Hi All,
Last night I wanted to update my OSTC 2C 8539 from V3.11 to v3.13.
I used OSTC Planner on my MAC with OS X 10.10.5 for it.
I got the red screen on my 2C with written Bootloader etc. and after it nothing any more...
After 1 hours or so (I went eating) the screen was still black and no LED's on.
I disconnected it and try to wakeup pushing a button, but no luck screen stay black and when I reconnect the 2C on the computer also nothing
Today I tried to connect with TinyBootload 1, he says no PIC found. I tried also to do the reset with the magnet, USB plugged in. But still no PIC found.
What can I try to unbrick my OSTC, I go to a diving trip and I would like to use my OSTC and not my Zoop!
OSTC 2C Briked :(
-
- Posts: 4379
- Joined: Sunday 13. May 2007, 18:07
Re: OSTC 2C Briked :(
Hi,
Very likely you can recover it with the bootloader v1 (Not v2). But it's only available for Windows. The trick is described here: read.php?2,4071 (See section "If you have firmware <1.90" )
Please also see "Note 2" in this article.
Regards,
Matthias
Very likely you can recover it with the bootloader v1 (Not v2). But it's only available for Windows. The trick is described here: read.php?2,4071 (See section "If you have firmware <1.90" )
Please also see "Note 2" in this article.
Regards,
Matthias
Re: OSTC 2C Briked :(
I tried with bootloader v1 on a win7 PC.
I get all the time Error :
[quote]Connected to \\.\COM5 at 19200
HEX: 279 days old, INHX32,18Fcode+cfg, total=92928 bytes.
Searching for PIC ...Not found,
ERROR![/quote]
I tried also with the magnet as discribed in "Note 2" but still no luck.
I will write a Email at info@heinrichsweikamp.com
I get all the time Error :
[quote]Connected to \\.\COM5 at 19200
HEX: 279 days old, INHX32,18Fcode+cfg, total=92928 bytes.
Searching for PIC ...Not found,
ERROR![/quote]
I tried also with the magnet as discribed in "Note 2" but still no luck.
I will write a Email at info@heinrichsweikamp.com
-
- Posts: 4379
- Joined: Sunday 13. May 2007, 18:07
Re: OSTC 2C Briked :(
Make sure the sequence is correct for this kind of update:
- Reset the OSTC with a quite strong magnet
- then click "Write Flash" within 10 seconds
Regards,
Matthias
- Reset the OSTC with a quite strong magnet
- then click "Write Flash" within 10 seconds
Regards,
Matthias
Re: OSTC 2C Briked [Solved] :)
Hi Matthias,
Thank's for this tips.
I did it.
But right it's on his way to HW, let's hope you have more chances as me.
Thank's for this tips.
I did it.
But right it's on his way to HW, let's hope you have more chances as me.
Re: OSTC 2C Briked :(
Hi Matthias and HW team,
I got my OSTC 2c back and working.
Your service rocked!
Nicolas!
I got my OSTC 2c back and working.
Your service rocked!
Nicolas!