down to 35m
wait for the first deco stop
The no deco 0 min still remains ...