forum.heinrichsweikamp.com

Hi!
I have clone of OSTC 2N computer (seawooch). Trying to download logs on my Samsung Galaxy Tab 10.1 (android 4.0.4). But unsuccessfully .
Yesterday, I download all my logs from Galileo Sol via IR adapter.
Divemate say : "Please connect the USB host cable and USB interfase to this device. Then switch the dive computer to PC mode."
When I press "Start transfer", it say: Error.... set the dive computer in PC mode...
Where is PC mode?

[IMG]http://s019.radikal.ru/i637/1306/c4/8d4939160177.jpg[/IMG]

[IMG]http://s017.radikal.ru/i413/1306/a1/61f6685acb76.jpg[/IMG]
Thank you.

Ask the manufacturer - we don't give support for OSTC "clones" here.

Matthias

Are you sure that Android can handle this kind of USB-Connections? I don't believe so, so i'm surprised that you can use an IRda-Device to transfer data...

heinrichsweikamp Wrote:
-------------------------------------------------------
> Ask the manufacturer - we don't give support for
> OSTC "clones" here.
>
> Matthias

Thank you, Matthias.
But, I hope that the same software have the same problems.
What they mean when ask to swith computer to PC mode?
Thank you, again.
I understand you.



scubatinoo Wrote:
-------------------------------------------------------
> Are you sure that Android can handle this kind of
> USB-Connections? I don't believe so, so i'm
> surprised that you can use an IRda-Device to
> transfer data...

Yes. I'm absolutely sure.B)-
On screenshots you can see, parts of my dives that I download 2 days ago via IRDA.
http://www.youtube.com/watch?v=ici7hcAYLEA
Many years I use my Palm Treo to download logs from my divecomputers, but now I use Android smartphones with usb host inside, like Galaxy Tab and Galaxy Note-1
Dmitry.

Dikon Wrote:
> But, I hope that the same software have the same
> problems.

This isn't a software problem.

Regards,
Matthias

Dikon Wrote:
-------------------------------------------------------
> ...
> On screenshots you can see, parts of my dives that
> I download 2 days ago via IRDA.

Yes but an IRDA-Device is a typical Input-Device,
with a very low power consumption... But a Device
like an OSTC will be charged over USB. So my opinion
is that the Android device will block the USB connection
unless it is plugged to a PC where the Tablet can get
power over USB... This is how i understand "PC mode".

You should buy a Windows 8 tablet (not RT!), this will
work. Have a look here: read.php?2,11262

scubatinoo Wrote:
-------------------------------------------------------
> Yes but an IRDA-Device is a typical Input-Device,
>
> with a very low power consumption... But a Device
> like an OSTC will be charged over USB. So my
> opinion
> is that the Android device will block the USB
> connection
> unless it is plugged to a PC where the Tablet can
> get
> power over USB... This is how i understand "PC
> mode".
>
> You should buy a Windows 8 tablet (not RT!), this
> will
> work. Have a look here:
> read.php?2,11262

Thank you for you attention!
I think you are right!
I want to try the Y cable with external power.
I have only one question: If there anybody download logs from original ostc 2n to Divemate (Android) via usb wire?
It's my goal, to use android smartphone to download logs,because all my Win smartphones was a "Holiday, which always with you"
Problem in that: I don't have enough time for holidays (:D

Maybe you just need to buy / install the USB-Pack from DiveMate. Have a look here:
http://www.confitek.de/en/products/DiveMate/prices.php

Anyway, is someone else using OTSC with android devices with success?

scubatinoo Wrote:
-------------------------------------------------------
> Maybe you just need to buy / install the USB-Pack
> from DiveMate. Have a look here:
> http://www.confitek.de/en/products/DiveMate/prices
> .php
>
> Anyway, is someone else using OTSC with android
> devices with success?
I have all three packages from DiveMate, and I have firmware 2.70 from OTSC
Tomorrow, I want to try additional 5 v the adapter.

heinrichsweikamp Wrote:
-------------------------------------------------------
> Ask the manufacturer - we don't give support for
> OSTC "clones" here.
>
> Matthias

Most of all problem that DiveMate don't support our "clone" - we are using different USB/UART IC:
Original OSTC: FT232R USB Interface Chip
Seawooch "clone": CP2102 (Silicon Labs.)

As I think you could ask developer of the DiveMate to add driver for this IC into s/w too.

heinrichsweikamp Wrote:
-------------------------------------------------------
> Ask the manufacturer - we don't give support for
> OSTC "clones" here.

Discuss this somewhere else, please.

Matthias