forum.heinrichsweikamp.com

I stand corrected. You are right, there is the possibility of calibration. I still don't see any value in adjusting temperature under water. To be able to do that a CF which allows an adjustment would have to be added. But as it is the calibration in an "controlled" environment above water...

What setting are you talking about?

The only setting in relation to temperature is CF21 and that has nothing to do with temperature calibration.

There is not temperature calibration value I would know of and neither is there a CF to adjust "temperature". With CF21 you can change the sampling rate, that's all. And even if there was, why would you want to change the temperature under water? As far as I know temperature is not include...

I have an Acer Iconia A500 and can attach all sorts of usb devices. I ll plug in the ostc to see what happens. Probably not much...

JD Two Points. 1. When updating with the update function in OSTC Planner it downloaded the latest update and started to install. During the installation I got the message that OSTC Planner was open and to continue it would have to be closed. --> Actually I just noticed that the Updater is now sepera...

ooopss scubatinoo was quicker. Thanks mate.

@jeff
In your case I think you need the hex file from bootloader V1.0 since you are running FW V1.8 and then after that you can go to the hex file of V2.01

Jeff

I've asked nakatome in the "com port in jdive log zuweisen" thread to help you. He's done a FW update on a mac in jdivelog...

nakatomi du hast mit dem Mac ein FW update gemacht, kannst du jkeep in diesem forum thread No connection between my OSX Lion & jdivlog behilflich sein. Er hat jdivelog im snowlepard zulaufen gebracht, mit verbindung zum ostc. Prinzipiell weiss ich wie man ein FW update macht aber nicht wie man b...

Hi Jeff, With Mac's and JDive log its very rarely got anything to do with cable. Though just recently we had a case where the USB cable was defective. Most of the time its a question drivers and Com Ports. Question 1: What do you mean with with "I tried it with MacDive..." were you able to...

Peter,

I suspect he is referring to this:
FW Upgrade 2.01

Salut Gorcio, I tend to agree with you. I also considered switching to GF Bühlmann for additional safety. From reading E. C. Baker I was not able to see clearly that the additional deep stops would be an advantage in the case of my dive profiles. Most of the time I dive air with a maximum depth of a...

wanna know about GF?
Read this:
A new slant on GF by K. Gurr

Of course there is a lot of other stuff to read. E. C. Baker is a good start.
Clearing up the confusion about deep stops by E. C. Baker

Have fun

Hallo Leute, Ich denke Hemmooriede hat nun genug gelitten! ;) Schade dass du den OSTC nur im Gauge Modus benützt aber das entscheidenden ist dass du ihn so benützt dass du zufrienden bist. Wenn du auf Firmware V2.0 bist musst du eigentlich kein FW Update machen. FW Update - Hier lesen ob update notw...

Ich denke wir werden auch dir helfen können. Aber der OSTC ist eben nicht ein TC den man einfach einstecken kann und dann läuft es mit minimalstem zutun des Anwenders. Nich nur bezüglich der DiveLog software sonder auch weil es regelmässig updates gibt. Wenn du das Potential des OSTC nützen willst s...

Nakatomi, Das problem ist hier wohl kaum die Software sondern der Anwender. Selbst mit der Treibersoftware auf CD oder DVD käme er nicht weiter. Hemmooriede weiss nicht wie man den Com Port in Jdive Log konfiguriert. @Hemmooriede Was ich sagen kann (und ich habe eine Windows JDive Log version) Setti...

Ich bin ziemlich sicher dass man dir hier helfen kann. Es gibt aber sonst noch ein jdive log forum.
JDiveLog Forum

Try this:
http://www.heinrichsweikamp.com/de/ostc_2n/pcmaclinux_software/

Look for Bootloader v1.0 its 6th. from the top.

JD

Paypal payment done.
----------------------

I had the problem when updating the OSTC Planner as well. I uninstalled and re-installed. Now its ok.

Peter,

You can configure up to 5 different gas mixes.
Preset for all gases is "Air" and unless you dive EAN or Trimix you won't need to change anything.

You may want to ask your question in your native language. Someone in the forum may be able to answer you in your native tongue.

Simon,

Hast du dir diesen Post angeschaut:
Corrupt logbook?

Dave,

I find it hard to believe that you cannot enter an exception in Norton Internet Security to download a file. Alternatively I am sure you can stop NIS download the SW and then start it again...

Dave give us some details!

Yo Jez,

Just need to turn on the 2N.
I was able to download the config and upload changes. So it does work.
(I am running it on XP)

Lukas, Wo in diesem Forum sagt HW dass die Treibersoftware bei dir falsch installiert wäre? ----------------------- Dass die batterie innerhalb weniger stunden leer ist, ist sehr unwahrscheinlich,ausser der 2N wurde dir mit leerer batterie duch HW ausgeliefert. Das wiederum kann ich mir nicht wirkli...

Dmainou Lukas had a problem with the USB cable and is now whinging that he gets lousy support from HW. The poor thing had to go out and buy another cable (and neglected to check that the connector would fit at the 2N connection). A sharp knife and a little bit of shaving off of the plastic solved th...