pSCR support in 2.23beta!

Legacy OSTC's
Post Reply
heinrichsweikamp
Posts: 4446
Joined: Sunday 13. May 2007, 18:07

pSCR support in 2.23beta!

Post by heinrichsweikamp »

Hi all,

We just uploaded a beta with pSCR support (New deco mode pSCR-GF): http://www.heinrichsweikamp.com/#/en/ostc_2n/firmware/

Enter counterlung ratio and O2 drop in CF62 and CF63!

Also, the new CF64 configures the color for inactive gases.



Hallo,

Wir haben gerade eine neue Beta mit pSCR Unterstützung hochgeladen (Neuer Dekomodus pSCR-GF):
http://www.heinrichsweikamp.com/#/de/ostc_2n/firmware/

Gegenlungenverhältnis und O2 Drop müssen dafür in CF62 und CF63 eingegeben werden!

Außerdem neu: Die Farbe von inaktiven Gasen kann unter CF64 konfiguriert werden.

Viele Grüße,
Matthias
Uwe S.

Re: pSCR support in 2.23beta!

Post by Uwe S. »

Hallo,

vielen Dank für die pSCR Einbindung. Ich werde sie gleich Heute Abend testen. Schön wäre es jetzt noch die Kalk/Scrubber Uhr.


Gruß Uwe
JeanDo
Posts: 238
Joined: Monday 6. December 2010, 15:43

Re: pSCR support in 2.23beta!

Post by JeanDo »

Hi Uwe,

I'd like to add the pSCR mode in OSTC Planner. Will you be able to beta-test the planning results ?

Regards,
~~~~
JeanDo, http://ostc-planner.net, OSTC Mk.2 1455, 2N 2799, DR5 171.
heinrichsweikamp
Posts: 4446
Joined: Sunday 13. May 2007, 18:07

Re: pSCR support in 2.23beta!

Post by heinrichsweikamp »

Hi,

I have someone testing the pSCR stuff in real life but don't expect the results too fast.

Cheers,
Matthias
Solodiver
Posts: 397
Joined: Wednesday 5. May 2010, 10:25

Re: pSCR support in 2.23beta!

Post by Solodiver »

Not sure if this is related to 2.23 with the new CF for adjusting the color of inactive gases, but in my gas list all gases are white/shown as active (including the inactive ones)...

HTH,
Jan
~~~
MK2 1076

my wish list: http://heinrichsweikamp.net/forum/read.php?2,4649
heinrichsweikamp
Posts: 4446
Joined: Sunday 13. May 2007, 18:07

Re: pSCR support in 2.23beta!

Post by heinrichsweikamp »

Reset/Check CF64...

Regards,
Matthias
tacks
Posts: 6
Joined: Saturday 15. May 2010, 16:14

Re: pSCR support in 2.23beta!

Post by tacks »

@ Uwe S.
Das mit der Kalkstandzeit ist und bleibt ein Streit-Thema unter RB Tauchern.
Kalk und seine Standzeiten sind Dinge, die kannst Du nicht messen. Deshalb bin ich der Meinung, dass es nicht unbedingt notwenig ist. Aber das ist ur meine persönliche Meinung.

Wenn die pSCR-Routine sauber läuft, dann sind wir schonmal einen guten Schritt weiter in der Welt der Wiederaufbereitungsanlagen.
\Andreas
---
http://www.dir-hessen.de
Doing It Right in the middle of germany
heinrichsweikamp
Posts: 4446
Joined: Sunday 13. May 2007, 18:07

Re: pSCR support in 2.23beta!

Post by heinrichsweikamp »

Hallo,

Eine 2.24beta mit funktionierendem CNS im pSCR-GF Modus laden wir noch heute hoch.

Gruß,
Matthias
heinrichsweikamp
Posts: 4446
Joined: Sunday 13. May 2007, 18:07

Re: pSCR support in 2.24beta!

Post by heinrichsweikamp »

Uwe S.

Re: pSCR support in 2.23beta!

Post by Uwe S. »

Hallo Matthias,

ich kann sie nicht finden. Ist immer noch 2.23 beta


Gruß Uwe
Uwe S.

Re: pSCR support in 2.23beta!

Post by Uwe S. »

Sorry, alles OK


Gruß Uwe
Post Reply