forum.heinrichsweikamp.com

It's wise to take it just for being a HW's computer!

As I read you are a novice diver and I would say that this computer will satisfy all your present requirements and it will be ok for a long while of your scuba career

Hi all...

there have been any solution on this issue? as of today I'm still stucked at dive #28, I cannot import from dive #27. The two dives have the same date (10.08.2011) and same f/w ver. 1.95. Jdivelog 2.16.

davide Wrote:
-------------------------------------------------------
> HI
>
> I can traslate from english to italian ...

I'll be very glad to side Davide in this if required

Which is the way it has to work David, if you want to use a plain simulator then you have to reset your deco data before (but don't go for a ripetive dive )

mmmm... it sholud be affected by the desaturation time...

maxtosca69 Wrote:
-------------------------------------------------------
> 18.08
> Actually what i don't understand about the cf55 is
> :on default it gave me 1 min,if i do set it up
> 5min these would it be added to the 1 min
> default?
>
> Or is it just 5 min?

It goes from 1 min to 5 min total ...

Who said about the altimeter setting? what a stupid guy!

Just a stupid consideration: did you remove the bungee mount before working with the magnet?
Anyway, 2,1 meters depth means 210mb more than the cabin altitude at cruise level which means a descend form a cabin altitude of 2100 mtr... and as usual very fast! yeah,it can be... I don't see a strong ...

I was simulating a dive in JDiveLog as in Picture 1 with the following settings:

Firmware 1.86beta
Decotype: L16-GFOC
GAS1: AIR - Active
GAS4: EAN40- Active
CF16:1
CF18: 1.55
CF29: 5
CF32: 30%
CF33: 90%
CF55: 1
CF56: 17
CF57: 17

At minute 22 I passed the switch gas depth (30 mtr), stopped at 29 mt ...

Solodiver,

why don't you try to plug the Mk2 to your pc, run a simulation within Jdivelog, push it below 130 mtr. and see what happen? Nevertheless, IMO the Mk2 is intended (and sold) to dive up to 130 mtrs, so if your dives are below that depth I belive this is not the right tool to use. It was ...

I went for a double nodeco dive with 1.86 beta on and backup beside. Nothing to report, everything smooth.

As I know, if the Mk2 detects a depth below 130 mtrs it shuts down and a hard reset (with magnet) is required to restart it. Matthias can definitely provide the correct answer.

Great job!

I share Dmainou's report, several simulation carried out with this new beta and no main problems appeared!
Compared to DivePlanner (adjusted) the decoplans were very similar with one gas, closer with 2 gas and identical with 3 gas used (CF55 & CF16 = 0).

The only little thing which ...

dmainou Wrote:
>
> BTW, even though I have no coding skills, I would
> like to contribute to the project. Maybe I can
> contribute to update the English manual or
> translate it to Spanish or something like that?
>
> Please let me know if I could be of any help.
>
> D


...and if you need ...

All,

I played around a little bit more and after another CF reset the sim gave the same results as previously posted by dmainou & ujacek. These results seem to be totally wrong. Then I played around with CF 56 & 57 and the deco plan changed, strange but it changed. Following the results.

COMMON ...

According to MV-plan and Deco-Planner those values are not corrected, you can see the results on the previous posts. By heart, a 45 mtrs dive for 19 min BT will take at least 20~25 min deco.

D,

I don't have the deco software in this PC but you results are definetly wrong.

try to calculate for the first example in the post: 42m, 27min, GF20/80 and air.

D,

we come to you for diving and olny below 90 mtrs then! (jocking)

What did you change to have the deco working? Is the deco plan you obtained realistic?

nemo,

if I understood well you would like to know how to change from fresh to salt water (Süß- und Salzwasser). You have to change the salinity in the setup menu: 1.00 Kg/l in fresh (lake), then up to 1.04 Kg/l is salt water (sea).


Google trsl:
"wenn ich Sie richtig verstanden würde gerne wissen ...

Matthias,

same story as ujacek, CF reset and then only gas setup (Gas1 air @ 66 mtrs.), CF 32 (20%) and CF 33 (80%). Result? NO DECO. Mk2 rebooted and MD2 ash done.

BTW, your deco plan looks strange to me.

MV-Plan 1.5
Impostazioni: GF=20-80
m Tempo Run Gas SP
==============================
v ...

JoStein Wrote:
-------------------------------------------------------
> Hi,
>
> the uemis is much bigger then it looks on the
> pictures and compared to the shearwater predator
> the ostc is much smaller...
> The x1 is really small but the small display isn't
> really compareable to the OSTC Mk.2 ...

giz Wrote:
-------------------------------------------------------
> > Yep, it will look very nice also to the shops
> > which still have the Mk2 on stock ;)
>
>
> Received my Mk2 yesterday... that just sucks!!


giz,

I don't know where you are writing from, but in Europe usually you have a ...

nakatomi Wrote:
-------------------------------------------------------
> Looks very nice, beautiful design -
> congratulations!
>
> Oliver
> OSTC Mk2 1830

Yep, it will look very nice also to the shops which still have the Mk2 on stock

WOW,

a brand new computer! oh, let's say a MK2 with a new dress...

Is it possible to know the price?

peppe.marsala Wrote:
-------------------------------------------------------
> Hi all,
>
> just flashed 1.84 beta, logbook was checked for
> the new features and I noted a discrepancy with
> the avarage depth, please see attached files.

Ok, then I belive the sim has something wring ;)
Have a look ...