forum.heinrichsweikamp.com

Thanks for pointing this out, mine is now on 2 March.

Upgraded. Make sure you fully charge computer after upgrade as it resets the battery to 100%.

I had to rename the file to remove the two full stops for it to work with Subsurface. Installed okay then. Thanks Matthias!

There is no way to change or show, that is what I asked Matthias to consider implementing (eg red figures and % when charging, green when full, white when not charging).

Yes, I posted this a while back that when you have the % showing you cannot tell if it is actually charging. A simple solution is for the figures to change colour when charging and again when fully charged.

On mine when % is showing (not the battery symbol) the colour is white no matter what. When the battery symbol is selected, the colours show as you mention.

Matthias

Can I suggest that the new % battery display be colour coded so that when it is charging it is a colour other than white. At the moment it can be hard to tell if the USB plug is correctly installed.

Thanks

I believe so.

Suggest contacting HW via their web site. Obviously a problem.

Mine does this sometimes. I need to wiggle the USB connector at the OSTC end. Also try putting some WD40 on it.

I have CF71 set to 6.1 so that it starts at 6 metres. Works well.

Obvious that the OSTC only counts safety stop when shallower than or equal to 5.0 metres. If you look at one spot, there is only one second difference between the safety stop countdowns. Later, the OSTC is about 30 seconds behind. This means that the countdown stops when deeper than 5.0 metres. This...

Also, all Custom Functions III seem to reset to the default, so check before you dive.

My 2N is very accurate with regards to temperature.

I think that if CF-16 is set to 1, the deco shown as been required is worked out as if you are doing it one metre deeper than the depth it should be done at. That is, it assumes that you will do your 12 m stop at 13 m, 9 m at 10 m etc. It does not calculate your depth one metre deeper during the div...

Note that some things reset back to default, for example, safety stop (off and depths), alternate GF (off) and perhaps others.

My guess from looking at it is that CF74 counts how many minutes the OSTC has been on since last fully charged and once it exceeds the setting in CF74, the battery charge indicator blinks. Quite a useful feature, you just need to decide what to put as CF74. I have just done about 35 hours without a ...

No need to charge if not using for a few months. No answer for your questions though.

It certainly will not warn you. I have never seen any dive computer that will do this, although one may exist.

Jack, that is how it is supposed to work. If you want to see the other stops, you use the menu buttons to navigate to it.

They loaded without intervent for me.

I can answer 2. TTS is how many minutes from now till you can surface if you decide to start your ascent now. It takes into account the ascent rate from current depth and any decompression required. FutureTTS is a similar thing, but calculated if you stay at the same depth for x more minutes. For ex...

Nice. The English page for OSTC 2 additional information is in German and also refers to OSTC 3 as being part of what you buy.

It seems that once you download you need to right click and select program to unzip (eg Win 7-Zip) as double clicking does not work like it normally would be expected to.

Updated successfully.