forum.heinrichsweikamp.com

Hi all
I'm curently diving an ap classic with two old controllers and last year I added the OSTC CR connected to all three cells via a cable split from narked@90. I find myself not using the old ap controllers any more, just to power up the unit and change setpoints. Recently I started cave/mine diving with the unit and I am wondering how the new HUD can be connected to my unit? I have read that it's powered up by the existent OSTC CR. Any more information will be appreciated.
Thanks
Cristian

Hi,

Attaching the S8 HUD requires a few steps:

- Connect HUD with fixed S8-Connector to OSTC cR
- Install 8-way master cable from the HUD electronics to the head
- Install sensors to 4 of the 8 wires in the master cable
- Install HUD module (The thing on the mouthpiece) to the head (Second cable gland required)
- Install digital communications between the HUD module and the HUD electronics with the remaining 4 wires in the master cable

Configuration and power supply is through the OSTC cR then.

regards,
Matthias

Thanks Matthias
Are the cables required included in the hud package? I've got already the three cell cable splitter from narked@90 and the cells support with the extra port for the extra gland. So all I need are the cables and good soldering skils, or someone to do the job for me?

Hi,

Cables are included, of course.

regards,
Matthias