Search found 4333 matches
- Wednesday 8. May 2024, 16:08
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: OSTC Plus Bluetooth Pairing problem - Android
- Replies: 18
- Views: 9778
Re: OSTC Plus Bluetooth Pairing problem - Android
Hi, With older OSTC2, the Bluetooth reset from the FAQ is still valid. OSTC with the newer Bluetooth Chipset (approx since the year 2020), the Bluetooth Reset from the menu does the same as the Bluetooth-Reset procedure from the FAQ. Try both. But if Windows can connect to your OSTC nominally, it's ...
- Monday 29. April 2024, 12:45
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: hwOS TECH: New Firmware 3.21
- Replies: 8
- Views: 56104
Re: hwOS TECH: New Firmware 3.21
Continue here: viewtopic.php?t=22518
- Monday 29. April 2024, 12:45
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: hwOS TECH: New Firmware 3.22
- Replies: 6
- Views: 358
hwOS TECH: New Firmware 3.22
Hello, ENGLISH: The new hwOS tech (for OSTC3, OSTC plus, OSTC+, cR, OSTC 2 and OSTC sport (mod. 19)) firmware 3.22 is now available for download: https://heinrichsweikamp.com/service/firmwares [3.22] MD5: 9a86e4c2452b55a4dc9a043fbfa1ca71 FIX: minor fix of 12h time update in dive mode NEW: Add charge...
- Tuesday 23. April 2024, 08:33
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: hwOS TECH: New Firmware 3.21
- Replies: 8
- Views: 56104
Re: hwOS TECH: New Firmware 3.21
Hi,
The 3.22 will be published in the next days.
Regards,
Matthias
The 3.22 will be published in the next days.
Regards,
Matthias
- Monday 22. April 2024, 13:22
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Compass - bearing
- Replies: 2
- Views: 1701
Re: Compass - bearing
Hi,
The bearing is shown with this green marker in the dive mode. Red is the counter course (+180°)
The small numbers you mention is the stopwatch which replaces the temperature when the compass is shown.
The bearing is not shown as figures in the dive mode.
regards,
Matthias
The bearing is shown with this green marker in the dive mode. Red is the counter course (+180°)
The small numbers you mention is the stopwatch which replaces the temperature when the compass is shown.
The bearing is not shown as figures in the dive mode.
regards,
Matthias
- Tuesday 16. April 2024, 08:51
- Forum: OSTC 4
- Topic: Middle button does not work anymore
- Replies: 3
- Views: 1446
Re: Middle button does not work anymore
Hi,
The magnet reset in the OSTC 4 does the same as removing the battery and re-inserting it. This will not adjust the buttons.
We're in contact with Christoph already and will take care of this.
Matthias
The magnet reset in the OSTC 4 does the same as removing the battery and re-inserting it. This will not adjust the buttons.
We're in contact with Christoph already and will take care of this.
Matthias
- Tuesday 2. April 2024, 19:18
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Cannot connect 2C and 2N to windows 11 laptop
- Replies: 11
- Views: 13567
- Tuesday 2. April 2024, 18:24
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: OSTC 2N button doesn't work
- Replies: 4
- Views: 1439
Re: OSTC 2N button doesn't work
and we replaced the buttons in this OSTC 2N...
- Tuesday 2. April 2024, 18:21
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Feature request: safety stop depth adjustment
- Replies: 1
- Views: 3943
Re: Feature request: safety stop depth adjustment
Hi,
You can configure this with HWOS Config or Subsurface.
https://www.angermayr.eu/index.php/de/s ... ostc-tools
You posted this in the wrong forum, we'll move this thread now.
Regards,
Matthias
You can configure this with HWOS Config or Subsurface.
https://www.angermayr.eu/index.php/de/s ... ostc-tools
You posted this in the wrong forum, we'll move this thread now.
Regards,
Matthias
- Thursday 14. March 2024, 18:16
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: hwOS Sport: New Firmware 10.77
- Replies: 0
- Views: 8079
hwOS Sport: New Firmware 10.77
Hello, The new hwOS sport firmware 10.77 is now available for download: https://heinrichsweikamp.com/service/firmwares The following changes have been applied: [10.77] NEW: Descent counter for Apnoe mode NEW: Dedicated surface customview #11 for Desat-Time, No-Fly and CNS FIX: NDL was shown in norma...
- Tuesday 12. March 2024, 13:10
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Uhrzeit
- Replies: 4
- Views: 2074
Re: Uhrzeit
Hallo,
Noch einfacher geht leider nicht. Ohne Strom läuft die Uhr halt nicht weiter und der OSTC stellt auf die letzte volle Stunde vor dem Stromverlust zurück. So stimmt es immerhin einigermaßen, wenn Du es vergisst einzustellen.
Gruß,
Matthias
Noch einfacher geht leider nicht. Ohne Strom läuft die Uhr halt nicht weiter und der OSTC stellt auf die letzte volle Stunde vor dem Stromverlust zurück. So stimmt es immerhin einigermaßen, wenn Du es vergisst einzustellen.
Gruß,
Matthias
- Monday 11. March 2024, 17:22
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Uhrzeit
- Replies: 4
- Views: 2074
Re: Uhrzeit
Per Smartphone koppeln, dann ist Datum/Uhrzeit stellen ein Klick (iPhone: zwei Klicks).
Gruß,
Matthias
Gruß,
Matthias
- Monday 26. February 2024, 16:31
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: Cannot connect 2C and 2N to windows 11 laptop
- Replies: 11
- Views: 13567
Re: Cannot connect 2C and 2N to windows 11 laptop
The old Mk.2, 2N and 2C OSTC used USB-UART Chips from FTDI (And yes, we used genuine ones from reliable suppliers ;-) - These are still 100% supported from Windows 11 and FTDI provides updates for these regularly https://ftdichip.com/drivers/ Usually, Windows 11 will download these automatically whe...
- Wednesday 14. February 2024, 10:30
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: New registered user? Please read.
- Replies: 0
- Views: 8901
New registered user? Please read.
DEUTSCH: Aufgrund anhaltender, automatisierter SPAM Angriffe auf dieses Forum haben wir die Regelung zur Freischaltung neuer Benutzer geändert. Neue User müssen manuell freigeschaltet werden. Ihr habt Euch kürzlich registriert und könnt dennoch hier nicht posten? Bitte schreibt uns kurz an und nennt...
- Saturday 3. February 2024, 17:59
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Letzter TG
- Replies: 2
- Views: 2029
Re: Letzter TG
Hallo David, Die Daten für den "letzten TG" werden beim OSTC nicht aus dem Logbuch gelesen, sondern nach dem Tauchgang separat im RAM abgelegt. Ein "reboot", Firmware-Update oder Batteriewechsel setzen diese Werte ebenfalls zurück (Die Zeit "Letzter TG" startet neu, all...
- Saturday 3. February 2024, 14:39
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: V10.76 does not update
- Replies: 1
- Views: 2076
Re: V10.76 does not update
Hi,
maybe you can contact us directly with some more information? info@heinrichsweikamp.com - from here, this error description makes it hard to solve this quickly.
Regards,
Matthias
maybe you can contact us directly with some more information? info@heinrichsweikamp.com - from here, this error description makes it hard to solve this quickly.
Regards,
Matthias
boot 2024
Ab dem 20. Januar läuft wieder die "boot" in Düsseldorf. Ihr findet uns am Stand A04 in der Halle 12 und wir freuen uns, dass sich wieder einige OSTC user (Und solche, die es werden wollen) einfinden werden
- Monday 15. January 2024, 18:05
- Forum: OSTC 4
- Topic: Backplate screw size
- Replies: 3
- Views: 17005
Re: Backplate screw size
Then it's M3x4.
And you have a really old OSTC 4
email us at info@heinrichsweikamp.com - we ship screws and O-Rings for free.
Regards,
Matthias
And you have a really old OSTC 4
email us at info@heinrichsweikamp.com - we ship screws and O-Rings for free.
Regards,
Matthias
- Friday 12. January 2024, 16:15
- Forum: OSTC 4
- Topic: Backplate screw size
- Replies: 3
- Views: 17005
Re: Backplate screw size
4 screws M3x4 - for very old units it's 2 M3x4 and 2 M3x6
Regards,
Matthias
Regards,
Matthias
- Tuesday 2. January 2024, 08:47
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.5 with RTE 3.20
- Replies: 12
- Views: 106136
Re: hwOS4: New Firmware 1.6.5 with RTE 3.20
Nice computer but this power supply is poorly solved. Computer charging lasts 40 hours. And now it turns out that you have to do it once a month. Hi, An empty OSTC4 takes about 5-6hours to recharge. This is checked with every OSTC4 we ship. There are some things you can check: - Power supply is cap...
- Sunday 3. December 2023, 13:08
- Forum: OSTC 4
- Topic: hwOS4: New Firmware 1.6.5 with RTE 3.20
- Replies: 12
- Views: 106136
Re: hwOS4: New Firmware 1.6.5 with RTE 3.20
There is no change in the current consumption with this update.
Regards,
Matthias
Regards,
Matthias
- Wednesday 22. November 2023, 14:27
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: OSTN 2n Comms issues
- Replies: 6
- Views: 59341
Re: OSTN 2n Comms issues
The USB port soldering joints are inaccessible due to the potted construction in the old OSTC 2C. So a new bulkhead can not be installed.
regards,
Matthias
regards,
Matthias
- Wednesday 22. November 2023, 10:03
- Forum: OSTC Mk.2, 2N and 2C (Sold between 2007 and 2014)
- Topic: OSTC 2N Back plate replacement
- Replies: 1
- Views: 24930
Re: OSTC 2N Back plate replacement
Hi,
The backplate is potted to the battery compartment in the 2N. We do not recommend to replace this by yourself.
regards,
Matthias
The backplate is potted to the battery compartment in the 2N. We do not recommend to replace this by yourself.
regards,
Matthias
- Tuesday 21. November 2023, 11:45
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Feature request: Normal stopwatch
- Replies: 1
- Views: 26966
Re: Feature request: Normal stopwatch
You have two average depth readings. One, that is for the entire dive and the other one is linked to the stopwatch. So even if you don't need the stoppable average depth, you still have the one for the whole dive.
regards,
Matthias
regards,
Matthias
- Thursday 16. November 2023, 12:55
- Forum: OSTC 4
- Topic: TC switched to bootloader
- Replies: 12
- Views: 106617
Re: TC switched to bootloader
We have a backplate for the newer OSTC 4 (2020 and later) with a recess for the charger.
But you can see the orientation in the attached image.
attachment=0]positionierung.jpg[/attachment]
Matthias
But you can see the orientation in the attached image.
attachment=0]positionierung.jpg[/attachment]
Matthias