v2.20 : CNS% in simulation

[reivilos]

Hi team !

Here are some odd results of CNS computation in simulation mode:

Decotype: L16-GF OC
CF32: 80
CF33: 80

--- First example:

G1:*NX 30 at 0m
G2: O2 100 at 6m

Simulate 39' @ 39m
Deco -> 3'@9 6'@6 10'@3 (OK)
CNS: 83% (way too high. Should be in the vicinity of 50%)

--- Second example:

G1:* AIR 21 at 0m
G2: O2 100 at 6m

Simulate 39' @ 39m
Deco -> 4'@12 9'@9 8'@6 13'@3 (OK)
CNS > 250% (displayed in red) (Should be in the vicinity of 40%)


Any ideas ?


Olivier
OSTC 2N #3059

[Det]

Hi Olivier,

I sim the two dives in my 2n using your settings.

Here are the results:

Case1: CNS=51%
3' @ 9m (NX30)
5''@ 6m (O2)
10' @ 3m (O2)


Case2: CNS=40%
4' @ 12m (Air)
8' @ 9m (Air)
8' @ 6m (O2)
13' @ 3m (O2)

Cheers
Det

[heinrichsweikamp]

Hi,

This is what I get (p_amb=978mbar)

Example 1:
CNS=51%
3@9m
5@6m
11@3m

Example 2:
CNS=40%
4@12m
9@9m
8@6m
13@3m

Did you adjust any other CF then CF32 and CF33?

Regards,
Matthias

[reivilos]

Of course, I was talking about the results of 'Calculate Deco', not a real-time simulation (a.k.a 'Start Dive').

Here are my CFs (the ones different from default)

CF08: 50%
CF32: 80%
CF33: 80%
CF38: ON
CF43: 6000
CF44: 80%
CF54: ON
CF55: 1
CF56: 17
CF57: 17
CF58: 2
CF60: ON

And I think I found what causes the problem. It's CF54. When it's OFF, the CNS% results in the sim results are correct. When it's ON (my settings), the CNS% goes wild.

Olivier

OSTC 2N #3059

[firegnom]

Same problem here i am using version 2.21
with CF54 on strange cns results
with CF54 off cns is allright.

[swissdiving]

This is a known issue if you have CF54 on (shallowest stop first). So turn it off.