Search found 699 matches

by Ralph
Wednesday 27. October 2021, 08:45
Forum: OSTC3, cR, sport and 2
Topic: Problem while charging OSTC2
Replies: 5
Views: 2507

Re: Problem while charging OSTC2

The USB power supply needs to be capable of supplying >= 2A, which is far more than the USB standard. So look for a homespun supply with sufficient power. Most "high power" cell phone chargers won't do as the OSTC charging puck does not do the USB power negotiation protocol, especially not...
by Ralph
Friday 24. September 2021, 06:22
Forum: OSTC3, cR, sport and 2
Topic: Dekoberechnung OSTC2
Replies: 7
Views: 2757

Re: Dekoberechnung OSTC2

Der erste Teil des Zitats bezieht sich im Büchlein noch auf den Teil wo GF lo = GF high ist. Dann lässt dich der OSTC immer nur bis GF % an das Bühlmann Limit heran, egal ob Stopp "unterwegs" oder finaler Stopp = Oberfläche. Mit GF lo < GF high wird es etwas unübersichtlicher, weil auf jed...
by Ralph
Sunday 12. September 2021, 11:00
Forum: OSTC3, cR, sport and 2
Topic: OSTC Sport set up for sidemount
Replies: 8
Views: 3643

Re: OSTC Sport set up for sidemount

Hi, assuming you are using the same gas in both tanks: you can either set up one tank on the OSTC representing BOTH of the real tanks, set the size of the tank to the combined size of the real tanks. Or you can set up two tanks in the OSTC, both with the size of the corresponding real tank, set same...
by Ralph
Saturday 28. August 2021, 08:48
Forum: OSTC3, cR, sport and 2
Topic: Gas density
Replies: 3
Views: 1776

Re: Gas density

Hi, our values are based on an upcomming ISO standard for gas density considerations in diving. They are also based on 1.0000 bar to be able to directly multiply them with the ppN2, ... pressures. Water temperature is not the relevant factor, as the gas leaves the 1st stage at negative (°C) temperat...
by Ralph
Wednesday 14. July 2021, 18:30
Forum: OSTC3, cR, sport and 2
Topic: Battery completely empty
Replies: 15
Views: 8193

Re: Battery completely empty

The OSTC probably needs some minimum of charge in order to (re-)start the CPU.
by Ralph
Friday 9. July 2021, 17:48
Forum: OSTC3, cR, sport and 2
Topic: TTS bei deaktivierten Dekogasen, Bug?
Replies: 23
Views: 17160

Re: TTS bei deaktivierten Dekogasen, Bug?

Zur Sicherheit gerade nochmal im Code nachgesehen: Nein - die Reihenfolge (d.h. unter welcher Nummer welches Gas angelegt ist) spielt keine Rolle. Es werden immer alle 5 Gase abgeprüft. Deshalb muss man auch das erste Gas explizit einstellen, weil es eben nicht über seine Position in der Gasliste de...
by Ralph
Tuesday 29. June 2021, 17:42
Forum: OSTC3, cR, sport and 2
Topic: Swap on empty
Replies: 3
Views: 1765

Re: Swap on empty

If set to yes, the OSTC will also make a contingency deco planning in that if gas needs calculations says you're running out of e.g. O2, it will automatically continue calculating with the next best gas that's computed to not being used up yet, like your Nx50, and so on. So it ties to get you a TTS ...
by Ralph
Monday 21. June 2021, 18:19
Forum: OSTC3, cR, sport and 2
Topic: TTS bei deaktivierten Dekogasen, Bug?
Replies: 23
Views: 17160

Re: TTS bei deaktivierten Dekogasen, Bug?

Sollte nicht, da gemäß der von mir oben beschriebenen Regeln die jeweils zum aktuellen Gas gewählten Gase "besser" sind als das einzig aktive in der Gasliste (Luft, 56m vermutlich) und somit die Berechung _keine_ besseren Gase in der Gasliste findet und somit _nicht_ vom aktuellen Gas wegs...
by Ralph
Monday 21. June 2021, 18:01
Forum: OSTC Mk.2, 2N and 2C
Topic: Salinity
Replies: 1
Views: 2470

Re: Salinity

The salinity setting just does a little correction of the indicated depth, but has no influence on any of the deco calculations as these are purely based on pressure. For the depth correection actually not the salinity itself is the key factor, but the density (weight) of the water, which is also in...
by Ralph
Saturday 19. June 2021, 19:58
Forum: OSTC3, cR, sport and 2
Topic: hwOS Sport: New Firmware 10.70
Replies: 24
Views: 15935

Re: hwOS Sport: New Firmware 10.70

Try out yourself! Install the update, start the dive simulator and switch to the large font layout...
by Ralph
Thursday 17. June 2021, 12:32
Forum: OSTC3, cR, sport and 2
Topic: TTS bei deaktivierten Dekogasen, Bug?
Replies: 23
Views: 17160

Re: TTS bei deaktivierten Dekogasen, Bug?

Hallo Alex, jein... Der OSTC aktualisiert seine Berechnungsergebnisse bei einem Gaswechsel, weil er diese so wie so alle paar Sekunden aktualisiert. Für die Berechnung eines Deko-Aufstiegs guckt er dabei die Gastabelle durch, und wenn sich da ein Gas findet das a) aktiviert ist (geht nur übers Haupt...
by Ralph
Monday 14. June 2021, 17:34
Forum: OSTC3, cR, sport and 2
Topic: TTS bei deaktivierten Dekogasen, Bug?
Replies: 23
Views: 17160

Re: TTS bei deaktivierten Dekogasen, Bug?

Yupp, funktioniert also "as per Design" :-) > Danach das 50er aktiviert, TTS blieb auf 16 min stehen hätte aber auf 9 min reduziert werden müssen. Gase die zu Beginn des TG deaktiviert waren kann man während des TG nicht mehr "aktivieren" in dem Sinne dass die Deko-Berechnung sie...
by Ralph
Friday 11. June 2021, 17:58
Forum: OSTC3, cR, sport and 2
Topic: IBCD calculations
Replies: 4
Views: 8501

Re: IBCD calculations

The IBCD (sometimes also called ICD) attention message is not based on a certain increment, but on a set of conditions. The IBCD message is in all hwos Tech versions and can be enabled via the menu. IBCD can only occur in a trimix dive. The following conditions all need to be met to set off the IBCD...
by Ralph
Thursday 10. June 2021, 13:08
Forum: OSTC3, cR, sport and 2
Topic: Dumb Question - resetting MoD
Replies: 3
Views: 1512

Re: Dumb Question - resetting MoD

You don't set the MOD of a gas! You set the CHANGE DEPTH (with the +/- menu items)!! The CHANGE DEPTH controls which gases are deployed during the deco ascent calculation. The "reset to MOD" is only a one-step-adjustment aid to set the change depth. Best to run a demo dive in the simulator...
by Ralph
Wednesday 9. June 2021, 19:12
Forum: OSTC3, cR, sport and 2
Topic: Passing through a gas change.
Replies: 4
Views: 2687

Re: Passing through a gas change.

Yep, that's how it goes. Just to repeat in other words: The OSTC calcuates TWO decompression plans in parallel: Plan 1: your current (super-)saturations and the resulting ceiling / 1st stop depth and current CNS <- based on which gases were breathed during the dive, i.e. were selected & shown in...
by Ralph
Wednesday 9. June 2021, 18:45
Forum: OSTC3, cR, sport and 2
Topic: Dumb Question - resetting MoD
Replies: 3
Views: 1512

Re: Dumb Question - resetting MoD

Hi, "Reset to MOD" is just a convenience function to adjust the change depth to the MOD (max operating depth), which is computed by the O2 in the mix and the type of gas (work vs. deco). The key parameter is the change depth, and this is not automatically slaved to a calculated MOD as chan...
by Ralph
Tuesday 8. June 2021, 17:02
Forum: OSTC3, cR, sport and 2
Topic: Update von 3.13 auf 3.15 nicht möglich
Replies: 23
Views: 8130

Re: Update von 3.13 auf 3.15 nicht möglich

Falls es hilft, einer der Klassiker: zur FW-Aktualisierung vorher NICHT 'verbinden' ausgewählt!?!
by Ralph
Wednesday 19. May 2021, 14:17
Forum: OSTC3, cR, sport and 2
Topic: TTS bei deaktivierten Dekogasen, Bug?
Replies: 23
Views: 17160

Re: TTS bei deaktivierten Dekogasen, Bug?

Hallo, meine Nase war gesamtsituations-bedingt auch lange nicht im Code, aber es gibt definitiv keine Sonder-Behandlung für Sauerstoff als Gas. Alle Gas-Wechsel-Entscheidungen der Deko-Berechnung sind ausschließlich von der jeweils eingestellten Wechseltiefe gesteuert, in Verbindung mit der "Ex...
by Ralph
Monday 17. May 2021, 07:38
Forum: OSTC3, cR, sport and 2
Topic: Anzeige Sättigung im Logbuch
Replies: 5
Views: 2105

Re: Anzeige Sättigung im Logbuch

Die Tauchgangsdauer-Zählung stoppt wenn der OSTC die Entscheidungs-Tiefenschwelle für das TG-Ende erreicht, intern läuft aber eine Uhr weiter. Bewahrheitet sich das TG-Ende, wird diese Zeit ins Logbuch übernommen. Erkennt der OSTC eine TG-Fortsetzung, dann wird die TG-Dauer aus der internen Uhr aufg...
by Ralph
Sunday 16. May 2021, 13:20
Forum: OSTC3, cR, sport and 2
Topic: Anzeige Sättigung im Logbuch
Replies: 5
Views: 2105

Re: Anzeige Sättigung im Logbuch

Hallo Patrick, das hast du gut beobachtet und analysiert! In der Tat rechnet der OSTC während der TG-Ende "Nachlaufzeit" weiter mit dem eingestellten Gasgemisch. Diese Nachlaufzeit dient zusammen mit einer Hysterese in der Druck-(Tiefen-)Messung dazu, das Ende des Tauchgangs zu detektieren...
by Ralph
Wednesday 28. April 2021, 19:07
Forum: OSTC3, cR, sport and 2
Topic: Battery status
Replies: 9
Views: 4041

Re: Battery status

Ehm, you don't need a full discharge first, just a charge to full. The OSTC electronics tracks the battery voltage und charging current, detects the end-of-charging state and then sets the SOC (state of charge) counter according to the selected battery type.
by Ralph
Sunday 18. April 2021, 21:29
Forum: OSTC3, cR, sport and 2
Topic: Anzeige Nullzeit im TG-Planer
Replies: 3
Views: 2214

Re: Anzeige Nullzeit im TG-Planer

Hallo, die Funktion ist in der aktuellen hwOS Firmware drin, vielleicht ein wenig versteckt: Simulator-Menü -> Interval (weitere Pause bis zum nächsten TG), Tiefe und eine Grundzeit die noch innerhalb der Nullzeit liegt einstellen und den Kalkulator starten. Dann seht ihr in der zweiten Zeile die ei...
by Ralph
Saturday 27. March 2021, 17:01
Forum: OSTC3, cR, sport and 2
Topic: Passing through a gas change.
Replies: 4
Views: 2687

Re: Passing through a gas change.

Hi, you have to distinguish between the displayed as-of-now data and the calculated decompression plan data: The as-of-now-data such as current depth, next stop depth (lower right), ceiling & (super-)saturation (custom view) are computed on the basis of what you have done up to now. So for the d...
by Ralph
Friday 5. March 2021, 14:40
Forum: OSTC3, cR, sport and 2
Topic: sport 10.68 firmware display issue
Replies: 2
Views: 1475

Re: sport 10.68 firmware display issue

That's the "custom text" which seems to have not been retained from the old firmware, probably because you made a bigger jump in the FW versions. You can simply replace it by your favorite custom text via the 'name' function in OSTC companion or other OSTC tools.

BR
Ralph
by Ralph
Friday 4. December 2020, 09:27
Forum: OSTC3, cR, sport and 2
Topic: OSTC Sport - Gasbedarf
Replies: 16
Views: 7236

Re: OSTC Sport - Gasbedarf

Zitat: "Der View kann die Druckbedarfe von bis zu 4 Gasen anzeigen. Nicht benötigte Anzeigepositionen sind mit ------- gefüllt." Statt der Striche hätte ich auch einfach "nichts" ausgeben können, aber die Striche sind mit Absicht gemacht: so sieht man auf den ersten Blick dass di...