forum.heinrichsweikamp.com

You can have a look here : viewtopic.php?t=22607

Oups, I missed it ; thanks.

Hi,

Any idea about time schedule to solve this issue ? (for both versions 3.27 & 10.85).

Did you already found the root cause ?

Not wanting to bother you, but to know if I need to recover my old compass in my diving stuff mess, for my next dives !!!

Hi,

I don't know if it can help to find / solve this issue :

Same behavior w/ my OSTC 2 #11150 (built in 2015 or late in 2014 ?), since updated to 3.27 (was OK w/ 3.26) + calibration following your requirement
HW : 9181-3206
Sensor : 089C-6FC0

For information, I bought this charging pad : https://www.amazon.fr/dp/B0F48DK57P?ref ... asin_title

Charge is now OK, even w/ the yellow rectangle w/o searching for the good position as it is more or less "blocked" by the bungee around.

Once more, Matthias, thanks.

Thx Matthias ; an important information here w/ this only Qi 1.1 standard compatibility.

OK, done and now "T3" on the main screen (and now screen is showing 80% of battery).

Unfortunately, not charging more, still testing w/ several chargers. The OSTC is still at ambiant temp. and the charging pad led is approx 1 Hz flashing green. OSTC "on", I cannot find any position making the ...

Thanks for your reply, Matthias but I'm note sure I fully understand it. Maybe because I'm not skilled into USB interfaces and there is not only a mechanical change btw A & C ?

To my mind, it's "only" (yep, working 35 years by a car maker, I really know what means "only" ;-), new studies, new ...

Hi,

Having an issue w/ my OSTC 2 (#11150, last OS), which does not charge anymore. Battery was 63% and as I will dive at least 6 times, I decided to charge it. Arriving at 75%, it stopped to charge. I tried several chargers, using a new USC C --> A interface (limited to 18 W), the battery does not ...

Hi,

It would be great you could sell a pad charging device equipped with an USB C plug.

With the EU regulation on USB C, we have more and more C plugs chargers and adaptors C --> A are not powerful enough for most of them (the best one I noticed is only 18W, a U-Green model ; maybe the only one ...

Satyre wrote: 03 Jan 2025, 11:13 Merci beaucoup je vais essayer d,abord avec le dentifrice puis le Miror

Tiens nous au courant !

Before trying "Polywatch" (which normally do not work so much w/ mineral glass ; only on plastic), you can test w/ toothpaste (the lowest price is the best one !) or what we call in France "Miror" (for silver or copper) ; or "pierre d'argent" (this is a paste).

Something to know : if you feel ...

Hum, you're right ; we (French) use commonly "2N" io "2", a mistake.

Thx for your answer.

Hi,

For my 2N, the (last) SW is written (in Fr) as "3.25" with a previous comment about "3.25 beta" ; it means it is the "definitive" 3.25 ? And so, to be sticked in the SW part of the forum ?

Quite same for my Sport, last updated SW is 10.81 ; to be sticked as same in the SW part ?

Whatever ...

Hi, was it something like here ? viewtopic.php?t=22445

Hi

Here it is.

https://i52.servimg.com/u/f52/11/95/77/26/img_2610.jpg

https://i52.servimg.com/u/f52/11/95/77/26/img_2611.jpg

Hi,

I'll do it this weekend.

Hi,

I got an issue w/ my OSTC Sport during one dive :

Starting my (second, in the morning, approx 40' after end of the first one) dive, I thought my OSTC was still "OFF" --> I switched it "ON" by pressing both buttons at the same time. During pressing, I saw the standard diving screen (means my ...

swissdiving wrote: 27 Jan 2023, 06:02 @Montardplongeur
The OSTC 2N has to be plugged in to be charged. It cannot be wirelessly charged.

My mistake, it is a 2NE, w/o any plug

Position of the OSTC is not a question of mm, it is about a tenth of mm !

Having the issue w/ my OSTC 2N, even w/ a 30W charger ; having a big flat Wireless Charger, the issue is mainly due to the bungees avoiding having the OSTC touching the WC surface, loosing a lot of efficiency. Needing to put ...

Thanks Ralph; crystal clear.

The "no fly" is just above the "Desat" time, at least on the screen "desaturation" (w/ tissue diagram)

Maybe you did not reach the min value of saturation to warn for a no fly duration.

General question : how is calculated this "no fly" in the SW ?

Le mieux est que tu envoies un email dédié à info@heinrichsweikamp.com

Pas sûr que Matthias parle français --> en anglais, si possible.

Hi Matthias,

Christophe has an issue w/ his OSTC2, please see post #1 ; could you give him some idea about to test before maybe being obliged to send it to you ?

Christophe : as-tu regardé sur le forum les posts relatifs aux problèmes de bouton ?

Menu « paramètres » ; boutons

Valeur entre 20 et 80%, par défaut à 40. Plus tu mets une valeur élevée, plus il faudra que tu appuies fort.