Page 2 of 2
Re: Silicon sleeve
Posted: Sunday 8. March 2020, 18:40
by mail2dirk
Re: Silicon sleeve
Posted: Sunday 8. March 2020, 22:10
by dadefay
Hello,
A friend of mine has an older OSTC 3+ (#4806, 2016, Bluetooth), is this sleeve compatible ? What are the mechanical / dimentionnal differences between OSTC 3+ 2016 and 2019 OSTC Sport 2019 ?
Best regards.
Silicon sleeve
Posted: Sunday 25. December 2022, 20:48
by Lidas123
Hello
i have an ostc2 computer i would like to make the cover, i also have the 3d printer, i would like to print the cover, have any of you made the design of the cover, thanks
Re: Silicon sleeve
Posted: Thursday 16. February 2023, 09:08
by ThK79
delyan.dilkov wrote: ↑Sunday 29. April 2018, 07:34
Hi there.
I also checked @ innodive and you cannot get it separately.
You can make an outer shell with a 3D printer as I did for my OSTC Plus. If you are interested I could try and send you some photos of it.
Regards.
It is possible to get the .STL File of the OTSC Plus Cover?
Did you have printed it "in/with" TPU?
Re: Silicon sleeve
Posted: Sunday 19. February 2023, 16:19
by mail2dirk
Re: Silicon sleeve
Posted: Sunday 5. March 2023, 18:46
by kugelfisch01
Hallo,
gibt es denn die Möglichkeit die CAD-Dateien vom Sport Modell zu bekommen? Würde mir gerne ne Hülle für meine beiden TC entwerfen und drucken.
Wäre cool wenn das ginge und würde mir Arbeit sparen.
Gruß
Felix
Re: Silicon sleeve
Posted: Tuesday 5. September 2023, 18:19
by Colja
heinrichsweikamp wrote: ↑Friday 11. May 2018, 13:06
> can you also share the files for the OSTC 2 from
> 2015?
Here you go.
Regards,
Matthias
Hallo zusammen!
Ich bin auch gerade dabei, mir eine Hülle für meinen OSTC 2 (ab 2017) zu konstruieren.
Den genau zu vermessen, ist ja nicht das Problem, aber mit einer STL oder STEP vom OSTC 2 könnte ich mir Sicherheit eine perfekt sitzende Hülle drucken.
Hat schon jemand eine der Dateien?
Wäre es möglich, diese zu teilen?
Mit besten Grüßen!
Re: Silicon sleeve
Posted: Sunday 10. September 2023, 14:35
by heinrichsweikamp
Hallo Colja,
Das gewünschte STEP file habe ich in diesem Thread doch bereits schon gepostet, am 6.3.2020.
Schau mal die älteren Beiträge durch
Gruß,
Matthias
Re: Silicon sleeve
Posted: Monday 11. September 2023, 18:19
by Colja
Tatsächlich!
Entschuldige bitte! Der Post ist mir irgendwie durch die Lappen gegangen.
Trotzdem vielen Dank!
Re: Silicon sleeve
Posted: Monday 11. September 2023, 18:56
by frogman-x
That should definitely be mentioned again here and I can conirm that the sleeves are perfect!
Re: Silicon sleeve
Posted: Sunday 8. October 2023, 21:25
by Acorchia
If any one is interested I build a hard cover for OSTC 2 to print.
https://www.thingiverse.com/thing:6255991
Re: Silicon sleeve
Posted: Monday 9. October 2023, 09:39
by heinrichsweikamp
Thanks! Looks very nice.
Regards,
Matthias
Re: Silicon sleeve
Posted: Monday 13. November 2023, 12:30
by Acorchia
Another Cover for the New version of OSTC +
https://www.thingiverse.com/thing:6303028
print it in TPU it fit well.