Search found 4347 matches

by heinrichsweikamp
Monday 8. May 2023, 17:52
Forum: OSTC 4
Topic: ERR Showing in hpa and celsius
Replies: 11
Views: 66532

Re: ERR Showing in hpa and celsius

TDR wrote: Saturday 29. April 2023, 20:38 Computer glitched with large numbers in top left. Now shows err in hpa and celsius
"ERR" is short for "Error" and indicates a hard-defect at the pressure sensor. Since you are in contact with us already we'll have this fixed soon.

regards,
Matthias
by heinrichsweikamp
Monday 17. April 2023, 11:20
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC Sport has "aversion" to standby mode
Replies: 2
Views: 2538

Re: OSTC Sport has "aversion" to standby mode

I would think this is more a hardware problem. Please get in contact with us. Maybe a pair of new buttons will fix this (These can be easily replaced by the user in the OSTC sport).

info@heinrichsweikamp.com

Regards,
Matthias
by heinrichsweikamp
Monday 17. April 2023, 11:19
Forum: OSTC 4
Topic: Warming while charging
Replies: 8
Views: 38037

Re: Warming while charging

Hi,

Next version will be water cooled ;-)

Regards,
Matthias
by heinrichsweikamp
Friday 14. April 2023, 18:01
Forum: OSTC 4
Topic: Cold start
Replies: 3
Views: 10451

Re: Cold start

Once properly charged, you get the % reading again.

Regards,
Matthias
by heinrichsweikamp
Thursday 13. April 2023, 12:35
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Android App shows incorrect firmware
Replies: 1
Views: 2249

Re: Android App shows incorrect firmware

Yes, just select the "sport" firmware in the App and install it.

regards,
Matthias
by heinrichsweikamp
Thursday 13. April 2023, 11:39
Forum: OSTC 4
Topic: OSTC 4 with 3x Solid-State Sensor
Replies: 4
Views: 11467

Re: OSTC 4 with 3x Solid-State Sensor

Hi, This will require additional electronics in your rebreather head. We have such electronics developed already but it's still being tested and is not yet supported in the OSTC 4 firmware. uart_multiplexer.jpg Power will be supplied from the OSTC 4 for all sensors. It has more then enough battery c...
by heinrichsweikamp
Sunday 2. April 2023, 17:12
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: hwOS TECH: New Firmware 3.19
Replies: 16
Views: 31155

Re: hwOS TECH: New Firmware 3.19

3.20 TECH is the current version, that's correct. 3.21 coming very soon...

Regards,
Matthias
by heinrichsweikamp
Friday 31. March 2023, 09:48
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: hwOS Sport: New Firmware 10.76
Replies: 0
Views: 91325

hwOS Sport: New Firmware 10.76

Hello, The new hwOS sport firmware 10.76 is now available for download: https://heinrichsweikamp.com/service/firmwares The following changes have been applied: [10.76] FIX: Wrong release date in 10.75 showed "Update!" message prematurely CHANGE: Compatibility for new hardware versions [10....
by heinrichsweikamp
Wednesday 8. March 2023, 16:22
Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
Topic: usb burn
Replies: 1
Views: 7789

Re: usb burn

Hi,

Unlikely that this is repaireable in the 2N, unfortunately. But let us have a look and contact us at info@heinrichsweikamp.com

Regards,
Matthias
by heinrichsweikamp
Friday 3. March 2023, 14:11
Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
Topic: OSTC2 or OSTC+
Replies: 1
Views: 8890

Re: OSTC2 or OSTC+

Hi, We really should update our comparison PDF again... Will do on the weekend. For the time being, here is our catalogue as a PDF file. It also contains all models: https://heinrichsweikamp.net/downloads/katalog_hw_2023_WEB.pdf The OSTC 2 is completely closed (Qi charging, fixed internal battery, B...
by heinrichsweikamp
Tuesday 28. February 2023, 15:25
Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
Topic: Cannot connect 2C and 2N to windows 11 laptop
Replies: 11
Views: 20664

Re: Cannot connect 2C and 2N to windows 11 laptop

I've an Asus WIndows 11 Laptop and decided I want to use my OSTC 2C and 2N better i.e. some customisation and download the divelogs. I strongly recommend the Software Diving Log ( https://www.divinglog.com/english/home/index.php )or Subsurface ( https://subsurface-divelog.org/ ) for this task. The ...
by heinrichsweikamp
Tuesday 28. February 2023, 14:35
Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
Topic: Cannot connect 2C and 2N to windows 11 laptop
Replies: 11
Views: 20664

Re: Cannot connect 2C and 2N to windows 11 laptop

Hi, See our FAQ, please: https://heinrichsweikamp.com/index.php/service/faq OSTC Comanion says "Port not defined" The communication port assigned by the operating system must be set. To do this, click on the gearwheel symbol next to the selection menu. Further settings can also be made the...
by heinrichsweikamp
Tuesday 28. February 2023, 14:32
Forum: OSTC 4
Topic: Cold start
Replies: 3
Views: 10451

Re: Cold start

Hi,

Keep the unit charging overnight so the battery reached a proper 100% state of charge.

"Cold start" is a term indicating that the unit woke-up from a power-down state.

Regards,
Matthias
by heinrichsweikamp
Monday 20. February 2023, 18:56
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Manuellen Log-Eintrag / Log-Nr überpringen
Replies: 3
Views: 5147

Re: Manuellen Log-Eintrag / Log-Nr überpringen

Hallo,

Ja, das geht leider nicht. Das Datenformat macht eine nachträgliche Änderung/Löschen eines Tauchgangs oder das Einfügen eines Tauchgangs sehr aufwändig.

Gruß,
Matthias
by heinrichsweikamp
Monday 30. January 2023, 19:07
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC Sport won't start with a SAFT lithium 3.7v battery.
Replies: 4
Views: 3531

Re: OSTC Sport won't start with a SAFT lithium 3.7v battery.

No. The unit must show something as soon there is sufficient voltage between the "+" and when the battery cap is properly closed. Make sure the "+" contact of the battery mates the little "+" contact at the bottom of the battery compartment.

Regards,
Matthias
by heinrichsweikamp
Saturday 14. January 2023, 16:50
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Installed the wrong FW on my brand-new OSTC+ cR
Replies: 3
Views: 4233

Re: Installed the wrong FW on my brand-new OSTC+ cR

See the readme.txt of the firmware package: https://heinrichsweikamp.com/index.php/service/firmwares For OSTC cR, OSTC+ and OSTC 3 with O2 Sensor functions use ???_EN_3_cr_ostc3_firmware.hex English Version ???_DE_3_cr_ostc3_firmware.hex German Version ???_FR_3_cr_ostc3_firmware.hex French Version ?...
by heinrichsweikamp
Monday 9. January 2023, 10:10
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: down red arrow cR
Replies: 1
Views: 2783

Re: down red arrow cR

Hi,

It indicates that the sensors are end-of-life (<8mV for ppO2 of 0.21bar).

regards,
Matthias
by heinrichsweikamp
Tuesday 3. January 2023, 19:27
Forum: OSTC 4
Topic: 1.6.0 and 2023
Replies: 5
Views: 10645

1.6.0 and 2023

Hallo, Es hat bis zum 3.1. gedauert aber dann haben sich gleich mehrere Kunden gemeldet: Das Datum lässt sich im OSTC 4 manuell nicht über 2022 hinaus einstellen. Das ist uns irgendwie durchgerutscht... Das wird natürlich im nächsten Update aber wieder möglich sein. Work-Around (Und der Grund warum ...
by heinrichsweikamp
Friday 23. December 2022, 09:16
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Datentransfer und Batteriekapazitität
Replies: 9
Views: 11425

Re: Datentransfer und Batteriekapazitität

da gabs mal einen thread dazu - find den grad nicht (die sufu ist eher grottig) und ich glaube mich erinnern zu können, das matthias schrieb, das die 1,5V AA nur eine art "notbetrieb" darstellt..... Die Suche ist in der Tat nicht gut, aber hier ein Trick der auch für viele andere Seiten f...
by heinrichsweikamp
Thursday 15. December 2022, 15:20
Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
Topic: Where is the Source Code
Replies: 3
Views: 9718

Re: Where is the Source Code

Hi,

You can find the code here: https://code.heinrichsweikamp.com/public

regards,
Matthias
by heinrichsweikamp
Tuesday 6. December 2022, 14:04
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: OSTC Sport 2014 Tasten defekt
Replies: 2
Views: 3452

Re: OSTC Sport 2014 Tasten defekt

Hallo, In den Tastern sind Magnete verbaut. Evtl. sind diese bei Deinem OSTC gebrochen oder korrodiert und haben an Kraft verloren. Die Taster lassen sich beim OSTC sport Bj. 2014 problemlos selber wechseln: https://www.facebook.com/heinrichsweikamp/videos/2583645938565261 - Vielleicht reicht es die...
by heinrichsweikamp
Sunday 20. November 2022, 13:36
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: O2 Sensor on cR not accessible
Replies: 2
Views: 3079

Re: O2 Sensor on cR not accessible

See the readme.txt from the Update package: For OSTC cR, OSTC+ and OSTC 3 with O2 Sensor functions use ???_EN_3_cr_ostc3_firmware.hex English Version ???_DE_3_cr_ostc3_firmware.hex German Version ???_FR_3_cr_ostc3_firmware.hex French Version ???_IT_3_cr_ostc3_firmware.hex Italian Version Then, the &...
by heinrichsweikamp
Tuesday 15. November 2022, 15:47
Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
Topic: Ostc 2 übertragen Timeout
Replies: 5
Views: 6275

Re: Ostc 2 übertragen Timeout

Hi Dennis,

Damit sind FW-seitig keine Probleme bekannt. Ich kann auch meinen OSTC hier mit Subsurface problemlos parametrisieren (Windows 10).

Gruß,
Matthias