OSTCTools - New Version
Posted: Monday 18. September 2017, 18:38
Hello,
There is a new Version of OSTCTools availible.
New:
Latest functions for OSTC4 (Button sensitivity)
Fix: OSTC2/Plus Model detection.
Remove of the registration screen. No more searial neccessary.
There are Three setup files availible.
- ostctools-hwos-setup.exe
for The latest OSTCs (including all OSTC with HWOS firmware)
OSTC4, OSTC2, OSTC3, OSTC3+, OSTC cR and OSTC Sport.
- ostctools-ostc2n-setup.exe
for the old OSTC 2N/C
- ostctools-setup.exe
a setup including all OSTC-Tools.
You can Download the OSTCTools free of charge at:
ostctools.angermayr.eu
or
www.angermayr.eu
Best regards
Rob
Hallo zusammen,
Es gibt mal wieder eine neue Version der OSTCTools.
Neu:
OSTC4 Button Sensitivyty
Fix:
OSTC2/Plus Modell erkennung.
Ich habe den Registrierungsdialog entfernt. Eine Seriennummer ist nicht mehr nötig.
Es gibt nun drei Setups zum Download:
- ostctools-hwos-setup.exe
für die aktuellen OSTCs (inklusiver aller OSTCs mit HWOS Firmware)
OSTC4, OSTC2, OSTC3, OSTC3+, OSTC cR and OSTC Sport.
- ostctools-ostc2n-setup.exe
für den alten OSTC 2N/C (mit den Custom Functions)
- ostctools-setup.exe
ein Setup für alle Modelle.
Die OSTCTools können wie immer hier kostenlos downgeloaded werden:
ostctools.angermayr.eu
oder
www.angermayr.eu
Viele Grüße
Rob
There is a new Version of OSTCTools availible.
New:
Latest functions for OSTC4 (Button sensitivity)
Fix: OSTC2/Plus Model detection.
Remove of the registration screen. No more searial neccessary.
There are Three setup files availible.
- ostctools-hwos-setup.exe
for The latest OSTCs (including all OSTC with HWOS firmware)
OSTC4, OSTC2, OSTC3, OSTC3+, OSTC cR and OSTC Sport.
- ostctools-ostc2n-setup.exe
for the old OSTC 2N/C
- ostctools-setup.exe
a setup including all OSTC-Tools.
You can Download the OSTCTools free of charge at:
ostctools.angermayr.eu
or
www.angermayr.eu
Best regards
Rob
Hallo zusammen,
Es gibt mal wieder eine neue Version der OSTCTools.
Neu:
OSTC4 Button Sensitivyty
Fix:
OSTC2/Plus Modell erkennung.
Ich habe den Registrierungsdialog entfernt. Eine Seriennummer ist nicht mehr nötig.
Es gibt nun drei Setups zum Download:
- ostctools-hwos-setup.exe
für die aktuellen OSTCs (inklusiver aller OSTCs mit HWOS Firmware)
OSTC4, OSTC2, OSTC3, OSTC3+, OSTC cR and OSTC Sport.
- ostctools-ostc2n-setup.exe
für den alten OSTC 2N/C (mit den Custom Functions)
- ostctools-setup.exe
ein Setup für alle Modelle.
Die OSTCTools können wie immer hier kostenlos downgeloaded werden:
ostctools.angermayr.eu
oder
www.angermayr.eu
Viele Grüße
Rob