OSTC3 - Info MOD & pO2 Max
- ClaudeDive
- Posts: 206
- Joined: Friday 27. September 2013, 12:50
OSTC3 - Info MOD & pO2 Max
Hi Matthias,
[left][/left]
Would it be possible to add the info "MOD" of the gas used on display dive mode and simulation mode as in the example attached photo,
[left][/left]
The information "MOD" could appear on all pages of these two modes "dive" and "Simulation"
[left][/left]
[img]file.php?6,file=538,filename=OSTC3_-_MOD.jpg[/img]
[left][/left]
Thanks for your answer,
[left][/left]
Regards,
[left][/left]
[left][/left]
Would it be possible to add the info "MOD" of the gas used on display dive mode and simulation mode as in the example attached photo,
[left][/left]
The information "MOD" could appear on all pages of these two modes "dive" and "Simulation"
[left][/left]
[img]file.php?6,file=538,filename=OSTC3_-_MOD.jpg[/img]
[left][/left]
Thanks for your answer,
[left][/left]
Regards,
[left][/left]
Cheers
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
-
- Posts: 4376
- Joined: Sunday 13. May 2007, 18:07
Re: OSTC3 - Info MOD
ClaudeDive Wrote:
-------------------------------------------------------
> Would it be possible to add the info "MOD" of the
> gas used on display dive mode and simulation mode
> as in the example attached photo,
As with most of your proposals, yes: Yes, this would be possible. But we don't start coding all your requests at once, sorry.
Regards,
Matthias
-------------------------------------------------------
> Would it be possible to add the info "MOD" of the
> gas used on display dive mode and simulation mode
> as in the example attached photo,
As with most of your proposals, yes: Yes, this would be possible. But we don't start coding all your requests at once, sorry.
Regards,
Matthias
- ClaudeDive
- Posts: 206
- Joined: Friday 27. September 2013, 12:50
Re: OSTC3 - Info MOD
Hi Matthias,
[left][/left]
As for my other applications, I think simple to achieve including "Info Type of gas" - "MOD" - "Blue color for inactif aGF" and "Low Battery signal", I hoped an answer to the technical proposals for ameliorations for your customers and users of your OSTC3, possibly with a period of application and your priorities but that it could have been also a refusal with your justifications, but not an answer that is not one.
[left][/left]
I thought the technical proposals for ameliorations was a main element and a vocation of your Forum, sorry.
[left][/left]
Regards,
[left][/left]
[left][/left]
As for my other applications, I think simple to achieve including "Info Type of gas" - "MOD" - "Blue color for inactif aGF" and "Low Battery signal", I hoped an answer to the technical proposals for ameliorations for your customers and users of your OSTC3, possibly with a period of application and your priorities but that it could have been also a refusal with your justifications, but not an answer that is not one.
[left][/left]
I thought the technical proposals for ameliorations was a main element and a vocation of your Forum, sorry.
[left][/left]
Regards,
[left][/left]
Cheers
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
-
- Posts: 666
- Joined: Sunday 1. January 2012, 22:41
Re: OSTC3 - Info MOD
ClaudeDive Wrote:
-------------------------------------------------------
> Would it be possible to add the info "MOD" of the
> gas used on display dive mode and simulation mode
> as in the example attached photo,
Serious divers know the MOD's of the common gases, write
it on the tanks and stick to their diveplan. Sorry but i
see no need for this kind of information on the display.
It's usefull to doublecheck when you configure the gases.
-------------------------------------------------------
> Would it be possible to add the info "MOD" of the
> gas used on display dive mode and simulation mode
> as in the example attached photo,
Serious divers know the MOD's of the common gases, write
it on the tanks and stick to their diveplan. Sorry but i
see no need for this kind of information on the display.
It's usefull to doublecheck when you configure the gases.
regards,
scubatinoo
> OSTC 2N 3705 & OSTC 2 18807 <
scubatinoo
> OSTC 2N 3705 & OSTC 2 18807 <
- ClaudeDive
- Posts: 206
- Joined: Friday 27. September 2013, 12:50
Re: OSTC3 - Info MOD
Hi Scubatinoo,
[left][/left]
Sorry but I see no more need to have informations " EAD / END " on the screen during diving
[left][/left]
The Sérious divers know the gases MOD's in their tanks but would like also the safety recall of the MOD of these gases on the screen Elevated much more easy to read and useful than " EAD / END " during diving.
[left][/left]
" MOD " also can help to doublecheck the gas used with the same display on the computer and on the tank,
[left][/left]
This does not prevent you to doublecheck all your parameters when you configure your gases and also stick to your diveplan.
[left][/left]
Regards,
[left][/left]
[left][/left]
Sorry but I see no more need to have informations " EAD / END " on the screen during diving
[left][/left]
The Sérious divers know the gases MOD's in their tanks but would like also the safety recall of the MOD of these gases on the screen Elevated much more easy to read and useful than " EAD / END " during diving.
[left][/left]
" MOD " also can help to doublecheck the gas used with the same display on the computer and on the tank,
[left][/left]
This does not prevent you to doublecheck all your parameters when you configure your gases and also stick to your diveplan.
[left][/left]
Regards,
[left][/left]
Cheers
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
Re: OSTC3 - Info MOD
Hi Matthias,
heinrichsweikamp Wrote:
-------------------------------------------------------
> As with most of your proposals, yes: Yes, this
> would be possible.
So you ar going to save the max ppO2 for each gas in the gaslist?
If not, the mod is useless becausse the mod of a decogas belongs to another ppO2 than the mod of a bottom-gas.
Regards
Rob
heinrichsweikamp Wrote:
-------------------------------------------------------
> As with most of your proposals, yes: Yes, this
> would be possible.
So you ar going to save the max ppO2 for each gas in the gaslist?
If not, the mod is useless becausse the mod of a decogas belongs to another ppO2 than the mod of a bottom-gas.
Regards
Rob
Home: http://www.angermayr.eu
email: ostctools@angermayr.eu
Home of OSTC Tools: http://ostctools.angermayr.eu
HWOSConfig for Android: https://play.google.com/store/apps/details?id=eu.angermayr.hwosconfig
email: ostctools@angermayr.eu
Home of OSTC Tools: http://ostctools.angermayr.eu
HWOSConfig for Android: https://play.google.com/store/apps/details?id=eu.angermayr.hwosconfig
- ClaudeDive
- Posts: 206
- Joined: Friday 27. September 2013, 12:50
Re: OSTC3 - Info MOD & pO2 Max
hi Matthias,
[left][/left]
On screen display "Deco Mode", we could have two settings pO2 max:
[left][/left]
A setting for "Bottom Gas" with pO2 = 1.4 for example,
[left][/left]
A setting for "Deco gas" and "Travel Gas" with pO2 = 1.6 for example,
[left][/left]
This would avoid having to adjust the pO2 for each gas,
[left][/left]
The MOD will be calculate automatically with the selection "Gas Type": "Travel" - "Bottom" and "Deco".
[left][/left]
Regards,
[left][/left]
[left][/left]
On screen display "Deco Mode", we could have two settings pO2 max:
[left][/left]
A setting for "Bottom Gas" with pO2 = 1.4 for example,
[left][/left]
A setting for "Deco gas" and "Travel Gas" with pO2 = 1.6 for example,
[left][/left]
This would avoid having to adjust the pO2 for each gas,
[left][/left]
The MOD will be calculate automatically with the selection "Gas Type": "Travel" - "Bottom" and "Deco".
[left][/left]
Regards,
[left][/left]
Cheers
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
-
- Posts: 4376
- Joined: Sunday 13. May 2007, 18:07
Re: OSTC3 - Info MOD
I use 1.6bar for the bottom gas sometimes.
Regards,
Matthias
Regards,
Matthias
- ClaudeDive
- Posts: 206
- Joined: Friday 27. September 2013, 12:50
Re: OSTC3 - Info MOD & pO2 Max
Hi Matthias,
[left][/left]
No problem! as you know pO2 Max are adjustable from 1.2 to 1.6 bar.
[left][/left]
You set so the value that suits you,
[left][/left]
"MOD" above gas used is calculated on 1.6 bar like the value written on the bottle of gas.
[left][/left]
Regards,
[left][/left]
[img]file.php?6,file=544,filename=OSTC3_-_MOD_pO2_Max.jpg[/img]
[left][/left]
No problem! as you know pO2 Max are adjustable from 1.2 to 1.6 bar.
[left][/left]
You set so the value that suits you,
[left][/left]
"MOD" above gas used is calculated on 1.6 bar like the value written on the bottle of gas.
[left][/left]
Regards,
[left][/left]
[img]file.php?6,file=544,filename=OSTC3_-_MOD_pO2_Max.jpg[/img]
Cheers
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
- ClaudeDive
- Posts: 206
- Joined: Friday 27. September 2013, 12:50
Re: OSTC3 - Info MOD & pO2 Max
Hi Matthias,
[left][/left]
Following a further request of this feature, ("PpO2 gaz bas max vs gaz de déco" > Ludo - August 21, 2014 18:00)
[left][/left]
Matthias, it would be great to do,
[left][/left]
Regards,
[left][/left]
[left][/left]
Following a further request of this feature, ("PpO2 gaz bas max vs gaz de déco" > Ludo - August 21, 2014 18:00)
[left][/left]
Matthias, it would be great to do,
[left][/left]
Regards,
[left][/left]
Cheers
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><
ClaudeDive ><)))))°> OSTC3 #2430 <°(((((><