forum.heinrichsweikamp.com

Die Titelzeile mit "(bar)" am Ende legt nahe, dass die Zahl(en) darunter Angaben in bar also Drücke sind... Der View kann die Druckbedarfe von bis zu 4 Gasen anzeigen. Nicht benötigte Anzeigepositionen sind mit ------- gefüllt.

Hallo Jan, die Gasbedarfs-Berechnung und Warnung war ursprünglich nur für den CCR-Modus gedacht um zu warnen, wenn es für einen Bailout-Aufstieg anfängt knapp zu werden. Dazu sind dann die Fülldrücke (ggf. Abzüglich einer "eisernen Reserve") der einzelnen Gase einzugeben. Dann ist mir bei ...

Am "Startgas" liegt es nicht und die AMV (SAC)-Raten gelten nicht für die jeweiligen Gase, sondern für die Phasen des TG: normal und in der Deko (genauer: auf einem Stop). Evt. liegt der Fehler darin dass du dem Startgas keine Wechseltiefe (MOD) gegeben hast. Das ist eine Schwäche in der a...

Hi Jean, the display problem will most likely go away with an updated firmware, because it is not a hardware problem but the software is just stuck in printing in reverse mode. Seems to be a bug in that old firmware. You do not need to install every single update. As you will be doing a big jump, yo...

Hi, i think that solution is warm, but not hot. Try out this: gas1: Air, 56m, first gas2: Nx50, 21m, disabled gas3: O2, 6m, deco gas4 & 5 disabled Start the simulator, descent to 30 m and then give the dive some +5' such that the first stop goes down to 12 to 15 meters. Now ascent to 20 meters a...

I really had to look into the code to give a prceise answer. Here it is: 1) The GF-low reference depth is set to the depth of the deepest deco stop found during the whole dive. 2) When two plan are calculated (fTTS or OC bailout), each plan has its own GF-low reference depth. 3) When the GF factors ...

Hallo Enrico, die aktuelle 2er Software berechnet die TTS parallel mit der Berechnung des Deko-Plans. Beide basieren auf den verfügbaren aktiven Deko-Gasen sowie dem aktuellen Gas. Die Berechnung beginnt mit dem aktuellen Gas und schaltet dann entlang des Aufstiegs auf eines der Deko-Gase um, wenn d...

Ah, that's DISPLAY settings, having nothing to do with DECO settings! This is the "Speed .. adaptive" setting i wrote about: if switched on, the color coding of the vertical speed bargraph depends on current depth, becoming more erarly red the shallower you are. 10m/min is - at least as of...

Where do you have a Variable Speed Parameter?

Main Menu -> ... ?

Hi Yves, "Variable Speed" is no longer in the current hwOS firmware. As of now, the OSTC always calculates the ascent with 10m/min, as defined within the Bühlmann model. This parameter or better to say speed limitation is important, as can be seen when looking at the half-times of the fast...

Hi Yves, that's probably one of the longest posts we ever had! I'll try to catch the remaining open items only: Ascents are calculated with 10m/min, because that's the design of the Bühlmann model. Sure the slower the better, so when you do 6m/min or even just 1m/min up from the last stop you'll be ...

Hi, you are good on track and actually already deep into the details of the deco calculation algorithm. NDL x' is the "count-down" of remaining NDL time. With x = 0 you are riding on the edge of the NDL (in German language we call that "Nullzeitschrammeln"). It is correct that th...

The supersaturation bars show the sum of N2+ He, as this is what goes into the deco calculation and what the GF low, GF high and m-line is rated against. The turquoise bar actually just looks like a bar when there is no supersaturation at all, indeed it the 16 horizontal lines that show the relative...

Ähm, sorry, too much other stuff can into way... Did the results fit with your expectation? From my side, and some background information: Saturation and Desaturation factors are written in sequence sat & desat, with sat >= 100% and dest <= 100%. Technically, they speed up gas uptake and slow do...

Hallo, wir haben die letzte Zeit schon ein paar mal an den Farben getuned, aber sowie man sie etwas heller macht melden sich die Benutzer mit Farbsehschwäche, die stark auf Helligkeits-Unterschiede angewiesen sind. Noch dazu baut die aktuelle Software auf eine klare Farben-Sprache: weiß: normal gelb...

Hallo, in der hwOS Sport & Tech für die aktuellen 2er Modelle gibt und gab es diese Custom Functions nicht. Das war etwas in der 2N & Co, Generation, da die dort verbauten Prozessoren noch nicht so viel Speicher hatten dass man alles wesentliche über das eingebaute Menüsystem zugänglich mach...

Hallo Markus, was meinst du mit "nicht neu rechnet"? Dass man während des TG nicht aktivierte Gase auswählen kann, ist beabsichtigt. Wie bei jeder Gaswahl rechnet der OSTC ab(!) dem Gaswechsel den weiteren Verlauf des Tauchgangs mit dem neuen Gas, bis ein weiteres aktiviertes Gas zu einem ...

Well, i am still hoping Matthias takes over answering that post, as he's much deeper in all that battery stuff than me... ;-)

For the 1.5 V battery, there is a combination of power consumption calculation and battery voltage levels. The lower one determines the resulting percentage that is shown. Please note that 1.5V cells in the Plus model are intended for emergency use only, as this model internally runs on 3 Volt. So a...

May you share your results? As one of the OSTC programmers, i'd be curious to see if results are what i supposed them to be by independend testing... :-)

The capacities are hard-coded, so the battery selection via the menu is the only way to tell the OSTC what type of battery is used. Caution with the mAh given by the cell manufactureres (or sellers): the bigger the numbers, the more overestimated they often are...

Unfortunately other brands than Shearwater do not match that good (to either OSTC or Shearwater), as these tend to add internal safety factors that result in more deco obligation than a calculation with plain & strict Bühlmann and E.Baker GFs would yield.

There's one kown bug around reboot during a dive posted here on the forum, but it involves a specific combination of TR model and compass operation. But that's both not the case with your incident, so it is most likely what Matthias already suggested: contact problem with the battery. The software v...

Hello Hens, are you having a TR-model OSTC and/or did you had the compass view active when the reboot happend? May you also provide the OSTC hardware version: Settings -> Information -> more : the string in the line titled "Hardware" will help us to identify you exact model and production ...

Hi,

have you checked CCR/pSCR Setup -> more -> S8 Input : check set to Digital ?

Older firmware had auto-detection which wasn't 100% reliable, to its now manual selection.