forum.heinrichsweikamp.com

Ok, I managed to search in the old messages, I did not see the 30 days limits. I find how to do it. Push the reset for more than few seconds !

Antoine

Hello

I did not used my old OSTC (serial# 10-98) since one years. I connected to my computer this morning and nothing happend at all... No light on the screen, no sign that the battery is on charge, or what so ever.
Is it really dead or is there still some hopes to awake it ?

Tx

Antoine

I tested few minutes ago with 1.70 and behavior was the one expected. I hope I will be abble to test it soon underwater.

Antoine

From various readings on the forum, I have the feeling taht ZH-L16 without GF for OC is bugged or acting like it was with GF. Do people of HW have a comment on that ?

Antoine

Hi,

Both computers where on air and the Suunto is in moutain mode (first level). Profil is V style and I was at 43 m deepest at 17 min.

On a french speaking forum, same behavior was also reported.

For the moment I will switch to GF and enjoy the skull when I will use air

Antoine

For the scratch, would it be possible to use the resins for car glass like in carglass advertising ? Or at least to fill it with a transparent polymer/glue.

On my side, no scratches, thanks to InnODIvE suport

Hello,

I dove yesterday and since I was using air, I was in ZH-L16 OC. My back-up was a suunto Vytec DS.
Between the two computer I have 10 min deco difference.
Suunto: 2 min at 3 m
mk1: 2 min 12 m
2 mn 9 m
2 min 6 m
5 m 3m

For a dive at 42 m max, I was a bit surprised by the deco of the OSTC.

I ...

Hello,

When you have 0 m it does not take it in account for the deco calculation. So, the calculated deco time is without this gaz, except when it is selected (so you should breath it) as gaz in use.

I dive with all my gaz at 0 m (except bottom gaz), I do not like this prediction modes on my ...

Hello,

To download them on the wbesite or to upload to your computer. For the first point if you read the other messages you can find the zip. For 1.46: http://www.heinrichsweikamp.com/read.php?2,1904

Cheers,
Antoine

Hallo,

Diese Woche-ende hat Nicolas keins Problem mit seinem OSTC. Wir haben einem Trimx Tauchgang bei Thunersee gemacht.

Gruss,

Antoine

heinrichsweikamp Wrote:
-------------------------------------------------------
> Hello,
>
> With the new depth font the OSTC can not display
> depths>100m. We've written this quite often: Do
> not use the OSTC for such dives! It was never
> intend to be used below 100m! Maybe, there will be
> an ...

Hi,

A friend (Corona) was 100 m deeper with the OSTC (102 m). From his description of the OSTC behaviour, I am a bit surprised how the OSTC was programmed. At 100 m the computer stop everything with a message like: you are too deep I stop. He had to reset it after the dive, to make the computer ...

You could try to instal firefox instead asking the file by email.

I understood so.

If you set a depth for your gaz ( 6 m for oxy), the ostc will take it in account for the deco.
You can easilly test if it comes from that by switching gaz after a deco increase.

The wiki page is laking of information or I did not see it.

Antoine

And Mv-plan as the same feature than the OSTC, no more than 100 m.

Based on the same deco algorythm, http://damiensiviero.com/Diving.aspx

Some comments from Jean-Pierre about the decoplan display:

1) Could it be possible to set the decoplan display (CF ?) like this: standard as now, second the user could use a the switch to leave it. Jean-Pierre writes the information of the decoplan on his wetnotes (in case the computer crash) but ...

Pour les esprits chagrins ou ironiques...

Since it was a first dive with the OSTC I dove with my usual run time and I was playing with the menu. During my play, I fiugure out that I did not check my GF on the OSTC (stupide, I am...) and so I was looking for the information.


Matthias,
I am not ...

Hello,

I made my first dive with an OSTC yesterday evening (Riedsort, Lake of Lucerne; temp for deco is ok but visibility start to decrease).

Every thing was fine et it is realy easy to follow, switch gas. Data shown as depth or temp were really close to my vytec.

One comment: I realize under ...

Thanks Matthias,

I will reset all default values this evening.

Thanks Matthias,

With Trimix or special diving as is doing Jean-Pierre, it could go to long decosum. But if I have well understood, the decosum time could be calculated by taking care of the deco gaz or it is just calculated following the gaz selected ?

Tx,

Antoine

Hello,

Just a remark. The value to set to flip the screen is at display at 100. Since, we have to set it at 0 or 1, could it be possible to have only 0 or 1 to choose or displaid? The first seconds on CF39 were confusing until I catch this point.

Tx,

Antoine

Ok,

Does the OSTC is still calculating deco when it is display: 99min in decosum?

Is there a possibility to have one digit more, to display 124 min for example.

Thanks

Jean-Pierre,

Je suis pas sur de comprendre ton problème ?

Tu veux savoir si l'ordi est limité à 99 min de déco ou si ce n'est que l'affichage qui n'est pas suffisant ?

Tcho,

Antoine

Compare to the Suunto, I would say that the deco model is not a black box (RGBM suunto). Which really something I do not like. For sure, I would wait to know more about length of deco vs know computer before to buy it.

For OSTC: You can set your GF, change one gas during your dive.

Cochran, I do ...

Ok, it is active now. The email was slower than expected.

For the code (so without registration) I was not abble to see it with Firefox. A bug from my PC probably.

Tx,

Antoine