Ok, then explain minimum deco please.
Is it just another name for safety stop???
Then no need to change anything because it's there already.
Search found 401 matches
- Saturday 26. April 2014, 10:57
- Forum: OSTC Mk.2, 2N and 2C
- Topic: Verschiedene Austauchverfahren
- Replies: 26
- Views: 58584
- Friday 25. April 2014, 19:33
- Forum: OSTC Mk.2, 2N and 2C
- Topic: Verschiedene Austauchverfahren
- Replies: 26
- Views: 58584
Re: Verschiedene Austauchverfahren
Hello,
isn't it possible to configure aGF as "minimal deco" and select it when required ( CF 67, 68, 69 )?
Reiner
isn't it possible to configure aGF as "minimal deco" and select it when required ( CF 67, 68, 69 )?
Reiner
- Friday 25. April 2014, 19:08
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTC 2N : serial port
- Replies: 22
- Views: 23819
Re: OSTC 2N : serial port
Are you using a different USB cable then before? Some cables charge fine but the head is to big to be seated all the way and to provide proper contact for data-pins. Make sure to use the same cable which had a good data-connection before. Some people solved this issue by cuting the head of the cable...
- Wednesday 23. April 2014, 15:55
- Forum: OSTC Mk.2, 2N and 2C
- Topic: Request: Split Forums!
- Replies: 4
- Views: 4726
- Saturday 19. April 2014, 22:22
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTC 2n Time To Surface 2207 minutes
- Replies: 2
- Views: 3109
Re: OSTC 2n Time To Surface 2207 minutes
best for now will be to post your profile here
- Tuesday 8. April 2014, 00:05
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC3 - Simulation mode
- Replies: 3
- Views: 4374
Re: OSTC3 - Simulation mode
I can answer 1.
For the TTS calculation only gases set to active will be considered.
Inactive gases can be selected but will not be considered for the TTS calculation.
It is also possible to define and use any other further additional gas underwater.
Reiner
For the TTS calculation only gases set to active will be considered.
Inactive gases can be selected but will not be considered for the TTS calculation.
It is also possible to define and use any other further additional gas underwater.
Reiner
- Saturday 5. April 2014, 13:01
- Forum: OSTC Mk.2, 2N and 2C
- Topic: Uhrzeit OSTC 2N
- Replies: 2
- Views: 6815
Re: Uhrzeit OSTC 2N
Hallo,
die Uhrzeitverschiebung lässt sich mit CF 48 korrigieren.
Mehr Infos hier ( selbst über die Suche gefunden ;-> ):
read.php?2,5066,5113
Gruß, Reiner
die Uhrzeitverschiebung lässt sich mit CF 48 korrigieren.
Mehr Infos hier ( selbst über die Suche gefunden ;-> ):
read.php?2,5066,5113
Gruß, Reiner
- Saturday 8. March 2014, 23:51
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTC 2 - Bungeecord montieren
- Replies: 1
- Views: 2959
Re: OSTC 2 - Bungeecord montieren
Das Cord-Ende mit einem Feuerzeug erhitzen und vor dem Erstarren zu einer Spitze formen.
- Wednesday 12. February 2014, 22:11
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTC2: New 2.90 firmware
- Replies: 33
- Views: 91510
Re: OSTC2: New 2.90 firmware
Hallo,
bei mir gings auch mit der neuen Datei mit Windows 7 nicht.
Mit 7-zip hats geklappt.
Reiner
bei mir gings auch mit der neuen Datei mit Windows 7 nicht.
Mit 7-zip hats geklappt.
Reiner
- Tuesday 11. February 2014, 22:45
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTC2: New 2.90 firmware
- Replies: 33
- Views: 91510
Re: OSTC2: New 2.90 firmware
karip Wrote:
-------------------------------------------------------
> Zip file corrupt ! Cannot open file!
Hello,
Same here.
Web-update working with bootloader V2.
Zip-file will not open nor unzip so no local update possible.
Reiner
-------------------------------------------------------
> Zip file corrupt ! Cannot open file!
Hello,
Same here.
Web-update working with bootloader V2.
Zip-file will not open nor unzip so no local update possible.
Reiner
- Monday 27. January 2014, 00:20
- Forum: OSTC Mk.2, 2N and 2C
- Topic: New 1.70 Stable available
- Replies: 31
- Views: 29175
Re: New 1.70 Stable available
The mail bounced back, does "2000-1" mean "1999" ???
- Monday 27. January 2014, 00:15
- Forum: OSTC Mk.2, 2N and 2C
- Topic: New 1.70 Stable available
- Replies: 31
- Views: 29175
Re: New 1.70 Stable available
You got mail.
I hope you will not dive with it.
I hope you will not dive with it.
- Saturday 25. January 2014, 18:36
- Forum: OSTC Mk.2, 2N and 2C
- Topic: New 1.70 Stable available
- Replies: 31
- Views: 29175
Re: New 1.70 Stable available
your email ???
- Friday 24. January 2014, 18:00
- Forum: OSTC Mk.2, 2N and 2C
- Topic: "boot 2014" - Dive show to come up
- Replies: 8
- Views: 6962
Re: "boot 2014" - Dive show to come up
Hi, i like the idea with different adjustable gas switch depths for descent and ascend. I believe this allows to use a travel gas more effectivly regarding TTS. CF55 on the other hand gave me a lot trouble aswell. This function is useless from my point of view. If you stay longer then required somew...
- Monday 20. January 2014, 21:21
- Forum: OSTC Mk.2, 2N and 2C
- Topic: Surface Interval start...
- Replies: 73
- Views: 189935
Re: Surface Interval start...
Hi Rich, just set CF02 to 30s and you fixed the issue by yourself. Half a minute should not bother, isn't it? Dont't let the try and error with 0s bother you. I believe the reason for this "feature" are the missing wet sensors. Most other computers have issues with their wet sensors. I lik...
- Wednesday 15. January 2014, 21:51
- Forum: OSTC Mk.2, 2N and 2C
- Topic: PSCR Modus / Firmware 2.8
- Replies: 5
- Views: 3807
Re: PSCR Modus / Firmware 2.8
Hallo,
Bailout sollte eigentlich immer gehen vom Kreisel Richtung OC.
Ich kann aber keinen pSCR Tauchgang simulieren.
Wenn der Rechner auf mode pSCR steht, kann ich nur OC simulieren und folglich kein bailout anwählen.
Ist das ein bug?
Reiner
P.S.: ich hab allerdings keine Ahnung von pSCR
Bailout sollte eigentlich immer gehen vom Kreisel Richtung OC.
Ich kann aber keinen pSCR Tauchgang simulieren.
Wenn der Rechner auf mode pSCR steht, kann ich nur OC simulieren und folglich kein bailout anwählen.
Ist das ein bug?
Reiner
P.S.: ich hab allerdings keine Ahnung von pSCR
- Tuesday 3. December 2013, 23:58
- Forum: OSTC Mk.2, 2N and 2C
- Topic: Strange value for future TTS
- Replies: 15
- Views: 10179
Re: Strange value for future TTS
Yes it can, when the dive was quite deep and your tissues are desaturating at 20 meter. In that case your time spent at 20 meters is actually a deco stop. The time you are staying on a deco stop will reduce your TTS. The same will happen on shallower deco stops. When you arrive to 6 meter from a dee...
- Tuesday 3. December 2013, 10:42
- Forum: OSTC Mk.2, 2N and 2C
- Topic: Strange value for future TTS
- Replies: 15
- Views: 10179
Re: Strange value for future TTS
Hi Bardass,
When you stayed for 10 minutes at 60 meters, you are for sure desaturating at 20 meters, even after 5 minutes.
What times are you referring to by x and y?
Reiner
When you stayed for 10 minutes at 60 meters, you are for sure desaturating at 20 meters, even after 5 minutes.
What times are you referring to by x and y?
Reiner
- Thursday 21. November 2013, 21:41
- Forum: OSTC Mk.2, 2N and 2C
- Topic: TTS time
- Replies: 9
- Views: 5724
Re: TTS time
Hi Junkie, you are refering to the ascent time ( Aufstiegszeit ), not to the descent time ( Abstiegszeit ). And you have to consider the ascent from 54 meters to the surface, not only to the first stop. Your total ascent time from 54 meters to the surface with a ascent speed of 8 meters per minute r...
- Wednesday 30. October 2013, 15:16
- Forum: OSTC Mk.2, 2N and 2C
- Topic: Questions about Nofly computation
- Replies: 10
- Views: 6828
Re: Questions about Nofly computation
Lionel Wrote: ------------------------------------------------------- > If things do not go fine and you get 0.2 bar, > you'll probably have an "oxygen mask" on your > mouth. Given the common name (including in safety > message aboard airplane), I assumed it's 100% > oxygen you'll be breat...
- Monday 7. October 2013, 20:48
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTC3: How do I wipe out the whole logbook?
- Replies: 11
- Views: 7079
Re: OSTC3: How do I wipe out the whole logbook?
Didn't know it's a 3.
Should have read the headline.
Maybe time to split up the forum?
Should have read the headline.
Maybe time to split up the forum?
- Sunday 6. October 2013, 18:48
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTC3: How do I wipe out the whole logbook?
- Replies: 11
- Views: 7079
Re: OSTC3: How do I wipe out the whole logbook?
Hi,
try:
> Menu
>> Reset Menu
>>> Reset Logbook
Reiner
try:
> Menu
>> Reset Menu
>>> Reset Logbook
Reiner
- Tuesday 24. September 2013, 17:18
- Forum: OSTC Mk.2, 2N and 2C
- Topic: v2.70+, where does it come from?
- Replies: 9
- Views: 8775
Re: v2.70+, where does it come from?
I thought this forum is a HW forum for HW computer related topics ???
I believe open source doesn't mean it is free to implement the software to other foreign computers.
I believe open source doesn't mean it is free to implement the software to other foreign computers.
- Tuesday 24. September 2013, 17:14
- Forum: OSTC Mk.2, 2N and 2C
- Topic: New menu entry: Goto sleep. Possible? Useful?
- Replies: 5
- Views: 5182
Re: New menu entry: Shutdown Unit. Possible? Useful?
Hello Stephane,
let us know what you want to use this feature for?
Do you mean shutdown from simulation?
Reiner
let us know what you want to use this feature for?
Do you mean shutdown from simulation?
Reiner
- Monday 16. September 2013, 23:47
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTC 2c, nach downgrade nur noch helles Display
- Replies: 6
- Views: 4135
Re: OSTC 2c, nach downgrade nur noch helles Display
Hallo,
schreib HW direkt per Email an, das geht schneller als hier im Forum.
Es gibt einen Magnet-Reset, nutz mal die Suche, vielleicht hilft das.
Gruß, Reiner
schreib HW direkt per Email an, das geht schneller als hier im Forum.
Es gibt einen Magnet-Reset, nutz mal die Suche, vielleicht hilft das.
Gruß, Reiner