hwOS for OSTC3, cR and OSTC 2: 2.10 released
-
- Posts: 4370
- Joined: Sunday 13. May 2007, 18:07
hwOS for OSTC3, cR and OSTC 2: 2.10 released
Hello,
The new OSTC3, cR and OSTC 2 firmware 2.10 is now available for download:
http://heinrichsweikamp.com/service/firmwares
The firmware itself can be set to English, Deutsch, Italiano and Français. The firmware is now split into two language versions: English + German and French + Italian. Make sure to install the correct HEX file.
Die Firmware selbst kann auf Englisch, Deutsch, Italienisch und Französisch gestellt werden. Die Firmware ist nun auf zwei Versionen geplittet (Englisch + Deutsch sowie Französisch und Italienisch), achtet darauf die richtige HEX Datei zu installieren.
Changes/Änderungen:
[2.10]
NEW: Adjustable timeout for Divemode
CHANGE: Firmware now split in two variants (EN/DE) and (FR/IT)
NEW: New battery option for AA 3,7V rechargable (For OSTC 3)
NEW: Show Uptime (Time since last firmware boot) in information menu
NEW: Store more battery info into logbook memory
BUGFIX: Minor text alignment fixes
Details on hwOS: http://heinrichsweikamp.com/hw-os
Regards,
Matthias
The new OSTC3, cR and OSTC 2 firmware 2.10 is now available for download:
http://heinrichsweikamp.com/service/firmwares
The firmware itself can be set to English, Deutsch, Italiano and Français. The firmware is now split into two language versions: English + German and French + Italian. Make sure to install the correct HEX file.
Die Firmware selbst kann auf Englisch, Deutsch, Italienisch und Französisch gestellt werden. Die Firmware ist nun auf zwei Versionen geplittet (Englisch + Deutsch sowie Französisch und Italienisch), achtet darauf die richtige HEX Datei zu installieren.
Changes/Änderungen:
[2.10]
NEW: Adjustable timeout for Divemode
CHANGE: Firmware now split in two variants (EN/DE) and (FR/IT)
NEW: New battery option for AA 3,7V rechargable (For OSTC 3)
NEW: Show Uptime (Time since last firmware boot) in information menu
NEW: Store more battery info into logbook memory
BUGFIX: Minor text alignment fixes
Details on hwOS: http://heinrichsweikamp.com/hw-os
Regards,
Matthias
-
- Posts: 17
- Joined: Monday 8. October 2012, 21:22
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
Bonjour,
J'ai installé le fichier 210 fr/it : il n'y a pas de français !
J'ai tenté en installant le fichier 210 de/en : il n'y a pas de français non plus !
A l'aide !!!
J'ai installé le fichier 210 fr/it : il n'y a pas de français !
J'ai tenté en installant le fichier 210 de/en : il n'y a pas de français non plus !
A l'aide !!!
OSTC 2N, OSTC 2C, OSTC 2NE, OSTC 2, OSTC 2 new #16933
-
- Posts: 4370
- Joined: Sunday 13. May 2007, 18:07
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
Bonjour,
Please try downloading the firmware again. There was an old zip archive in which the French version was missing. I just checked the links again, should be fine now.
regards,
Matthias
Please try downloading the firmware again. There was an old zip archive in which the French version was missing. I just checked the links again, should be fine now.
regards,
Matthias
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
Small problem. Once updated, my OSTC3 was reading 0% battery. Before the upgrade, the battery was at 42%. Voltage is reading 3.4V.
I'm using a SAFT battery. I tried pulling the battery out and reinserting, selecting 'Keep Old', but it still showed 0%.
I tried again, selecting new 3.6V and it is now showing 100% - however I know it is not really 100%.
I tried a third time, selecting 'Keep Old', and it is now showing 0% again.
I'm using a SAFT battery. I tried pulling the battery out and reinserting, selecting 'Keep Old', but it still showed 0%.
I tried again, selecting new 3.6V and it is now showing 100% - however I know it is not really 100%.
I tried a third time, selecting 'Keep Old', and it is now showing 0% again.
-
- Posts: 17
- Joined: Monday 8. October 2012, 21:22
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
Bonsoir Matthias,
ça marche, mon OSTC2 est enfin revenu en français. Parfait, merci.
Cordialement.
ça marche, mon OSTC2 est enfin revenu en français. Parfait, merci.
Cordialement.
OSTC 2N, OSTC 2C, OSTC 2NE, OSTC 2, OSTC 2 new #16933
-
- Posts: 4370
- Joined: Sunday 13. May 2007, 18:07
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
sharpw Wrote:
-------------------------------------------------------
> Small problem. Once updated, my OSTC3 was reading
> 0% battery. Before the upgrade, the battery was at
> 42%. Voltage is reading 3.4V.
From which version did you upgrade from?
Regards,
Matthias
-------------------------------------------------------
> Small problem. Once updated, my OSTC3 was reading
> 0% battery. Before the upgrade, the battery was at
> 42%. Voltage is reading 3.4V.
From which version did you upgrade from?
Regards,
Matthias
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
heinrichsweikamp Wrote:
-------------------------------------------------------
> sharpw Wrote:
> --------------------------------------------------
> -----
> > Small problem. Once updated, my OSTC3 was
> reading
> > 0% battery. Before the upgrade, the battery was
> at
> > 42%. Voltage is reading 3.4V.
>
> From which version did you upgrade from?
>
> Regards,
> Matthias
2.09
-------------------------------------------------------
> sharpw Wrote:
> --------------------------------------------------
> -----
> > Small problem. Once updated, my OSTC3 was
> reading
> > 0% battery. Before the upgrade, the battery was
> at
> > 42%. Voltage is reading 3.4V.
>
> From which version did you upgrade from?
>
> Regards,
> Matthias
2.09
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
same problem when updating from 2.07 - batt 0%, before 88%
gruss
fredy
gruss
fredy
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
Matthias,
Another thing - when you put a new battery in the OSTC3, the usual menu comes up to give options for batteries. One of the options is 'Internal 18650'. Is that supposed to be an 18650 or 14500?
With Regards
Another thing - when you put a new battery in the OSTC3, the usual menu comes up to give options for batteries. One of the options is 'Internal 18650'. Is that supposed to be an 18650 or 14500?
With Regards
-
- Posts: 4370
- Joined: Sunday 13. May 2007, 18:07
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
No, 18650 is the internal battery of the OSTC 2 and cR.
Regards,
Matthias
Regards,
Matthias
-
- Posts: 4
- Joined: Tuesday 19. March 2013, 18:44
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
Hallo zusammen,
Gibt es eine Möglichkeit die Firmware für meinen OStC 2 in Verbindung mit einem IPad zu aktualisieren oder ist dies nur in Verbindung mit einem PC möglich ?
Vielen Dank im voraus und allzeit gut Luft !
Viele Grüße
Josef :S
Gibt es eine Möglichkeit die Firmware für meinen OStC 2 in Verbindung mit einem IPad zu aktualisieren oder ist dies nur in Verbindung mit einem PC möglich ?
Vielen Dank im voraus und allzeit gut Luft !
Viele Grüße
Josef :S
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
Hi
Im also having a problem withe the battery % having on to zero the voltage shown is the same as before the upgrade to 2.10
Im also having a problem withe the battery % having on to zero the voltage shown is the same as before the upgrade to 2.10
-
- Posts: 4370
- Joined: Sunday 13. May 2007, 18:07
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
Choose "Use old" from the New Battery Menu manually. Menu -> Settings -> More -> Reset menu
Regards,
Matthias
Regards,
Matthias
-
- Posts: 4370
- Joined: Sunday 13. May 2007, 18:07
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
robin hood Wrote:
-------------------------------------------------------
> Gibt es eine Möglichkeit die Firmware für meinen
> OStC 2 in Verbindung mit einem IPad zu
> aktualisieren oder ist dies nur in Verbindung mit
> einem PC möglich ?
Das ist (aktuell) noch nicht möglich. Das ist aber ein Thema für uns...
Gruß,
Matthias
-------------------------------------------------------
> Gibt es eine Möglichkeit die Firmware für meinen
> OStC 2 in Verbindung mit einem IPad zu
> aktualisieren oder ist dies nur in Verbindung mit
> einem PC möglich ?
Das ist (aktuell) noch nicht möglich. Das ist aber ein Thema für uns...
Gruß,
Matthias
-
- Posts: 4370
- Joined: Sunday 13. May 2007, 18:07
Re: hwOS for OSTC3, cR and OSTC 2: 2.10 released
Continue here: read.php?6,17586