Issue with mV Cell reading in 1.28
Posted: Thursday 26. February 2009, 16:40
Hello,
Today, we got information (and can confirm this) from an OSTC user that calling the mV readings (O2 Monitor board) in the divemode menu during a real dive (Or with the on-board simulator) WITHOUT the board attached freezes the OSTC output.
Solution: Install the fixed 1.29: http://www.heinrichsweikamp.net/ostc/en ... 9481F7.htm
While this has no effects for normal use, this can be a serious problem when playing around with the OSTC in the deco, for example.
We're sorry for the trouble, this particular menu was only tested from us in PC simulator mode...
Regards,
Matthias
Today, we got information (and can confirm this) from an OSTC user that calling the mV readings (O2 Monitor board) in the divemode menu during a real dive (Or with the on-board simulator) WITHOUT the board attached freezes the OSTC output.
Solution: Install the fixed 1.29: http://www.heinrichsweikamp.net/ostc/en ... 9481F7.htm
While this has no effects for normal use, this can be a serious problem when playing around with the OSTC in the deco, for example.
We're sorry for the trouble, this particular menu was only tested from us in PC simulator mode...
Regards,
Matthias