Hallo,
Die Reaktion auf das "extra" Gas ist in der Tat so wie gewollt. Du kannst konfigurierte Deko-Gase UW aktivieren und eben direkt auf ein Extra-Gas wechseln. Aber Du kannst keine Gase UW konfigurieren, die dann später im Verlauf des TG genutzt werden sollen.
Gruß,
Matthias
Search found 4330 matches
- Thursday 9. November 2023, 15:16
- Forum: OSTC3, cR, sport and 2
- Topic: Dekogas während der Simulation hinzufügen
- Replies: 6
- Views: 41790
- Monday 30. October 2023, 13:02
- Forum: OSTC3, cR, sport and 2
- Topic: Deko time at 6m countdown is much longer than shown
- Replies: 4
- Views: 29069
Re: Deko time at 6m countdown is much longer than shown
Then you need to disable the deco gas (You can do this during the dive, too). The OSTC assumed you would be changing to this gas (Which would have accelerated your deco). That resulted in the discrepancy you saw.
Regards,
Matthias
Regards,
Matthias
- Monday 30. October 2023, 12:27
- Forum: OSTC3, cR, sport and 2
- Topic: Deko time at 6m countdown is much longer than shown
- Replies: 4
- Views: 29069
Re: Deko time at 6m countdown is much longer than shown
Hello,
Can you post your Gaslist for this dive (As shown in the logbook)?
Regards,
Matthias
Can you post your Gaslist for this dive (As shown in the logbook)?
Regards,
Matthias
- Tuesday 24. October 2023, 13:42
- Forum: OSTC Mk.2, 2N and 2C
- Topic: USB OSTC users - please read!
- Replies: 0
- Views: 56555
USB OSTC users - please read!
Hi, We see corroded USB ports regularly because users continue to close the USB cap with a screwdriver all the way down. That might get the O-Ring damaged in the threads. Result is a leak and (worst case) end-of-life of the entire unit (The USB port is NOT replaceable in the 2C or 2N!). The USB cap ...
- Tuesday 24. October 2023, 11:14
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTN 2n Comms issues
- Replies: 6
- Views: 43524
Re: OSTN 2n Comms issues
That's an "OSTC 2C" (It's written on the front, as well). If the USB port is not detected, try a different cable and/or clean the USB port with some contact cleaner or "WD40". We see corroded USB ports regularly because people continue to close the USB cap with a screwdriver all ...
- Tuesday 24. October 2023, 11:02
- Forum: OSTC Mk.2, 2N and 2C
- Topic: New 3.15 firmware
- Replies: 11
- Views: 48056
Re: New 3.15 firmware
Continue here: viewtopic.php?t=22482
- Tuesday 24. October 2023, 11:02
- Forum: OSTC Mk.2, 2N and 2C
- Topic: New 3.16 Firmware
- Replies: 0
- Views: 56389
New 3.16 Firmware
Hello, Today, we released the 3.16 stable for the USB-OSTC2 Series (2N/Mk.2/2C). Changes since 3.00 (Changes since 3.13) : BUGFIX: Vertical speed display NEW: Allow to set date > 31.12.2020 BUGFIX: Small language fixes CHANGE: Debug mode disabled (Hard-coded) NEW: Logbook shows markers with small or...
- Wednesday 18. October 2023, 16:16
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTN 2n Comms issues
- Replies: 6
- Views: 43524
Re: OSTN 2n Comms issues
Hi,
Is this an OSTC 2N (With a USB port on the side)?
regards,
Matthias
Is this an OSTC 2N (With a USB port on the side)?
regards,
Matthias
- Monday 9. October 2023, 16:56
- Forum: OSTC3, cR, sport and 2
- Topic: Safety stop on OSTC 2 firmware 10.75
- Replies: 3
- Views: 21665
Re: Safety stop on OSTC 2 firmware 10.75
It was posted before, but the safety stop in hwOS (the firmware for all "small" OSTC) works as follows: - The dive must have been deeper than 10m and lasted longer than 1min. - When surfacing, there must be no deco commitment at 10m depth - A countdown of 3min is then displayed (to the sec...
- Monday 9. October 2023, 09:39
- Forum: OSTC3, cR, sport and 2
- Topic: Silicon sleeve
- Replies: 37
- Views: 161500
Re: Silicon sleeve
Thanks! Looks very nice.Acorchia wrote: ↑Sunday 8. October 2023, 21:25 If any one is interested I build a hard cover for OSTC 2 to print.
https://www.thingiverse.com/thing:6255991
Regards,
Matthias
- Tuesday 3. October 2023, 15:42
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC Sport - Unable to connect on Bluetooth for Firmware Upgrade
- Replies: 13
- Views: 54640
Re: OSTC Sport - Unable to connect on Bluetooth for Firmware Upgrade
In the new OSTC+, there is an option "Reset Bluetooth" in the reset menu. This will un-pair any devices from the OSTC+ and usually does the trick if you have issues. Also, the OSTC+ Bluetooth may not work with a (low quaility) 1,5V battery. The recommended 3,6V rechargeable LiIon battery o...
- Monday 25. September 2023, 10:54
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.5 with RTE 3.20
- Replies: 12
- Views: 74696
Re: hwOS4: New Firmware 1.6.5 with RTE 3.20
Hi,
We have updated this thread with the 1.6.5. This fixes the "Big Font" issue in the SYS2 menu.
Regards,
Matthias
We have updated this thread with the 1.6.5. This fixes the "Big Font" issue in the SYS2 menu.
Regards,
Matthias
- Wednesday 20. September 2023, 10:48
- Forum: OSTC3, cR, sport and 2
- Topic: Surface pressure compensation
- Replies: 6
- Views: 20413
Re: Surface pressure compensation
Hello,
The OSTC+ will use the surface pressure reading for the 0m reference. So, some hPa more or less will NOT affect your depth reading and this is not critical. A defective pressure sensor will show (intentionally) 9999hPa on the surface.
regards,
Matthias
The OSTC+ will use the surface pressure reading for the 0m reference. So, some hPa more or less will NOT affect your depth reading and this is not critical. A defective pressure sensor will show (intentionally) 9999hPa on the surface.
regards,
Matthias
- Wednesday 20. September 2023, 10:42
- Forum: OSTC3, cR, sport and 2
- Topic: Frage zur TTS
- Replies: 4
- Views: 17638
Re: Frage zur TTS
Hallo,
wenn das Dekogas als "Deco" konfiguriert ist UND eine Wechseltiefe eingestellt ist, wird es in die TTS einbezogen (Bis zu 5 Gase gleichzeitig). Zudem wird Dir dann auf der Wechseltiefe auch der Gaswechsel durch gelbes Blinken des aktiven Gases der Wechsel empfohlen.
Gruß,
Matthias
wenn das Dekogas als "Deco" konfiguriert ist UND eine Wechseltiefe eingestellt ist, wird es in die TTS einbezogen (Bis zu 5 Gase gleichzeitig). Zudem wird Dir dann auf der Wechseltiefe auch der Gaswechsel durch gelbes Blinken des aktiven Gases der Wechsel empfohlen.
Gruß,
Matthias
- Wednesday 20. September 2023, 10:40
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC PLUS Battery problems
- Replies: 2
- Views: 16228
Re: OSTC PLUS Battery problems
Hello,
Either the battery leaked or you had some water inside the battery compartment. In either way, we need to service the unit at our place (New battery contact, new battery cap, new battery). Please contact us via info@heinrichsweikamp.com in this case.
regards,
Matthias
Either the battery leaked or you had some water inside the battery compartment. In either way, we need to service the unit at our place (New battery contact, new battery cap, new battery). Please contact us via info@heinrichsweikamp.com in this case.
regards,
Matthias
- Tuesday 19. September 2023, 12:48
- Forum: OSTC3, cR, sport and 2
- Topic: FAQ: Batteries in the OSTC plus
- Replies: 1
- Views: 36507
Re: FAQ: Batteries in the OSTC plus
Neuere OSTC+ (So ab 2022) wurden von uns mit einem Akku ausgeliefert, welcher auch über ein Mikro-USB Buchse geladen werden kann. Damit kann man den Akku auch ohne den Qi-Lader aufladen, falls dieser entladen sein sollte und sich nicht über das Ladepad laden lässt. Newer OSTC+ (So from 2022) were su...
- Saturday 16. September 2023, 19:39
- Forum: OSTC 4
- Topic: OSTC Tools for Windows - HWOS Config for Android
- Replies: 48
- Views: 438301
Re: OSTC Tools for Windows - HWOS Config for Android
Hallo, Ihr könnt folgendes probieren: Menu -> SYS2 -> Reset Menu -> Reboot Firmware Dann _sofort_ (Noch bevor das logo erscheint) dreimal kräftig auf die rechte Taste drücken. Es erscheint ein Bildschirm wie angehängt. Aus diesem Modus kannst man das Update nochmal per App starten. Wir nutzen die Ap...
- Thursday 14. September 2023, 14:01
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.2 with RTE 3.10
- Replies: 13
- Views: 61649
Re: hwOS4: New Firmware 1.6.2 with RTE 3.10
Continue here: viewtopic.php?t=22469
- Thursday 14. September 2023, 14:01
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.5 with RTE 3.20
- Replies: 12
- Views: 74696
hwOS4: New Firmware 1.6.5 with RTE 3.20
ENGLISH below. Hallo, Die neue Firmware 1.6.5 ist nun veröffentlicht. heinrichsweikamp.com Anleitung zur Installation: https://forum.heinrichsweikamp.com/viewtopic.php?f=7&t=19186 (Je nach aktueller Version kann es nötig sein, das Update zweimal zu starten. Der OSTC4 gibt dazu nach dem Update nö...
- Wednesday 13. September 2023, 16:53
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC2 startet nicht mehr
- Replies: 6
- Views: 5112
Re: OSTC2 startet nicht mehr
Hallo,
Da passt Spannung und %-Wert zusammen. Wieviel hat er dann denn jetzt bei einem normal TG verbraucht?
Gruß,
Matthias
Da passt Spannung und %-Wert zusammen. Wieviel hat er dann denn jetzt bei einem normal TG verbraucht?
Gruß,
Matthias
- Wednesday 13. September 2023, 08:34
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC2 startet nicht mehr
- Replies: 6
- Views: 5112
Re: OSTC2 startet nicht mehr
Top, danke für die Rückmeldung!
Wenn Du im Logbuch schaust, bei dem letzten gespeicherten TG, welche Spannung (V) und welcher %-Wert für die Batterie wurden da abgelegt?
Gruß,
Matthias
Wenn Du im Logbuch schaust, bei dem letzten gespeicherten TG, welche Spannung (V) und welcher %-Wert für die Batterie wurden da abgelegt?
Gruß,
Matthias
- Tuesday 12. September 2023, 18:36
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC2 startet nicht mehr
- Replies: 6
- Views: 5112
Re: OSTC2 startet nicht mehr
Hallo, Es kann sein, dass sich Dein Tauchcomputer im Tiefschlafmodus befindet, weil die Batterie (vor dem Aufladen) leergelaufen ist. Dann wird der Akku von der restlichen Elektronik getrennt, um ihn vor Tiefentladung zu schützen. Das ist ganz bewußt so implementiert um den (mehr oder weniger) fest ...
- Sunday 10. September 2023, 14:35
- Forum: OSTC3, cR, sport and 2
- Topic: Silicon sleeve
- Replies: 37
- Views: 161500
Re: Silicon sleeve
Hallo Colja,
Das gewünschte STEP file habe ich in diesem Thread doch bereits schon gepostet, am 6.3.2020.
Schau mal die älteren Beiträge durch
Gruß,
Matthias
Das gewünschte STEP file habe ich in diesem Thread doch bereits schon gepostet, am 6.3.2020.
Schau mal die älteren Beiträge durch
Gruß,
Matthias
- Friday 8. September 2023, 10:08
- Forum: OSTC 4
- Topic: OSTC4 – besserer Briefbeschwerer?!
- Replies: 5
- Views: 5452
Re: OSTC4 – besserer Briefbeschwerer?!
Das mit der Tastensperre ist neu, ja. Allerdings ist das 1. Standardmäßig deaktiviert und 2., wie wir finden, ziemlich einfach und selbsterklärend gelöst.
Gruß,
Matthias
Gruß,
Matthias
- Wednesday 30. August 2023, 13:07
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC 2 2022 vs 2017
- Replies: 5
- Views: 6180
Re: OSTC 2 2022 vs 2017
Der ist aus 2017 oder 2018.
Gruß,
Matthias
Gruß,
Matthias