Search found 703 matches
- Monday 6. May 2024, 18:50
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: hwOS TECH: New Firmware 3.22
- Replies: 6
- Views: 964
Re: hwOS TECH: New Firmware 3.22
Tja, ist halt nur so, dass die Deko-Berechnung nicht auf der Wassertiefe beruht, sondern auf dem Wasserdruck. Das ist das, was vom Drucksensor kommt, und der Druckwert geht direkt weiter in die Dekoberechung. Die Faktoren für die Dichte des Wasser und die Salinität werden nur bei der Umrechung von D...
- Sunday 5. May 2024, 06:50
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Gas cont. and GF in BO in CCR mode
- Replies: 3
- Views: 145
Re: Gas cont. and GF in BO in CCR mode
:-)
The short formular here is: DCS is treatable, drowning not...
The short formular here is: DCS is treatable, drowning not...
- Saturday 4. May 2024, 15:22
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Gas cont. and GF in BO in CCR mode
- Replies: 3
- Views: 145
Re: Gas cont. and GF in BO in CCR mode
Hi Ion, For the deco calculator: 1) "gas cont." = gas contingency. When the OSTC computes the gas needs for the BO ascent, it may happen that more volume of a certain BO gas is needed than available as of the current tank settings. If this option is activated, the OSTC will switch to the n...
- Saturday 4. May 2024, 09:17
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: hwOS TECH: New Firmware 3.22
- Replies: 6
- Views: 964
Re: hwOS TECH: New Firmware 3.22
westliches Mittelmeer oder östliches Mittelmeer? Ostsee: Bereich Dänemark (Belte & Sund), oder zentrale Ostsee (östlich Schweden)? Egal ob du einen Salinity-Wert von 1%, 2% oder 3% einstellst, der Unterschied in der angezeigten Tiefe wird bei 40m weniger als 1 Meter ausmachen, in geringeren Wass...
- Saturday 24. February 2024, 19:12
- Forum: OSTC 4
- Topic: Alternative aGF?
- Replies: 4
- Views: 1490
Re: Alternative aGF?
Du stellt auf die aGF um, oder auf die Gf zurück, und der OSTC rechnet die Deko neu durch. Das macht er sowieso alle paar Sekunden, aber eben auch auf Grundlage der aktuell ausgewählten GF oder aGF.
GF: für den normalen, geplanten TG
aGF: z.B. 90/90 wenn man schnell raus muss, warum auch immer...
GF: für den normalen, geplanten TG
aGF: z.B. 90/90 wenn man schnell raus muss, warum auch immer...
- Saturday 24. February 2024, 13:06
- Forum: OSTC 4
- Topic: Alternative aGF?
- Replies: 4
- Views: 1490
Re: Alternative aGF?
Das ist ein zweiter Satz GF-Werte, auf die man während des Tauchgangs umschalten kann.
- Monday 5. February 2024, 13:45
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Gaswechsel im Tauchplan
- Replies: 4
- Views: 2174
Re: Gaswechsel im Tauchplan
Hallo David, zur Darstellung: gute Idee, leider ist hier (wie auch in vielen anderen Bereichen) der verfügbare Bildschirmplatz schon vollständig aufgebraucht. Wir kämpfen da mittlewerweile um jeden einzelnen Pixel. Die Schriften haben Unterlängen und teils variierende Laufweiten und es darf sich nic...
- Sunday 4. February 2024, 13:53
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Gaswechsel im Tauchplan
- Replies: 4
- Views: 2174
Re: Gaswechsel im Tauchplan
Hallo David, in der Deko-Berechnung verzögert der OSTC grundsätzlich alle Gaswechsel auf den nächsten Stopp. Es gab dazu vor längerer Zeit mal ein paar Diskussionen hier im Forum, aus denen die Option "extended Stopps" hervorgegangen ist, siehe unten. Die Überlegung hinter dieser Verzögeru...
- Friday 10. November 2023, 08:13
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Dekogas während der Simulation hinzufügen
- Replies: 6
- Views: 66212
Re: Dekogas während der Simulation hinzufügen
Für das Gas Nr. 6 kann man keine Tiefe einstellen, deshalb ist die Logik hier dass es sofort genommen wird. Es ist für Notfälle gedacht, wenn man z.B. ein Gas von jemandem anderen übernimmt. Ansonsten kann man unterwegs deaktivierte Gase auch wieder aktivieren, und auch deaktivierte Gase auswählen.
- Monday 9. October 2023, 06:57
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Safety stop on OSTC 2 firmware 10.75
- Replies: 3
- Views: 34880
Re: Safety stop on OSTC 2 firmware 10.75
Hello Flemming, in the OSTC implementation, there are 4 parameters involved: - opt_safety_stop_length, default 3 mins, can be 60 ... 240 seconds, - opt_safety_stop_start, default 5 meters, can be 2 m ... 6 m - this is the depth at which the safety stop counting begins / pauses, - opt_safety_stop_end...
- Sunday 8. October 2023, 18:20
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Understanding bailout values in simulation mode
- Replies: 2
- Views: 8501
Re: Understanding bailout values in simulation mode
Hi Ion, there is one more setting that goes into the gas consumption caculation: fTTS/Delay. This is the time in minutes, the OSTC assumes you stay at bottom depth - while already on bailout gas - before the actual ascent starts. This 'delay time' caters for the time needed to assess the situation &...
- Saturday 5. August 2023, 07:10
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: OSTC2 Hinweis Langsam
- Replies: 1
- Views: 6443
Re: OSTC2 Hinweis Langsam
Hallo, dieser Hinweis erscheint, wenn die berechnete Deko zu Ende ist und steht bis zum Ende des Tauchgangs. Es ist nur ein Hinweis dass man die letzten Meter langsam machen und eben nicht von 6 m oder so "hochploppen" sollte. Er bedeutet nicht, dass man irgendwas falsch gemacht hat. Die D...
- Sunday 30. July 2023, 09:23
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: OSTC Sport noch erhältlich?
- Replies: 4
- Views: 10106
Re: OSTC Sport noch erhältlich?
Hallo, wenn bestimmte Modelle nicht auf der Homepage angezeigt werden, dann kann es sein dass diese gerade nicht produziert werden, bzw. können (-> Nachwirkungen Bauteilkrise). > Können bisherige OSTC Sport noch mit Software für Trimix upgegradet werden? Klar! Alle Rechner der "neuen" 2er ...
- Saturday 1. July 2023, 13:01
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: hwOS TECH: New Firmware 3.21
- Replies: 8
- Views: 59707
Re: hwOS TECH: New Firmware 3.21
Bezüglich des "t": hier ist mal nicht die Firmware schuld, der Text in diesem Bereich wird vom verbundenen PC / der App geschickt, der OSTC stellt ihn nur dar. Und dieser Text ist leider 1 Zeichen zu lang für das Ausgabefeld...
- Monday 6. March 2023, 19:48
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Cave Edition
- Replies: 1
- Views: 3797
Re: Cave Edition
Hi, ja, das genau macht der Cave-Mode. Wir haben diese Firmware-Variante noch nicht öffentlich freigegeben und sie ist derzeit auch nicht direkt zugänglich, aber bei ernsthaftem Interesse können wir eine entsprechende OSTC-Firmware zumailen. Dazu bitte an info@heinrichsweikamp.com schreiben. Die Cav...
- Friday 3. March 2023, 11:51
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Tissue load question
- Replies: 9
- Views: 10606
Re: Tissue load question
Do you have the sport firmware? If yes, the setting may indeed been removed from the menu as with no He the N2+He view does not make any sense and there is no loss of information with only the press+sat view then. PS: a lot of information on what the tissue do and how the OSTC handles & displays...
- Friday 3. March 2023, 07:13
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Tissue load question
- Replies: 9
- Views: 10606
Re: Tissue load question
Thanks! > I would really hope this would finds its way into the manual somehow. Problem is, if everything that would be worth putting into the manual would actually go in, it would be 300++ pages... > On my OSTC Plus I don't have Display settings menu to choose between N2+He, so I assume it is alway...
- Thursday 2. March 2023, 13:29
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Tissue load question
- Replies: 9
- Views: 10606
Re: Tissue load question
As had been said before, the tissue graphics has three sections: the upper bars, the lower bars and the CNS percentage number in the middle. The meaning of the bars depends on the "Graphics" setting in the "Display Settings" menu: "N2+He" or "Pres+Sat". If &qu...
- Thursday 2. March 2023, 13:26
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Missing "No Fly" information
- Replies: 6
- Views: 6669
Re: Missing "No Fly" information
Hi, just some side note: the no-fly time is not calculated with the set GF (neither high nor low) but with 100% i.e. pure Bühlmann. Else depending on GF set, no fly may happen to never been reached...
- Friday 17. February 2023, 07:33
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: OTSC Plus / Ausschalten
- Replies: 1
- Views: 3628
Re: OTSC Plus / Ausschalten
Hallo, ein komplettes Ausschalten ist nicht vorgesehen und kann allenfalls durch Entnahme der Batterie geschehen. Es ist die bestimmungsgemäße Funktion des Tauchkomputers, dass er immerwährend die Gewebedrücke berechnet um jederzeit Tauchbereit zu sein. Die Gewebedrücke ändern sich z.B. wenn andere ...
- Wednesday 8. February 2023, 20:32
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Sensor check and diluent warning
- Replies: 2
- Views: 3824
Re: Sensor check and diluent warning
Hi, the DIL warning is given as soon as the gap between the setpoint and the ppO2 of the current pure diluent becomes 0,2 bar or less. At this point, a dil flush will not noticable bring down the measured ppO2 in the loop and thus may confuse the diver, so the alarm is to make the diver aware of thi...
- Sunday 15. January 2023, 18:15
- Forum: OSTC 4
- Topic: No fly waiting time
- Replies: 1
- Views: 6683
Re: No fly waiting time
Hi,
the OSTC2 really calculates a no-fly-time, it is done in the same way as a deco stop calculation, with the only change that the target depth is not surface pressue but an aircraft cabin altitude pressure. The OSTC4 does the traditional 24 hours count-down.
BR
Ralph
the OSTC2 really calculates a no-fly-time, it is done in the same way as a deco stop calculation, with the only change that the target depth is not surface pressue but an aircraft cabin altitude pressure. The OSTC4 does the traditional 24 hours count-down.
BR
Ralph
- Monday 26. December 2022, 15:41
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Datentransfer und Batteriekapazitität
- Replies: 9
- Views: 9538
Re: Datentransfer und Batteriekapazitität
Zur Ergänzung: das Bluetooth-Modul benötigt 3,3V, wenn eine 1,5 Volt Batterie eingelegt ist, dann muss der DC/DC Wandler zusätzlich zum normalen Strombedarf für Display und CPU auch noch für das Bluetooth-Modul Spannung "hochpumpen" und irgendwann reicht es dann nicht mehr, insb. wenn die ...
- Wednesday 7. December 2022, 23:11
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Gas List PSCR
- Replies: 3
- Views: 6063
Re: Gas List PSCR
Correct, including the 'first' gas.
- Sunday 4. December 2022, 09:15
- Forum: OSTC+, OSTC3, cR, sport and OSTC 2 (Mod. 2015 and later)
- Topic: Gas List PSCR
- Replies: 3
- Views: 6063
Re: Gas List PSCR
Hello Marv, unfortunately it is not possible to merge the OC (bailout) and loop gases into one "common pool" - that would require tremendous changes to the software. But there is at least a small "helper function" to ease the gas setup: in the Setup Tank menu, there is an option ...