New firmware 2.57beta
Re: New firmware 2.57beta
Used for two dives on the weekend. The alternate GF feature seems to work well. Hated going back to the safety stop of needing to stay above 5 m though!
Michael
Sydney
Australia
OSTC 2 11528
Sydney
Australia
OSTC 2 11528
BUG 2.57
Hallo,
ich habe einen Fehler entdeckt. als ich von GF zu aGF gewechselt habe bekam ich die aktuelle Tiefe als ersten Decostop angezeigt für 8min. Meine Konfiguration: TX 21/35 erstes aktives Gas und NX 50 als aktives Dekogas, GF 30/85 und aGF 90/90, max. Tiefe 47m und CF55 3min. Ich denke da liegt ein Berechnungsfehler vor.
T.E.D.
Hello,
I have found an error. when I changed from GF to AGF I got the current depth appears as the first deco stop for 8min. My configuration: TX 21/35 first active gas and NX 50 as an active deco gas, GF 30/85 and AGF 90/90, max. 47m depth and CF55 3min. I think there was a calculation error.
T.E.D.
ich habe einen Fehler entdeckt. als ich von GF zu aGF gewechselt habe bekam ich die aktuelle Tiefe als ersten Decostop angezeigt für 8min. Meine Konfiguration: TX 21/35 erstes aktives Gas und NX 50 als aktives Dekogas, GF 30/85 und aGF 90/90, max. Tiefe 47m und CF55 3min. Ich denke da liegt ein Berechnungsfehler vor.
T.E.D.
Hello,
I have found an error. when I changed from GF to AGF I got the current depth appears as the first deco stop for 8min. My configuration: TX 21/35 first active gas and NX 50 as an active deco gas, GF 30/85 and AGF 90/90, max. 47m depth and CF55 3min. I think there was a calculation error.
T.E.D.
Re: New firmware 2.57beta
Still no possibility of automatic CCR setpoint changes?
-
- Posts: 816
- Joined: Saturday 30. July 2011, 07:30
Re: New firmware 2.57beta
@alcyone
I very much suspect not in this release, if at all. At the start of the thread the changes in this beta are listed.
I very much suspect not in this release, if at all. At the start of the thread the changes in this beta are listed.
Cheers,
Hansjoerg
--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424 / 647/1324 Fischer
RTFM
Hansjoerg
--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424 / 647/1324 Fischer
RTFM
-
- Posts: 4383
- Joined: Sunday 13. May 2007, 18:07
Re: New firmware 2.57beta
alcyone06 Wrote:
-------------------------------------------------------
> Still no possibility of automatic CCR setpoint
> changes?
This is (like the scrubber countdown clock) currently not planed, sorry.
regards,
Matthias
-------------------------------------------------------
> Still no possibility of automatic CCR setpoint
> changes?
This is (like the scrubber countdown clock) currently not planed, sorry.
regards,
Matthias
-
- Posts: 94
- Joined: Saturday 24. September 2011, 10:50
Re: New firmware 2.57beta
Clownfish Wrote:
-------------------------------------------------------
> Used for two dives on the weekend. The alternate
> GF feature seems to work well. Hated going back to
> the safety stop of needing to stay above 5 m
> though!
I'll get onto my desktop PC and add the latest Beta with the. 6m stop if you want.
-------------------------------------------------------
> Used for two dives on the weekend. The alternate
> GF feature seems to work well. Hated going back to
> the safety stop of needing to stay above 5 m
> though!
I'll get onto my desktop PC and add the latest Beta with the. 6m stop if you want.
OSTC 2N #4571 South Devon and loving it
-
- Posts: 127
- Joined: Saturday 11. August 2012, 17:21
Re: New firmware 2.57beta
Matthias wrote:
This is (automatic CCR setpoint changes) and (like the scrubber countdown clock) currently not planed, sorry.
So no more features for technical divers in the future? Maybe we have to look for another dive computer for technical divers.
(td)
This is (automatic CCR setpoint changes) and (like the scrubber countdown clock) currently not planed, sorry.
So no more features for technical divers in the future? Maybe we have to look for another dive computer for technical divers.
(td)
-
- Posts: 816
- Joined: Saturday 30. July 2011, 07:30
Re: New firmware 2.57beta
@66
Tec diving does not only consist of CCR.
Thats what you get from buying a recreational dive computer!
Tec diving does not only consist of CCR.
Thats what you get from buying a recreational dive computer!
Cheers,
Hansjoerg
--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424 / 647/1324 Fischer
RTFM
Hansjoerg
--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424 / 647/1324 Fischer
RTFM
-
- Posts: 94
- Joined: Saturday 24. September 2011, 10:50
Re: New firmware 2.57beta
This is the latest Beta with the safety stop adjusted to 6m. If anyone is interested.
Obviously use at your own risk.
Regards.
Obviously use at your own risk.
Regards.
OSTC 2N #4571 South Devon and loving it
-
- Posts: 4383
- Joined: Sunday 13. May 2007, 18:07
Re: New firmware 2.57beta
Smiler1968 Wrote:
-------------------------------------------------------
> This is the latest Beta with the safety stop
> adjusted to 6m. If anyone is interested.
Before this starts again, there will be CF's allowing the user to setup this without compiling the code. Most likely in the next beta...
regards,
Matthias
-------------------------------------------------------
> This is the latest Beta with the safety stop
> adjusted to 6m. If anyone is interested.
Before this starts again, there will be CF's allowing the user to setup this without compiling the code. Most likely in the next beta...
regards,
Matthias
-
- Posts: 127
- Joined: Saturday 11. August 2012, 17:21
Re: New firmware 2.57beta
Again features for recreational divers. I think the users of the OSTC have changed from technically minded to recreational divers
(td)
(td)
-
- Posts: 94
- Joined: Saturday 24. September 2011, 10:50
Re: New firmware 2.57beta
heinrichsweikamp Wrote:
-------------------------------------------------------
> Smiler1968 Wrote:
> --------------------------------------------------
> -----
> > This is the latest Beta with the safety stop
> > adjusted to 6m. If anyone is interested.
>
> Before this starts again, there will be CF's
> allowing the user to setup this without compiling
> the code. Most likely in the next beta...
>
> regards,
> Matthias
Thanks Matthias, that's great news.
-------------------------------------------------------
> Smiler1968 Wrote:
> --------------------------------------------------
> -----
> > This is the latest Beta with the safety stop
> > adjusted to 6m. If anyone is interested.
>
> Before this starts again, there will be CF's
> allowing the user to setup this without compiling
> the code. Most likely in the next beta...
>
> regards,
> Matthias
Thanks Matthias, that's great news.
OSTC 2N #4571 South Devon and loving it
Re: New firmware 2.57beta
Smiler1968 Wrote:
-------------------------------------------------------
> heinrichsweikamp Wrote:
> --------------------------------------------------
> -----
> > Smiler1968 Wrote:
> >
> --------------------------------------------------
>
> > -----
> > > This is the latest Beta with the safety stop
> > > adjusted to 6m. If anyone is interested.
> >
> > Before this starts again, there will be CF's
> > allowing the user to setup this without
> compiling
> > the code. Most likely in the next beta...
> >
> > regards,
> > Matthias
>
> Thanks Matthias, that's great news.
(tu) Thanks.
-------------------------------------------------------
> heinrichsweikamp Wrote:
> --------------------------------------------------
> -----
> > Smiler1968 Wrote:
> >
> --------------------------------------------------
>
> > -----
> > > This is the latest Beta with the safety stop
> > > adjusted to 6m. If anyone is interested.
> >
> > Before this starts again, there will be CF's
> > allowing the user to setup this without
> compiling
> > the code. Most likely in the next beta...
> >
> > regards,
> > Matthias
>
> Thanks Matthias, that's great news.
(tu) Thanks.
-
- Posts: 4383
- Joined: Sunday 13. May 2007, 18:07
Re: New firmware 2.57beta
mfoll Wrote:
> Same here with the french version: the whole "CCR
> setpoint and Gas" menu is black. English version
> works fine.
Missing texts... Sorry for that. If some native speaker can replace the English Expressions in the attached file I can upload a working version in French.
Text 61,229,110,111,229,230,231,232 TXT_DIL_C, TXT_DIL5 need a translation update...
regards and thanks,
Matthias
> Same here with the french version: the whole "CCR
> setpoint and Gas" menu is black. English version
> works fine.
Missing texts... Sorry for that. If some native speaker can replace the English Expressions in the attached file I can upload a working version in French.
Text 61,229,110,111,229,230,231,232 TXT_DIL_C, TXT_DIL5 need a translation update...
regards and thanks,
Matthias
Re: New firmware 2.57beta
heinrichsweikamp Wrote:
-------------------------------------------------------
> Smiler1968 Wrote:
> --------------------------------------------------
> -----
> > This is the latest Beta with the safety stop
> > adjusted to 6m. If anyone is interested.
>
> Before this starts again, there will be CF's
> allowing the user to setup this without compiling
> the code. Most likely in the next beta...
>
> regards,
> Matthias
Me is doing a little dance of Joy!
Now let's hope I didn't accidentally perform a rain-dance B)-
-------------------------------------------------------
> Smiler1968 Wrote:
> --------------------------------------------------
> -----
> > This is the latest Beta with the safety stop
> > adjusted to 6m. If anyone is interested.
>
> Before this starts again, there will be CF's
> allowing the user to setup this without compiling
> the code. Most likely in the next beta...
>
> regards,
> Matthias
Me is doing a little dance of Joy!
Now let's hope I didn't accidentally perform a rain-dance B)-
OSTC 2N #4807
Re: New firmware 2.57beta
Great to hear Matthias. Most of us use for tech and non-tech diving, so it needs to meet both needs. As well, this surely increases your potential market.
Michael
Sydney
Australia
OSTC 2 11528
Sydney
Australia
OSTC 2 11528
Re: New firmware 2.57beta
DTR.Diver66 Wrote:
-------------------------------------------------------
>> Matthias wrote:
>>
>> This is (automatic CCR setpoint changes) and (like
>> the scrubber countdown clock) currently not
>> planed, sorry.
>
>
> So no more features for technical divers in the
> future? Maybe we have to look for another dive
> computer for technical divers.
>
> (td)
Hi Diver66,
automatic CCR setpoint changes does not have to do much with Tec Diving.
I know very few serious Tec Divers using automatic setpoint changes for technical dives.
Most use mCCR or hCCR resp. change setpoints manually.
My half cent, Reiner
-------------------------------------------------------
>> Matthias wrote:
>>
>> This is (automatic CCR setpoint changes) and (like
>> the scrubber countdown clock) currently not
>> planed, sorry.
>
>
> So no more features for technical divers in the
> future? Maybe we have to look for another dive
> computer for technical divers.
>
> (td)
Hi Diver66,
automatic CCR setpoint changes does not have to do much with Tec Diving.
I know very few serious Tec Divers using automatic setpoint changes for technical dives.
Most use mCCR or hCCR resp. change setpoints manually.
My half cent, Reiner
Re: New firmware 2.57beta
Can I ask if there is any plan to include auto setpoint change in any future updates, if not, why not?
Thanks
Thanks
Re: New firmware 2.57beta
Just had a read of the Shearwater Petrel manual listing how to use the auto setpoint changing for CCR.....it obviously can be done!
This is a feature that is useful for Tec/CCR diving. Do not really care how the style of diving is labelled, but leaving the CCR vision handset to change setpoints automatically, then having to do it manually on the OSTC backup is not helpful. OC "tec" divers may not see this feature as any use to them but CCR divers such as myself see it as useful.
I know the sarcastic answer will be "go buy a Shearwater" but I would rather support the development of the OSTC. We have CF's to change the colour of displays that some people see as important, some of us would like this feature to be considered
This is a feature that is useful for Tec/CCR diving. Do not really care how the style of diving is labelled, but leaving the CCR vision handset to change setpoints automatically, then having to do it manually on the OSTC backup is not helpful. OC "tec" divers may not see this feature as any use to them but CCR divers such as myself see it as useful.
I know the sarcastic answer will be "go buy a Shearwater" but I would rather support the development of the OSTC. We have CF's to change the colour of displays that some people see as important, some of us would like this feature to be considered
-
- Posts: 668
- Joined: Sunday 1. January 2012, 22:41
Re: New firmware 2.57beta
If you think a Shearwater is a better choice, then this is not sarcastic I don't know much about CCR diving - so i'm wondering what other CCR divers think about this feature? Is it a "must have" or is it a "nive to have" or is it something CCR-divers don't use at all because some risks are to high?
regards,
scubatinoo
> OSTC 2N 3705 & OSTC 2 18807 <
scubatinoo
> OSTC 2N 3705 & OSTC 2 18807 <
Re: New firmware 2.57beta
Do not think it is a better choice at all and do not want to change.
The CCR handset/controller changes PPO2 setpoints automatically at preset depths. This simply reduces task loading on descent and ascent. It is one of the setpoint changing options and the simplest to dive with. Maybe not all CCR divers use it, however I use it on all shotline dives to make life easier. Whilst juggling with buoyancy control on a CCR on an ascent and letting the handset let me know (via the HUD) that it has changed a setpoint, all I want is for my backup computer to be able to do the same thing! The comment regarding the Shearwater was just to illustrate that a new computer in the same pricing ballpark has included this feature in the CCR functions.
Went with the OSTC due to it being future proof to a large degree as the firmware can be updated to reflect this type of programming change.
Hopefully HW in time will consider adding this functionality....after all this computer is aimed at more that straight forward "recreational diving". So whilst it has excellent functionality for tec OC use which is constantly being developed, can the same be done for CCR diving.
Thanks for your response scubatinoo
I see this becoming a bit of a recreational diver/tec diver/CCR diver match. This is not want I am doing here. Not aimed at you at all for responding to my post above, but just wanted an answer as to why a request for this option to be added has stirred up such
The CCR handset/controller changes PPO2 setpoints automatically at preset depths. This simply reduces task loading on descent and ascent. It is one of the setpoint changing options and the simplest to dive with. Maybe not all CCR divers use it, however I use it on all shotline dives to make life easier. Whilst juggling with buoyancy control on a CCR on an ascent and letting the handset let me know (via the HUD) that it has changed a setpoint, all I want is for my backup computer to be able to do the same thing! The comment regarding the Shearwater was just to illustrate that a new computer in the same pricing ballpark has included this feature in the CCR functions.
Went with the OSTC due to it being future proof to a large degree as the firmware can be updated to reflect this type of programming change.
Hopefully HW in time will consider adding this functionality....after all this computer is aimed at more that straight forward "recreational diving". So whilst it has excellent functionality for tec OC use which is constantly being developed, can the same be done for CCR diving.
Thanks for your response scubatinoo
I see this becoming a bit of a recreational diver/tec diver/CCR diver match. This is not want I am doing here. Not aimed at you at all for responding to my post above, but just wanted an answer as to why a request for this option to be added has stirred up such
-
- Posts: 816
- Joined: Saturday 30. July 2011, 07:30
Re: New firmware 2.57beta
@Alcyone
I am amazed. You got an answer from HW (Matthias).
The implementation of the automatic set point change is currently not planned.
How many more times do you want to ask the same question. Beyond the fact that you've already started a seperate thread for this.
So please stick with your SPAM to your own thread.
And I am being very sarcastic now:
Please buy a Petrel so you can whinge to Shearwater about all the features that are not included in the Petrel.
I am amazed. You got an answer from HW (Matthias).
The implementation of the automatic set point change is currently not planned.
How many more times do you want to ask the same question. Beyond the fact that you've already started a seperate thread for this.
So please stick with your SPAM to your own thread.
And I am being very sarcastic now:
Please buy a Petrel so you can whinge to Shearwater about all the features that are not included in the Petrel.
Cheers,
Hansjoerg
--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424 / 647/1324 Fischer
RTFM
Hansjoerg
--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424 / 647/1324 Fischer
RTFM
Re: New firmware 2.57beta
The same question was asked on this thread due to the lack of a full answer to my straight question first time around.
No need for your sarcasm!!
No need for your sarcasm!!
-
- Posts: 3
- Joined: Tuesday 11. December 2012, 16:44
Re: New firmware 2.57beta
Hello, I am new to the forum.
For a long time I use your product (2N) and before that MK2 and I must say that I find them valuable and high-level.
I read that it is not possible to implement the model of 2N VPN and I was wondering if it was not possible to enter more than the existing algorithm and have GF also automatically calculate the ratio deco.
I know perfectly well that the ratio deco or deco on the fly is managed by the diver and not a computer but in my opinion could be an excellent backup tool to those who make diving decompression using this method.
I apologize for my English is not very good
thanks
mark
For a long time I use your product (2N) and before that MK2 and I must say that I find them valuable and high-level.
I read that it is not possible to implement the model of 2N VPN and I was wondering if it was not possible to enter more than the existing algorithm and have GF also automatically calculate the ratio deco.
I know perfectly well that the ratio deco or deco on the fly is managed by the diver and not a computer but in my opinion could be an excellent backup tool to those who make diving decompression using this method.
I apologize for my English is not very good
thanks
mark
Marco Alberti
Style Diving Center
Style Diving Center
-
- Posts: 816
- Joined: Saturday 30. July 2011, 07:30
Re: New firmware 2.57beta
Hi Stylediving,
As you correctly state, HW has no intention of implementing other algorithms:
http://forum.heinrichsweikamp.com/read.php?2,2238,7572#msg-7572
And I am afraid I struggle to understand what you are trying to say. Maybe you could say it in your native tounge and someone else could translate it for us.
As you correctly state, HW has no intention of implementing other algorithms:
http://forum.heinrichsweikamp.com/read.php?2,2238,7572#msg-7572
And I am afraid I struggle to understand what you are trying to say. Maybe you could say it in your native tounge and someone else could translate it for us.
Cheers,
Hansjoerg
--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424 / 647/1324 Fischer
RTFM
Hansjoerg
--> 2N ¦ 2201 / 3892
--> OSTC4 ¦ 257 / 392 / 424 / 647/1324 Fischer
RTFM