During dive "Menu?" activates automatically, seems not normal

[chrisrms]

I noticed that during a dive the "Menu?" (bottom center of the screen with yellow background) does activate automatically several times and disappears again. I think this is not normal. I have the button sensitivity set to 95 %.

[Claude]

Hi Chrisrms,

Same for me. I put the sensitivity to 75% and no more Problem.

Just try this if needed.

[chrisrms]

Hi Claude,

thanks for feed-back.

I tried with a 90 % setting but then it's hard to change anything during dive, even changing the "View" window content is hard, I have to try several times before anything happens. It does it well though when setting is at 95 %. Hmmmm...

[swissdiving]

Actually, I've been struggling too using the buttons with thick dry gloves. Pressing the buttons just did not work properly unless I increased the sensitivity. Increasing the sensitivity caused the same problems you have.

Now I found out that if I swipe across the individual buttons (left to right) I can operate them much easier and more accurately at a lower sensitivity. You might want to give that a try under water.

[chrisrms]

I'll try during this weeks dive and send a feed-back.

Thanks for help!

Best regards

Christoph