Search found 4324 matches
- Tuesday 24. October 2023, 11:02
- Forum: OSTC Mk.2, 2N and 2C
- Topic: New 3.16 Firmware
- Replies: 0
- Views: 39499
New 3.16 Firmware
Hello, Today, we released the 3.16 stable for the USB-OSTC2 Series (2N/Mk.2/2C). Changes since 3.00 (Changes since 3.13) : BUGFIX: Vertical speed display NEW: Allow to set date > 31.12.2020 BUGFIX: Small language fixes CHANGE: Debug mode disabled (Hard-coded) NEW: Logbook shows markers with small or...
- Wednesday 18. October 2023, 16:16
- Forum: OSTC Mk.2, 2N and 2C
- Topic: OSTN 2n Comms issues
- Replies: 6
- Views: 33276
Re: OSTN 2n Comms issues
Hi,
Is this an OSTC 2N (With a USB port on the side)?
regards,
Matthias
Is this an OSTC 2N (With a USB port on the side)?
regards,
Matthias
- Monday 9. October 2023, 16:56
- Forum: OSTC3, cR, sport and 2
- Topic: Safety stop on OSTC 2 firmware 10.75
- Replies: 3
- Views: 16216
Re: Safety stop on OSTC 2 firmware 10.75
It was posted before, but the safety stop in hwOS (the firmware for all "small" OSTC) works as follows: - The dive must have been deeper than 10m and lasted longer than 1min. - When surfacing, there must be no deco commitment at 10m depth - A countdown of 3min is then displayed (to the sec...
- Monday 9. October 2023, 09:39
- Forum: OSTC3, cR, sport and 2
- Topic: Silicon sleeve
- Replies: 37
- Views: 127998
Re: Silicon sleeve
Thanks! Looks very nice.Acorchia wrote: ↑Sunday 8. October 2023, 21:25 If any one is interested I build a hard cover for OSTC 2 to print.
https://www.thingiverse.com/thing:6255991
Regards,
Matthias
- Tuesday 3. October 2023, 15:42
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC Sport - Unable to connect on Bluetooth for Firmware Upgrade
- Replies: 13
- Views: 41388
Re: OSTC Sport - Unable to connect on Bluetooth for Firmware Upgrade
In the new OSTC+, there is an option "Reset Bluetooth" in the reset menu. This will un-pair any devices from the OSTC+ and usually does the trick if you have issues. Also, the OSTC+ Bluetooth may not work with a (low quaility) 1,5V battery. The recommended 3,6V rechargeable LiIon battery o...
- Monday 25. September 2023, 10:54
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.5 with RTE 3.20
- Replies: 12
- Views: 53549
Re: hwOS4: New Firmware 1.6.5 with RTE 3.20
Hi,
We have updated this thread with the 1.6.5. This fixes the "Big Font" issue in the SYS2 menu.
Regards,
Matthias
We have updated this thread with the 1.6.5. This fixes the "Big Font" issue in the SYS2 menu.
Regards,
Matthias
- Wednesday 20. September 2023, 10:48
- Forum: OSTC3, cR, sport and 2
- Topic: Surface pressure compensation
- Replies: 6
- Views: 14920
Re: Surface pressure compensation
Hello,
The OSTC+ will use the surface pressure reading for the 0m reference. So, some hPa more or less will NOT affect your depth reading and this is not critical. A defective pressure sensor will show (intentionally) 9999hPa on the surface.
regards,
Matthias
The OSTC+ will use the surface pressure reading for the 0m reference. So, some hPa more or less will NOT affect your depth reading and this is not critical. A defective pressure sensor will show (intentionally) 9999hPa on the surface.
regards,
Matthias
- Wednesday 20. September 2023, 10:42
- Forum: OSTC3, cR, sport and 2
- Topic: Frage zur TTS
- Replies: 4
- Views: 12799
Re: Frage zur TTS
Hallo,
wenn das Dekogas als "Deco" konfiguriert ist UND eine Wechseltiefe eingestellt ist, wird es in die TTS einbezogen (Bis zu 5 Gase gleichzeitig). Zudem wird Dir dann auf der Wechseltiefe auch der Gaswechsel durch gelbes Blinken des aktiven Gases der Wechsel empfohlen.
Gruß,
Matthias
wenn das Dekogas als "Deco" konfiguriert ist UND eine Wechseltiefe eingestellt ist, wird es in die TTS einbezogen (Bis zu 5 Gase gleichzeitig). Zudem wird Dir dann auf der Wechseltiefe auch der Gaswechsel durch gelbes Blinken des aktiven Gases der Wechsel empfohlen.
Gruß,
Matthias
- Wednesday 20. September 2023, 10:40
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC PLUS Battery problems
- Replies: 2
- Views: 11655
Re: OSTC PLUS Battery problems
Hello,
Either the battery leaked or you had some water inside the battery compartment. In either way, we need to service the unit at our place (New battery contact, new battery cap, new battery). Please contact us via info@heinrichsweikamp.com in this case.
regards,
Matthias
Either the battery leaked or you had some water inside the battery compartment. In either way, we need to service the unit at our place (New battery contact, new battery cap, new battery). Please contact us via info@heinrichsweikamp.com in this case.
regards,
Matthias
- Tuesday 19. September 2023, 12:48
- Forum: OSTC3, cR, sport and 2
- Topic: FAQ: Batteries in the OSTC plus
- Replies: 1
- Views: 33512
Re: FAQ: Batteries in the OSTC plus
Neuere OSTC+ (So ab 2022) wurden von uns mit einem Akku ausgeliefert, welcher auch über ein Mikro-USB Buchse geladen werden kann. Damit kann man den Akku auch ohne den Qi-Lader aufladen, falls dieser entladen sein sollte und sich nicht über das Ladepad laden lässt. Newer OSTC+ (So from 2022) were su...
- Saturday 16. September 2023, 19:39
- Forum: OSTC 4
- Topic: OSTC Tools for Windows - HWOS Config for Android
- Replies: 48
- Views: 318983
Re: OSTC Tools for Windows - HWOS Config for Android
Hallo, Ihr könnt folgendes probieren: Menu -> SYS2 -> Reset Menu -> Reboot Firmware Dann _sofort_ (Noch bevor das logo erscheint) dreimal kräftig auf die rechte Taste drücken. Es erscheint ein Bildschirm wie angehängt. Aus diesem Modus kannst man das Update nochmal per App starten. Wir nutzen die Ap...
- Thursday 14. September 2023, 14:01
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.2 with RTE 3.10
- Replies: 13
- Views: 42986
Re: hwOS4: New Firmware 1.6.2 with RTE 3.10
Continue here: viewtopic.php?t=22469
- Thursday 14. September 2023, 14:01
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.5 with RTE 3.20
- Replies: 12
- Views: 53549
hwOS4: New Firmware 1.6.5 with RTE 3.20
ENGLISH below. Hallo, Die neue Firmware 1.6.5 ist nun veröffentlicht. heinrichsweikamp.com Anleitung zur Installation: https://forum.heinrichsweikamp.com/viewtopic.php?f=7&t=19186 (Je nach aktueller Version kann es nötig sein, das Update zweimal zu starten. Der OSTC4 gibt dazu nach dem Update nö...
- Wednesday 13. September 2023, 16:53
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC2 startet nicht mehr
- Replies: 6
- Views: 4069
Re: OSTC2 startet nicht mehr
Hallo,
Da passt Spannung und %-Wert zusammen. Wieviel hat er dann denn jetzt bei einem normal TG verbraucht?
Gruß,
Matthias
Da passt Spannung und %-Wert zusammen. Wieviel hat er dann denn jetzt bei einem normal TG verbraucht?
Gruß,
Matthias
- Wednesday 13. September 2023, 08:34
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC2 startet nicht mehr
- Replies: 6
- Views: 4069
Re: OSTC2 startet nicht mehr
Top, danke für die Rückmeldung!
Wenn Du im Logbuch schaust, bei dem letzten gespeicherten TG, welche Spannung (V) und welcher %-Wert für die Batterie wurden da abgelegt?
Gruß,
Matthias
Wenn Du im Logbuch schaust, bei dem letzten gespeicherten TG, welche Spannung (V) und welcher %-Wert für die Batterie wurden da abgelegt?
Gruß,
Matthias
- Tuesday 12. September 2023, 18:36
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC2 startet nicht mehr
- Replies: 6
- Views: 4069
Re: OSTC2 startet nicht mehr
Hallo, Es kann sein, dass sich Dein Tauchcomputer im Tiefschlafmodus befindet, weil die Batterie (vor dem Aufladen) leergelaufen ist. Dann wird der Akku von der restlichen Elektronik getrennt, um ihn vor Tiefentladung zu schützen. Das ist ganz bewußt so implementiert um den (mehr oder weniger) fest ...
- Sunday 10. September 2023, 14:35
- Forum: OSTC3, cR, sport and 2
- Topic: Silicon sleeve
- Replies: 37
- Views: 127998
Re: Silicon sleeve
Hallo Colja,
Das gewünschte STEP file habe ich in diesem Thread doch bereits schon gepostet, am 6.3.2020.
Schau mal die älteren Beiträge durch
Gruß,
Matthias
Das gewünschte STEP file habe ich in diesem Thread doch bereits schon gepostet, am 6.3.2020.
Schau mal die älteren Beiträge durch
Gruß,
Matthias
- Friday 8. September 2023, 10:08
- Forum: OSTC 4
- Topic: OSTC4 – besserer Briefbeschwerer?!
- Replies: 5
- Views: 4345
Re: OSTC4 – besserer Briefbeschwerer?!
Das mit der Tastensperre ist neu, ja. Allerdings ist das 1. Standardmäßig deaktiviert und 2., wie wir finden, ziemlich einfach und selbsterklärend gelöst.
Gruß,
Matthias
Gruß,
Matthias
- Wednesday 30. August 2023, 13:07
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC 2 2022 vs 2017
- Replies: 5
- Views: 4925
Re: OSTC 2 2022 vs 2017
Der ist aus 2017 oder 2018.
Gruß,
Matthias
Gruß,
Matthias
- Saturday 26. August 2023, 12:21
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC Sport - Unable to connect on Bluetooth for Firmware Upgrade
- Replies: 13
- Views: 41388
Re: OSTC Sport - Unable to connect on Bluetooth for Firmware Upgrade
Your OSTC sport is from 2014 or earlier and does not support BLE/Bluetooth 4.0
That rules our any of your iOS units (See FAQ for details) and likely your newer MAC Computers. HWOS Config on Android should work, though. Or a Windows PC.
Regards,
Matthias
That rules our any of your iOS units (See FAQ for details) and likely your newer MAC Computers. HWOS Config on Android should work, though. Or a Windows PC.
Regards,
Matthias
- Wednesday 9. August 2023, 09:40
- Forum: OSTC Mk.2, 2N and 2C
- Topic: Read OSTC 2n JSON Backup File
- Replies: 2
- Views: 2779
- Monday 7. August 2023, 16:25
- Forum: OSTC 4
- Topic: 1.5.1 to 1.6.2
- Replies: 2
- Views: 2784
Re: 1.5.1 to 1.6.2
Hi,
Try the update via the OSTC Companion or Subsurface (Desktop) in this case. No need to send you unti for an update
Regards,
Matthias
Try the update via the OSTC Companion or Subsurface (Desktop) in this case. No need to send you unti for an update
Regards,
Matthias
- Tuesday 1. August 2023, 10:08
- Forum: OSTC 4
- Topic: Odd behaviour of "Simulator, Calculate Deco"
- Replies: 1
- Views: 2775
Re: Odd behaviour of "Simulator, Calculate Deco"
Hello,
This is known issue of the 1.6.2 and is already fixed: https://code.heinrichsweikamp.com/publi ... 5f9557c053
We have a new release very soon.
Regards,
Matthias
This is known issue of the 1.6.2 and is already fixed: https://code.heinrichsweikamp.com/publi ... 5f9557c053
We have a new release very soon.
Regards,
Matthias
- Monday 31. July 2023, 17:43
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC Sport Dive Mode Switch-on
- Replies: 11
- Views: 16607
Re: OSTC Sport Dive Mode Switch-on
That's from the old manual (Page 17):
Regards,
Matthias
Regards,
Matthias
- Sunday 30. July 2023, 15:46
- Forum: OSTC3, cR, sport and 2
- Topic: OSTC Sport Dive Mode Switch-on
- Replies: 11
- Views: 16607
Re: OSTC Sport Dive Mode Switch-on
Hi, You have the OSTC 2 in the hwOS Sport version. So use the file v10_76_EN_DE_ostc_sport_firmware.hex for your OSTC. The TECH version can not be installed on your unit and it will stay on the old firmware in this case. You can download the firmware here: https://heinrichsweikamp.com/index.php/serv...