forum.heinrichsweikamp.com

Hello together,
Finally I could solve MY problem. At the end it wasn't a OSTC Problem but a JDiveLog Problem.
I opened up a new page or lets call it a new project with a blank Logbook.
With that new Logbook it was possible to download all my dives on my OSTC. (More then 30 dives)!
So far it works ...

BTW clock, how can I switch between the european and american data standard:

American: mmddyy
European: ddmmyy

thx Lukas

It is still not working, the same problem! My latest dives are not possible to download!
the only strange thing I just realised, at the main screen, the date format is not the it should be:

Shown:
mmddyy
usually:
ddmmyy

might that be a problem?

Thanks for lockint into that issue again.
Lukas

Finaly here are the pics to my previous entry.

Thanks for your comments
Lukas

ts! must have been blind - will attach the particular pics 2night.

cheers Lukas

I am back from my dive holidays and do have two news (one good, one bad).

1. After the last dive done with V1.9 dropped out of my Dive computer Logbook, more new dives are getting stored. Currently they are 24! I will watch it carefully how the logbook will react once I did some more dives.

2. I ...

How can I dump that .bin File. As i sad Am not having my Laptop aviable. I just did another Dive, currently they are 19 Dives in the Logbook stored.

BY the way, i just realized - currently I am on Cave Diving vacations in
Mexico - that my Logbock still has the same memory size than before the Upgrade.(The upgrade procedure I did about 2times, it seemed to work fine) I only have about 20 Dives avaiable at my Computer. Maybe this is somehow ...

Auch ich habe nun den selben Effekt festgestellt!
Nach 10min Tauchzeit, hatte ich plötzlich einen sprunhaften Deko anstieg, analog dem ersten Bild von sulag.
Mit der V1.9 waren solche Verhalten nicht festzustellen.

Danke für die Hilfe
Lukas

I still have the same problem as NeilBedwin is describing! Even after downgreading to V1.9 and upgrading to the current one!
Any more ideas?
Lukas

...ok, I have done the downgrade to V1.9 -> as explained earlier I lost the dives done with V2.0. After that I upgraded again to V2.0 without any problems. After that I could see again all the dives stored at the OSTC in JdiveLog as well!
So far so good - I will now check out whether the future ...

I am using OC based deco model, if i am loosing my dives done with V2, I do not mind too much -as long everything works again after.

Lukas

..hmm ok I will try, but where can I download the version 1.9 - cant find a link at HW Homepage

thx for help
Lukas

Hai everybody

Does anybody also have some troubles to download the logbuch datas since updated to v2.0 (The version of JDiveLog 2.16)

1. Downloading CF working well
2. Downloading dives:
A) At the OSTC appears Interface - Start - Data - Header - Profile (as normal)
B) At the jDiveLog appears a ...

@tiefunten: thx for your answers - I will try again!

Lukas

Hello 2gether,

I do have 2 questions about the new V2 FW:

1. How is the scaling of the temperature curve in the Logbook view?
I just can't think about a refernce between the displayed value and the curve.
(The overall look is just awsome, thx)

2. In the Gaslist menue as well in the surface ...

Hello 2gether,

I do have 2 questions about the new V2 FW:

1. How is the scaling of the temperature curve in the Logbook view?
I just can't think about a refernce between the displayed value and the curve.
(The overall look is just awsome, thx)

2. In the Gaslist menue as well in the surface mode ...

... back again!
After many many trys with the magnet, out of nowhere the MKII luckylly came back with the installed Version 2.0.

Lukas

Hallo zusammen,
Nun scheint es auch mir passiert zu sein. Während dem Firmware upgrade auf V2.0 (mk2_v200_stable) habe ich folgende Aktionen im JDiveLog durchgeführt:

1. Kommunikation geprüft - CF laden - io
2. Reset des MKII mit drücken der Taste "Flash schreiben" innerhalb 10sec
3. Der MKII wurde ...

A) I generally have difficulties to interpret the Deco curve!
At the last given example from JeanDo I would estimate the following deco details:

1. After ca. 8' into the dive the first deco 3m started
2. Then it goes down to 11m for 3'
3. 13m for 2'
4. 18m for 2'

And then all the way up with some ...

.... nobody may help?

Thx for any positive input's

...also ich verstehe das Diagramm auch nicht wirklich. Auf jeden Fall kann ich diese Funktion niemandem erklären

Bitte um Erleuchtung.Es muss doch eine Funktionsbeschreibung von dieser Funktion geben.

Danke Lukas

Hello @all

It happened again, I was diving about that profile:

50m TX 21/35
EAN 50 1. Dekogas
O2 2. Dekogas
Grundzeit 20min

after the 21m stopp / 5min I went on to the 6m stopp for the rest of the deco. Once there the 21m / 2 min gas change time (in red colour - because I was to deep) apeared ...

Mir ist heute etwas ähnliches passiert:

50m TX 21/35
EAN 50 1. Dekogas
O2 2. Dekogas
Grundzeit 20min

1. Dekostopp auf EAN 50 ohne nennenswerte Ereignisse auf dem OSTC
Nach Gaswechsel umgestellt auf EAN50 - 5min Verweilzeit
2. Dekostopp auf 6m => die 21m / 2min (CF) wurden angezeigt (rot => weil zu ...

@EAD-END
Ich meine das die EAD und die END Live Berechnung (sehr schönes Feature) in der neuen Version 1.90 miteinander vertauscht worden sind.

Die END muss immer kleiner sein als die EAD soweit ich mich richtig errinnere.

Festgestellt habe ich das in der Tauch Simulation des JDiveLog, ich nehme ...