"Reset Deco" from the Reset Menu will also reset the CNS counter.
Regards,
Matthias
Search found 4330 matches
- Friday 26. August 2022, 11:47
- Forum: OSTC3, cR, sport and 2
- Topic: CNS / ZNS Reset
- Replies: 1
- Views: 4136
- Wednesday 24. August 2022, 08:55
- Forum: OSTC 4
- Topic: End of charge voltage
- Replies: 5
- Views: 3638
Re: End of charge voltage
A full battery has ~4.1V in the OSTC 4.
Regards,
Matthias
Regards,
Matthias
- Monday 22. August 2022, 11:49
- Forum: OSTC3, cR, sport and 2
- Topic: Problem to upload logbook from 0STC 2 to Diving Log
- Replies: 7
- Views: 5306
Re: Problem to upload logbook from 0STC 2 to Diving Log
Hi,
Thanks for the feedback - and sorry again for the trouble.
Matthias
Thanks for the feedback - and sorry again for the trouble.
Matthias
- Saturday 20. August 2022, 15:47
- Forum: OSTC3, cR, sport and 2
- Topic: Was bedeutet die Anzeige @+1: NZ
- Replies: 2
- Views: 1888
Re: Was bedeutet die Display Anzeige @+1: NZ
Hallo, "@+x" ist die "Future TTS", also die Aufstiegszeit welche x Minuten in der Zukunft herrschen wird. Die Angabe NZ steht für Nullzeit. In Deinem Beispiel war eine Minute in der Zukunft die Deko um und du bekommst wieder Nullzeit angezeigt. @+1:4' heißt: In einer Minute wird ...
- Friday 19. August 2022, 14:41
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.0 with RTE 2.09
- Replies: 7
- Views: 9604
Re: hwOS4: New Firmware 1.6.0 with RTE 2.09
And then a chart below which shows it's charging with speed on the high-end which looks plausible. Even after writing this text and re-checking several times, inlcuding re-activating the screen two times, it's still showing the above only - with no actual numbers only "---". Go to SYS2 ->...
- Friday 19. August 2022, 11:44
- Forum: OSTC 4
- Topic: Deleting one dive from logbook
- Replies: 3
- Views: 4154
Re: Deleting one dive from logbook
We get this request from time to time, but unfortunately it is not so easy to do with the internal data format and the implementation would be quite error-prone and time-consuming.
We should have planned for this (admittedly) from the beginning.
Greetings,
Matthias
We should have planned for this (admittedly) from the beginning.
Greetings,
Matthias
- Friday 19. August 2022, 11:22
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.5.6 with RTE 2.06
- Replies: 6
- Views: 9676
Re: hwOS4: New Firmware 1.5.6 with RTE 2.06
Continue here: viewtopic.php?p=23861
- Friday 19. August 2022, 11:22
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.0 with RTE 2.09
- Replies: 7
- Views: 9604
hwOS4: New Firmware 1.6.0 with RTE 2.09
ENGLISH below. Hallo, Die neue Firmware 1.6.0 ist nun veröffentlicht. heinrichsweikamp.com Anleitung zur Installation: https://forum.heinrichsweikamp.com/viewtopic.php?f=7&t=19186 (Je nach aktueller Version kann es nötig sein, das Update zweimal zu starten. Der OSTC4 gibt dazu nach dem Update nö...
- Thursday 18. August 2022, 18:28
- Forum: OSTC3, cR, sport and 2
- Topic: Screen on one device seems a lot dimmer than another
- Replies: 4
- Views: 5585
Re: Screen on one device seems a lot dimmer than another
Hi,
Firmware does matter, compare with "Use Ambient Sensor: No" settings.
regards,
Matthias
Firmware does matter, compare with "Use Ambient Sensor: No" settings.
regards,
Matthias
- Thursday 18. August 2022, 17:31
- Forum: OSTC 4
- Topic: Deleting one dive from logbook
- Replies: 3
- Views: 4154
Re: Deleting one dive from logbook
Hi,
Release of 1.6.0 will be this weekend, deleting single dives is unfortunately not possible in the OSTC 4.
regards,
Matthias
Release of 1.6.0 will be this weekend, deleting single dives is unfortunately not possible in the OSTC 4.
regards,
Matthias
- Thursday 18. August 2022, 16:52
- Forum: OSTC3, cR, sport and 2
- Topic: Problem to upload logbook from 0STC 2 to Diving Log
- Replies: 7
- Views: 5306
Re: Problem to upload logbook from 0STC 2 to Diving Log
Hi, Due to the way the logbook is stored in the OSTC (This is very deeply anchored in the code and also since >10 years so. And above all, it is not easy to change), it is unfortunately necessary to delete the logbook in such a case. This also resets the pointers to the profile data in memory. After...
- Tuesday 9. August 2022, 14:27
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC sports
- Replies: 3
- Views: 3967
Re: OSTC sports
And remember, that it will start into dive mode automatically. That has not changed with the new version.
regards,
Matthias
regards,
Matthias
Re: Bluetooth
Hallo Markus, Das sind Fragen, die auch zum Teil in unserer FAQ beantwortet sind: In MacOS werden Bluetooth-OSTC nach wenigen Sekunden als "Nicht verbunden" angezeigt Das ist normal. Sobald eine App wie z.B. der OSTC Companion darauf zugreift springt es in den Bluetooth-Systemeinstellungen...
- Tuesday 19. July 2022, 13:27
- Forum: OSTC3, cR, sport and 2
- Topic: Problem to upload logbook from 0STC 2 to Diving Log
- Replies: 7
- Views: 5306
Re: Problem to upload logbook from 0STC 2 to Diving Log
Are the dives visible in the internal logbook?
Try unticking the "Download new dives only" box in the divinglog App.
regards,
Matthias
Try unticking the "Download new dives only" box in the divinglog App.
regards,
Matthias
- Monday 4. July 2022, 14:19
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC 2TR battery problem?
- Replies: 3
- Views: 2642
Re: OSTC 2TR battery problem?
Hi, Setup from the Reset menu -> Reset battery to the correct T4 type and recharge the unit overnight as recommended in the manual, Page 44: For all OSTCs with rechargeable batteries (OSTC2, cR and OSTC plus when using the recommended 3.7 V LiIon battery), the OSTC must be fully charged after each r...
- Tuesday 28. June 2022, 11:23
- Forum: OSTC 4
- Topic: OST4 external interface. Which one?
- Replies: 7
- Views: 5571
Re: OST4 external interface. Which one?
Hi, This depends on the rebreather you might get. All modern eCCR have O2 monitoring and display/HUD included. Here, you really do not need to add the OSTC 4 with monitoring option. It's a different story for KISS, other mCCR or dedicated deco/oxygen rebreathers. The OSTC 4 is available in three opt...
- Tuesday 21. June 2022, 15:47
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC sport does not switch on with buttons
- Replies: 4
- Views: 2255
Re: OSTC sport does not switch on with buttons
be shure that the compas is calibrated properly, cause the wake-up is depending on the magnetic sensor (if i remember it right). Not quite. The accelerometer is used in some versions of the OSTC 2 and plus to enable the buttons when the unit is not moved for 24h. Not relevant here for the OSTC spor...
- Saturday 18. June 2022, 10:53
- Forum: OSTC3, cR, sport and 2
- Topic: Bluetooth issues // Firmware update malfunction
- Replies: 11
- Views: 9213
Re: Bluetooth issues // Firmware update malfunction
Hi,
new MAC OS and the M1 processor still cause trouble when downloading from BLE dive computers with subsurface: https://subsurface.github.io/faq/#i-can ... --monterey
Regards,
Matthias
new MAC OS and the M1 processor still cause trouble when downloading from BLE dive computers with subsurface: https://subsurface.github.io/faq/#i-can ... --monterey
Regards,
Matthias
- Thursday 2. June 2022, 19:24
- Forum: OSTC3, cR, sport and 2
- Topic: Rückenplatte für OSTC Plus
- Replies: 2
- Views: 1767
Re: Rückenplatte für OSTC Plus
Hallo,
Die für den "OSTC plus" oder den neuen "OSTC+" gibt es (noch) nicht.
Gruß,
Matthias
Die für den "OSTC plus" oder den neuen "OSTC+" gibt es (noch) nicht.
Gruß,
Matthias
- Thursday 2. June 2022, 19:12
- Forum: OSTC3, cR, sport and 2
- Topic: Bug in button menu in 3.18 firmware?
- Replies: 2
- Views: 1096
Re: Bug in button menu in 3.18 firmware?
If the button still is too insensitive in the 2015 OSTC 2, we can replace these, of course. There are no known issues with this firmware and your hardware. When leaving the menu, the new settings are applied (Behaviour is different in newer OSTC 2).
Regards,
Matthias
Regards,
Matthias
- Friday 27. May 2022, 11:32
- Forum: OSTC3, cR, sport and 2
- Topic: HUD standalone
- Replies: 1
- Views: 1459
Re: HUD standalone
Discontinued due to lack of demand. Modern eCCR rebreathers come with factory HUD for many years now...
Regards,
Matthias
Regards,
Matthias
- Friday 20. May 2022, 11:20
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC 2: Battery 99% after Empty Battery (T4)
- Replies: 2
- Views: 1639
Re: OSTC 2: Battery 99% after Empty Battery (T4)
Hi, We have a rather large warning about this behavior in the manual for many years now. But with many users now starting to use the OSTC again after >2 years of storage this is currently a common question here at our support team. If the battery of the OSTC was discharged, the OSTC should be charge...
- Saturday 14. May 2022, 14:53
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC Companion cannot connect to OSTC Sport
- Replies: 1
- Views: 1458
Re: OSTC Companion cannot connect to OSTC Sport
Is this a hwOS problem that can (and will) be fixed in an new hwOS version? Or is a new OSTC Companion Version needed and will be provided someday? Or is OSTC Companion end of support and Subverison is the last remaining program for MacOS users to make hwOS updates? PS / If an iPhone is "at ha...
- Tuesday 10. May 2022, 14:21
- Forum: OSTC3, cR, sport and 2
- Topic: CCR Modus, Wechsel zwischen Bailout und Loop
- Replies: 9
- Views: 2311
Re: CCR Modus, Wechsel zwischen Bailout und Loop
Ich würde wirklich darauf tippen, dass Du den Wechsel Bailout -> Zurück auf CCR innerhalb eines Tiefensamples gemacht hast (innerhalb max. 10 Sekunden). Dann bleibt der Event "Bailout" an diesem Daten-Sample stehen und das könnte das Verhalten des internen Logbuchs erklären. Gruß, Matthias
- Tuesday 10. May 2022, 14:19
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTC 2C Problems
- Replies: 5
- Views: 6391
Re: OSTC 2C Problems
Hi,
We really need to check the unit here at the factory. Do not attach to USB anymore, even when there is only little amount of water in the bulkhead. Please contact us: info@heinrichsweikamp.com via email for details.
regards,
Matthias
We really need to check the unit here at the factory. Do not attach to USB anymore, even when there is only little amount of water in the bulkhead. Please contact us: info@heinrichsweikamp.com via email for details.
regards,
Matthias