forum.heinrichsweikamp.com

Hi,

40/100 is less safe then 30/90.
If you want a safer GF you have to use 20/80 or so.

From my Point of view 60/80 is not recommendable for trimix.
It might be ok for air or nitrox.

Reiner

Hello, you are mentioning the second value only which is around 90. GF consists of two values. 80 is way to high for the first value. The GF default setting is something like 30/90. Higher values are more "unsafe", lower values are more "safe". Before changing the GF setting make...

Hi, did you set a change depth for the deco gases? If the Change depth is set to "0", the deco gases are not included in the deco calculation. Additional note: This statement is true for the OSTC 2 series. If you are using Firmware 1.0 your Computer is an OSTC 3. I don't know if my Stateme...

yellow is orange and orange is yellow

Emailadresse ?

Hallo,

1. ja
2. kann ich dir per Mail zuschicken

Wir wollen aber schon wissen warum.

Reiner

OSTC 2N > 61 mm diagonal display
OSTC 3 > 51 mm diagonal display

so 2N is better for older divers ;->

that's even better !

you have to do the magnet reset when connected to usb and charging

http://www.heinrichsweikamp.com/#/en/os ... /firmware/

scroll down, open the "i" (information) beside 2.61 and scroll all the way down to the 2.61 zip-link

Hi Frank,

usually HeinrichsWeikamp don't sell their products on the "Boot" -fair in Düsseldorf.
They only sell on order and ship their products.
At least this was the case the last couple of years.

Reiner

with Divinglog, OSTC Tools or JdiveLog:

http://heinrichsweikamp.com/#/de/ostc_2 ... _software/

Hello,

my bootloader is not working anymore and the download-link woun't do it either:
http://www.heinrichsweikamp.net/ostc/do ... loader.zip
Is there another place to download the bootloader?

Regards, Reiner

Hello, i can tell you from own experience that it is not a good idea to rely on a loop po2 of 0,16. Maybe there's a difference inbetween air and water like in a pressure chamber. You will also become narked at a higher pressure in air compared to water. I really like the limit of 0,19. If you want a...

Hi Steve, now it is clear. When you switch back to CCR from bailout the last used bailout gas is your new diluent. That is the only way to switch diluent presently. So if you switched to NX50 as bailout gas, switched back to CCR, descended to 31 meters and CF39 is activated your PO2 will be >2 becau...

Hi steve,

is this a question or a statement?
If it is a question have a look at CF 39 ( po2 correction ).

Reiner

you got mail

Hi,

I have 2.21 and 2.51.
Let me know your email.

Reiner

DTR.Diver66 Wrote: ------------------------------------------------------- >> Matthias wrote: >> >> This is (automatic CCR setpoint changes) and (like >> the scrubber countdown clock) currently not >> planed, sorry. > > > So no more features for technical divers in the > future? Maybe we have to loo...

Hi Abyss, for a deep stop try GF 5/80 or 10/80 ( alternativly 5/90 or 10/90 ). The first GF value controls the deeper stops, the second value controls the shallow stops. The smaller the first value the deeper the first stop. The smaller the second value the longer the shallow stops. Make sure to rea...

DTR.Diver66 Wrote: ------------------------------------------------------- > @Reiner, > > if you don't need the saftey stop, turn it off!!! > > > I think it's good to have a computer which I can > use for all aspects of diving > > > Regards read my replies in the older thread

>heinrichsweikamp Wrote: > >This topic really splits the group here... > > regards, > Matthias Hello, maybe two firmware versions will stop this discussion, one with safety stop and one without safety stop. sarcasm on: Or maybe we need an additional sport diver firmware without Trimix and without CC...

Hello,

you could use the existing cave bailout function if you know your air consumption and the ambient volume of your cylinder.

Reiner

Hi Manuel, there's nothing wrong with that. The Desat time is the time when there's no significant gasload left in your body tissues after a dive. The No Fly time is less than the Desat time as it is safe to fly with some residual gasload. Adding the Desat time and the No Fly time to a sum is not co...