Page 1 of 1
Could not connect to at 115200
Posted: Friday 25. September 2020, 16:45
by Keroy
i'm trying to update my ostc 2N and bootload said me
Could not connect to at 115200
ERROR!
how can i know the port?
Re: Could not connect to at 115200
Posted: Sunday 27. September 2020, 11:14
by Clownfish
There has not been an update to 2N software for many years.
Re: Could not connect to at 115200
Posted: Sunday 27. September 2020, 12:42
by heinrichsweikamp
Keroy wrote: ↑Friday 25. September 2020, 16:45
how can i know the port?
Look it up in the Windows device manager (COM&LPT Ports) or try "search" Button in the Tiny Bootloader.
regards,
Matthias
Re: Could not connect to at 115200
Posted: Sunday 4. April 2021, 15:30
by Keroy
[img]
https://drive.google.com/file/d/1CEQWeb ... sp=sharing[/img]
i don't find COM&LPT Ports and with "search" Button don't find any thing
Re: Could not connect to at 115200
Posted: Monday 5. April 2021, 10:54
by heinrichsweikamp
Manually install the FTDI driver:
https://ftdichip.com/drivers/vcp-drivers/ then.
This also can be a defective USB cable if the unit is detected by your PC properly.
Regards,
Matthias
Re: Could not connect to at 115200
Posted: Tuesday 6. April 2021, 07:56
by Keroy
hi
i use your link like driver for ostc, it's go away from unkwnon device, but bootloader didn't find it
i have change the cable, but nothin change.
The battery color change when i put inside the usb plug
Re: Could not connect to at 115200
Posted: Tuesday 6. April 2021, 12:54
by heinrichsweikamp
Is the unit now shown in the Windows device manager? If yes, what COM-Port number has been assigned?
Regards,
Matthias
Re: Could not connect to at 115200
Posted: Thursday 8. April 2021, 08:39
by Keroy
no it'snt it's desapered
Re: Could not connect to at 115200
Posted: Thursday 8. April 2021, 22:08
by heinrichsweikamp
Hi,
Then replace the cable.
Regards,
Matthias