OSTC Bungee Support from Innodive

Legacy OSTC's
Post Reply
heinrichsweikamp
Posts: 4370
Joined: Sunday 13. May 2007, 18:07

OSTC Bungee Support from Innodive

Post by heinrichsweikamp »

Hello,

We're getting more and more inquiries about this OSTC bungee support from Innodive
[img]http://www.innodive.com/store/upload/30 ... Y5qkcm.jpg[/img]

Purchase this directly from Innodive please.

Innodive speaks, reads and writes fluent French and English.

Regards,
Matthias
Innodive

Re: OSTC Bungee Support from Innodive

Post by Innodive »

Hello,

Cover for the new OSTC Mk.II is ready and perfectly fits the new design.

www.innodive.com

[img]http://www.innodive.com/store/upload/08 ... 5JYEvw.jpg[/img]
Raimund

Re: OSTC Bungee Support from Innodive

Post by Raimund »

Hello,

does anyone know where to get bungee support for OSTC Version 1? Innodive doesn't longer sell that.

Many regards,
Raimund

Hallo,

Weiss jemand, wo ich "Bungee Unerstützung" für den OSTC Version 1 herbekommen kann? Innodive verkauft dies nach eigenen Aussagen leider nicht mehr.

Danke & Gruß
Raimund
heinrichsweikamp
Posts: 4370
Joined: Sunday 13. May 2007, 18:07

Re: OSTC Bungee Support from Innodive

Post by heinrichsweikamp »

Hallo Raimund,

Wir haben noch einen über, melde Dich mal bei uns direkt: info@heinrichsweikamp.com

Viele Grüsse,
Matthias
Robert

Re: OSTC Bungee Support from Innodive

Post by Robert »

Hallo Matthias,

habt ihr möglicherweise noch einen "Bungee Support" "über"? :)

Oder hat evtl. sonst jemand eine Idee des Displayschutzes für den OSTC Version1?
Habe es mit Folie probiert, aber die hält nicht wirklich.

Viele Grüsse
Robert
plauzer
Posts: 21
Joined: Wednesday 16. July 2008, 23:39

Re: OSTC Bungee Support from Innodive

Post by plauzer »

nimm d-c-fix folie von konrad hornschuch ag aus dem baumarkt, 5 laufende meter zum preis von 4-5 € sollten ein ganzes taucherleben reichen. liegt bei selbsklebenden dekor-folien im regal. beste grüße falk m.
Steve
Posts: 94
Joined: Wednesday 15. April 2009, 13:09

Re: OSTC Bungee Support from Innodive

Post by Steve »

ich habe ein folie für PDA gebraucht und das geht seht gut
Steve
CMAS 2* Instructor
CMAS Advanced Nitrox Instructor
Belgium
ewatsch
Posts: 29
Joined: Tuesday 6. October 2009, 17:12

Re: OSTC Bungee Support from Innodive

Post by ewatsch »

Has anyone tested the bungee-cover for the Mk.II?

Is it worth buying?
Robert

Re: OSTC Bungee Support from Innodive

Post by Robert »

Danke für die Tipps,
d-c-fix werde ich wohl noch probieren, wusste gar nicht, das es die auch als "Klarsicht" gibt.
PDA/Handy-Folie(n) haben sich, wie gesagt, alle nach kurzer Zeit "verabschiedet":(
Larscousteau
Posts: 8
Joined: Wednesday 11. November 2009, 20:25

Re: OSTC Bungee Support from Innodive

Post by Larscousteau »

I have the bungee-cover for MK2 and i find it very very good
Gizmo
Posts: 13
Joined: Sunday 27. December 2009, 19:11

Re: OSTC Bungee Support from Innodive

Post by Gizmo »

ewatsch Wrote:
-------------------------------------------------------
> Has anyone tested the bungee-cover for the Mk.II?
>
> Is it worth buying?

Depends on how you define 'worth' 25€ (+ postage) is a lot for what it is, i bought it for a bit of protection rather than a way of mounting it, as IMO there is nothing wrong with the OE strap, it will offer some protection (mainly on the front corners so i am happy i bought it.
Would i buy another?... Im not sure, I also think that i have had one from a bad QC batch as the mounting holes (it mounts through the OE pins) were not 'drilled' all the way through, nothing a 2mm drill bit didn't sort, but not something i expect to have to do.
The fit however is perfect.

[img]http://i47.tinypic.com/2hqy0df.jpg[/img]
[img]http://i50.tinypic.com/1zcgwig.jpg[/img]
[img]http://i46.tinypic.com/auwps9.jpg[/img]
[img]http://i45.tinypic.com/zjv0qa.jpg[/img]
[img]http://i48.tinypic.com/1yrhtz.jpg[/img]
[img]http://i45.tinypic.com/1zmi9z4.jpg[/img]

HTH
ewatsch
Posts: 29
Joined: Tuesday 6. October 2009, 17:12

Re: OSTC Bungee Support from Innodive

Post by ewatsch »

Hi Gizmo,

thank you very much for the pictures!

I'm not sure whether to trust only one velcro tape with my precious Mk.II. So I thought about using the additional cover in order to have a 'better feeling' while hovering in the deep blue . . .

ewatsch
Innodive

Re: OSTC Bungee Support from Innodive

Post by Innodive »

Larscousteau Wrote:
-------------------------------------------------------
I also think that i have had one from a bad QC batch as the mounting holes (it mounts through the OE pins) were not 'drilled' all the way through, nothing a 2mm drill bit didn't sort, but not something i expect to have to do.



Hello,

It's not a bad batch. The production technique may leave some powder in the very small holes. Just pass through with a thin screwdriver will remove this powder. Nervertheless, we will check all covers for this issue.

OSTC 1 covers will be available next week again.

Regards

Innodive
jb2cool
Posts: 142
Joined: Tuesday 21. January 2014, 21:19

Re: OSTC Bungee Support from Innodive

Post by jb2cool »

I know it's pretty old now but does anyone know where i can get a new one of these mounts? I have cracked my current one.
jb2cool
Posts: 142
Joined: Tuesday 21. January 2014, 21:19

Re: OSTC Bungee Support from Innodive

Post by jb2cool »

Still looking for one of these cases to replace a broken one I have. Anyone know where I can get one?
Post Reply