I have just updated to the latest stable (3.11) and was pleased to see the AutoSP functionality, and tried this on the simulator - switches on the descent but not back on the way back to the surface, is this the intended functionality?
My CCR (Inspiration) switches both ways? Guess this would mean a minimum and maximum depth? 0 - 15m 0.7, 15-99m 1.3 for instance
Chris
AutoSP switch
AutoSP switch
---------------------------------
Chris Parsons
OSTC 2n #2516
Chris Parsons
OSTC 2n #2516
-
- Posts: 4376
- Joined: Sunday 13. May 2007, 18:07
Re: AutoSP switch
cparsons Wrote:
-------------------------------------------------------
> I have just updated to the latest stable (3.11)
> and was pleased to see the AutoSP functionality,
> and tried this on the simulator - switches on the
> descent but not back on the way back to the
> surface, is this the intended functionality?
Yes. Switching back on the way up is not intend currently.
regards,
Matthias
-------------------------------------------------------
> I have just updated to the latest stable (3.11)
> and was pleased to see the AutoSP functionality,
> and tried this on the simulator - switches on the
> descent but not back on the way back to the
> surface, is this the intended functionality?
Yes. Switching back on the way up is not intend currently.
regards,
Matthias
Re: AutoSP switch
I have a query about auto SP switch. Until I updated to this version I ran it with a fixed set point of 1.23 compared to 1.25 on a VR3 and 1.3 on my rebreather. I like this value as it allowed for the fact that I am unlikely to be at 1.3 throughout the bottom part of the dive (lets just say it is at 1.27) and at the start (descent) it is at 0.7.
I have just been playing with the auto set point settings but have not yet changed SP#1 as I am happy with it at 1.23 but have noticed that SP#2 and 3 can only be set in multiples of 0.1. I would like to set to 0.7 and 1.25 with an auto switch but can't. If I change SP#1 will I ever be able to get it back to 1.23?
I have just been playing with the auto set point settings but have not yet changed SP#1 as I am happy with it at 1.23 but have noticed that SP#2 and 3 can only be set in multiples of 0.1. I would like to set to 0.7 and 1.25 with an auto switch but can't. If I change SP#1 will I ever be able to get it back to 1.23?
-
- Posts: 4376
- Joined: Sunday 13. May 2007, 18:07
Re: AutoSP switch
Hi,
SP are adjustable in 0.1bar steps only, sorry.
OSTC Tools: read.php?2,17011 allows change in 0.01bar.
Regards,
Matthias
SP are adjustable in 0.1bar steps only, sorry.
OSTC Tools: read.php?2,17011 allows change in 0.01bar.
Regards,
Matthias